nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

04.11.2021 | ORIGINAL ARTICLE

A novel intelligent manufacturing mode with human-cyber-physical collaboration and fusion in the non-ferrous metal industry

verfasst von: Qing Liu, Min Liu, Zichun Wang, Feng Yan, Yingyi Ma, Weiming Shen

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-2/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The non-ferrous metal industry is one of the most important parts of China’s process industry and has an extremely important strategic position in the national economy. However, there are many problems in the process of non-ferrous metal smelting: (1) The utilization rate of resource and energy is low in the production process. (2) Large amount of waste emissions have caused prominent environmental problems. (3) The added value of non-ferrous metals is low; besides, the product homogenization is serious. To solve these problems, a novel intelligent manufacturing mode with human-cyber-physical(HCP)collaboration and fusion is constructed from three aspects: (1) an intelligent manufacturing system with HCP collaboration and fusion, (2) a service-based ecosystem platform, and (3) a sustainable business model. The proposed manufacturing mode can make the process of non-ferrous smelting safe, efficient, intelligent, and green. A case study on the largest copper smelting enterprise in the world elaborates the digital twin-based manufacturing system collaborative platform architecture, the framework of the service-based ecosystem platform, and the sustainable business model canvas, which are built by the proposed intelligent manufacturing mode. The results of this paper contribute to the research and practice of non-ferrous metals enterprise’s manufacturing mode.

Vorheriger Artikel The effect of WAAM process parameters on process conditions and production metrics in the fabrication of single-pass multi-layer wall artifacts

Nächster Artikel A novel accurate positioning method of reference hole for complex surface in aircraft assembly

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Yuan X, Gui W, Chen X, et al (2018) Transforming and upgrading nonferrous metal industry with artificial intelligence. Chinese J Eng Sci 20:59. https://doi.org/10.15302/j-sscae-2018.04.010

Ahmad T, Zhang D, Huang C et al (2021) Artificial intelligence in sustainable energy industry: status quo, challenges and opportunities. J Clean Prod 289:125834. https://doi.org/10.1016/j.jclepro.2021.125834CrossRef

Haenlein M, Kaplan A (2019) A brief history of artificial intelligence: on the past, present, and future of artificial intelligence. Calif Manage Rev 61:5–14. https://doi.org/10.1177/0008125619864925CrossRef

Wu F, Lu C, Zhu M et al (2020) Towards a new generation of artificial intelligence in China. Nat Mach Intell 2:312–316. https://doi.org/10.1038/s42256-020-0183-4CrossRef

Mosenia A, Jha NK (2017) A comprehensive study of security of internet-of-things. IEEE Trans Emerg Top Comput 5:586–602. https://doi.org/10.1109/TETC.2016.2606384CrossRef

Sisinni E, Saifullah A, Han S et al (2018) Industrial internet of things: challenges, opportunities, and directions. IEEE Trans Ind Informatics 14:4724–4734. https://doi.org/10.1109/TII.2018.2852491CrossRef

Varghese B, Buyya R (2018) Next generation cloud computing: new trends and research directions. Futur Gener Comput Syst 79:849–861. https://doi.org/10.1016/j.future.2017.09.020CrossRef

Ren J, Yu G, He Y, Li GY (2019) Collaborative cloud and edge computing for latency minimization. IEEE Trans Veh Technol 68:5031–5044. https://doi.org/10.1109/TVT.2019.2904244CrossRef

Iqbal R, Doctor F, More B et al (2020) Big data analytics: computational intelligence techniques and application areas. Technol Forecast Soc Change 153:1. https://doi.org/10.1016/j.techfore.2018.03.024CrossRef

10.

Cui Y, Kara S, Chan KC (2020) Manufacturing big data ecosystem: a systematic literature review. Robot Comput Integr Manuf 62:101861. https://doi.org/10.1016/j.rcim.2019.101861CrossRef

11.

Tao F, Zhang H, Liu A, Nee AYC (2019) Digital twin in industry: state-of-the-art. IEEE Trans Ind Informatics 15:2405–2415. https://doi.org/10.1109/TII.2018.2873186CrossRef

12.

Koren Y (2010) The global manufacturing revolution: product-process-business integration and reconfigurable systems. John Wiley & SonsCrossRef

13.

Zhou J, Li P, Zhou Y et al (2018) Toward new-generation intelligent manufacturing. Engineering 4:11–20. https://doi.org/10.1016/j.eng.2018.01.002CrossRef

14.

Aazam M, Zeadally S, Harras KA (2018) Deploying fog computing in industrial internet of things and industry 4.0. IEEE Trans Ind Informatics 14:4674–4682. https://doi.org/10.1109/TII.2018.2855198CrossRef

15.

