Liquid water absorption in dried Norway spruce timber measured with CT scanning and viewed as a percolation process

Liquid flow in dried wood is complicated to study, since wood is a nonhomogeneous, hygroscopic-porous, anisotropic material. However, liquid flow is important to understand, since it has an influence on the durability of wood and on such processes like impregnation, drying, surface treatment, etc. In this study, simulations of liquid water absorption in wood as a fibre network, percolation, were compared with experimental water absorption in the longitudinal direction in spruce timber. With CT scanning, water distribution during liquid flow can be shown visually and measured by image processing. Liquid water absorption in end grain of spruce was measured with CT scanning after 1, 3, 7 and 14 days of liquid water absorption and shown as moisture content (MC) profiles in heartwood and sapwood. It was found that the amount of water absorbed could be expressed as a linear function of the square root of time. The slopes of the lines differed between sapwood and heartwood and also varied depending on the growth condition of the trees. The simulations according to the percolation method show generally good agreement with the measured results for sapwood.