Boyes H, Hallaq B, Cunningham J, Watson T (2018) The industrial internet of things (IIoT): an analysis framework. Comput Ind 101:1–12. https://doi.org/10.1016/j.compind.2018.04.015CrossRef

16.

Beier G, Ullrich A, Niehoff S, et al (2020) Industry 4.0: how it is defined from a sociotechnical perspective and how much sustainability it includes – a literature review. J Clean Prod 259:120856. https://doi.org/10.1016/j.jclepro.2020.120856

17.

Ghobakhloo M (2020) Industry 4.0, digitization, and opportunities for sustainability. J Clean Prod 252:119869. https://doi.org/10.1016/j.jclepro.2019.119869

18.

Keiningham T, Aksoy L, Bruce HL et al (2020) Customer experience driven business model innovation. J Bus Res 116:431–440. https://doi.org/10.1016/j.jbusres.2019.08.003CrossRef

19.

Laukkanen M, Tura N (2020) The potential of sharing economy business models for sustainable value creation. J Clean Prod 253:120004. https://doi.org/10.1016/j.jclepro.2020.120004CrossRef

20.

Savolainen J, Collan M (2020) How additive manufacturing technology changes business models? – review of literature. Addit Manuf 32:101070. https://doi.org/10.1016/j.addma.2020.101070CrossRef

21.

Saebi T, Lien L, Foss NJ (2017) What drives business model adaptation? The impact of opportunities, threats and strategic orientation. Long Range Plann 50:567–581. https://doi.org/10.1016/j.lrp.2016.06.006CrossRef

22.

Teece DJ (2010) Business models, business strategy and innovation. Long Range Plann 43:172–194. https://doi.org/10.1016/j.lrp.2009.07.003CrossRef

23.

Parry Z (2014) Book review: business model generation: a handbook for visionaries, game changers, and challengers. Int J Entrep Innov 15:137–138. https://doi.org/10.5367/ijei.2014.0149CrossRef

24.

Joyce A, Paquin RL (2016) The triple layered business model canvas: a tool to design more sustainable business models. J Clean Prod 135:1474–1486. https://doi.org/10.1016/j.jclepro.2016.06.067CrossRef

25.

Wirtz BW, Pistoia A, Ullrich S, Göttel V (2016) Business models: origin, development and future research perspectives. Long Range Plann 49:36–54. https://doi.org/10.1016/j.lrp.2015.04.001CrossRef

26.

Foss NJ, Saebi T (2017) Fifteen years of research on business model innovation. J Manage 43:200–227. https://doi.org/10.1177/0149206316675927CrossRef

27.

Li F (2020) The digital transformation of business models in the creative industries: a holistic framework and emerging trends. Technovation 92–93:102012. https://doi.org/10.1016/j.technovation.2017.12.004CrossRef

28.

Chesbrough H (2010) Business model innovation: opportunities and barriers. Long Range Plann 43:354–363. https://doi.org/10.1016/j.lrp.2009.07.010CrossRef

29.

Frank AG, Dalenogare LS, Ayala NF (2019) Industry 4.0 technologies: implementation patterns in manufacturing companies. Int J Prod Econ 210:15–26. https://doi.org/10.1016/j.ijpe.2019.01.004CrossRef

30.

Rojko A (2017) Industry 4.0 concept: background and overview. Int J Interact Mob Technol 11:77–90. https://doi.org/10.3991/ijim.v11i5.7072CrossRef

31.

Ślusarczyk B, Haseeb M, Hussain HI (2019) Fourth industrial revolution: a way forward to attain better performance in the textile industry. Eng Manag Prod Serv 11:52–69. https://doi.org/10.2478/emj-2019-0011CrossRef

32.

Ibarra D, Ganzarain J, Igartua JI (2018) Business model innovation through industry 4.0: a review. Procedia Manuf 22:4–10. https://doi.org/10.1016/j.promfg.2018.03.002CrossRef

33.

Beverungen D, Müller O, Matzner M et al (2019) Conceptualizing smart service systems Electron Mark 29:7–18. https://doi.org/10.1007/s12525-017-0270-5CrossRef

Titel: A novel intelligent manufacturing mode with human-cyber-physical collaboration and fusion in the non-ferrous metal industry
verfasst von: Qing Liu
Min Liu
Zichun Wang
Feng Yan
Yingyi Ma
Weiming Shen
Publikationsdatum: 04.11.2021
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-2/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-08250-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-2/2022

Experimental investigation on granite cutting by means of diamond frame saw

Investigation of high speed cutting performance and phase transformation behavior of NiTi shape memory alloys

Tool-path continuity determination based on machine learning method

Transferability of the working envelope approach for parameter selection and optimization in thin wall WAAM

Study on time characteristics of coupling discharge in pulsed laser–induced twin TIG welding

A smart operator advice model by deep learning for motion recognition in human–robot coexisting assembly line

Premium Partner

Marktübersichten