nach oben

Rheologica Acta

Erschienen in:

07.12.2017 | Original Contribution

Rheological studies and optimization of Herschel-Bulkley flow parameters of viscous karaya polymer suspensions using GA and PSO algorithms

verfasst von: Geetanjali Chauhan, Amit Verma, Akashdeep Das, Keka Ojha

Erschienen in: Rheologica Acta | Ausgabe 3/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Rheological characteristics of gum karaya suspensions which is proposed as a fracturing fluid were investigated with the main objective to determine the yield stress and other rheological parameters using various models. The flow hysteresis confirms the thixotropic behavior of fluid with increased structural breakdown at higher concentration and temperature. An empirical model developed for the studied samples accurately predicts the temperature and polymer concentration sensitivity of the apparent viscosity. The Herschel-Bulkley model showed the best fit to the experimental data; however, the yield stress obtained from some of the samples using nonlinear regression (NL) method reported physically insignificant, negative values. The proposed optimization technique, i.e., “Particle Swarm Optimization” offered the most realistic results with faster convergence over genetic algorithm making it a better choice. The oscillatory study provided more reliable yield stress values and revealed the thermogelation behavior of polymer suspensions making it suitable for high-temperature fracturing application.

Vorheriger Artikel Nonlinear viscoelasticity of fat crystal networks

Nächster Artikel Correction to: Rheological studies and optimization of Herschel-Bulkley flow parameters of viscous karaya polymer suspensions using GA and PSO algorithms

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Alander JT (1992) On optimal population size of genetic algorithms. Presented at CompEuro 92 held at Hague, Netherlands, 4-8 May 1992. Published in IEEE Comp Sys SoftwEng proceedings 65-72. https://doi.org/10.1109/CMPEUR.1992.218485

American Petroleum Institute (2014) Recommended practice for field testing water based drilling fluids, 5th edn. API 13B-2

Augusto PED, Cristianini M, Ibarz A (2012) Effect of temperature on dynamic and steady-state shear rheological properties of siriguela (Spondiaspurpurea L.) pulp. J Food Eng 108(2):283–289. https://doi.org/10.1016/j.jfoodeng.2011.08.015 CrossRef

Barnes HA (1997) Thixotropy: a review. J Non-Newtonian Fluid Mech 70(1-2):1–33. https://doi.org/10.1016/S0377-0257(97)00004-9 CrossRef

Barnes HA, Walters K (1985) The yield stress myth. Rheol Acta 24(4):323–326. https://doi.org/10.1007/BF01333960 CrossRef

Benchabane A, Bekkour K (2008) Rheological properties of carboxymethyl cellulose (CMC) solutions. Colloid Polym Sci 286(10):1173–1180. https://doi.org/10.1007/s00396-008-1882-2 CrossRef

Bingham EC (1922) Fluidity and plasticity, 1st edn. New McGraw-Hill, Newyork

Brito ACF, Sierakowski MR, Reicher F, Feitosa JPA, De Paula RCM (2005) Dynamic rheological study of Sterculia Striata and karaya polysaccharides in aqueous solution. Food Hydrocoll 19(5):861–867. https://doi.org/10.1016/j.foodhyd.2004.10.035 CrossRef

Casson N (1959) Flow equation for pigment oil suspensions of the printing ink type. In: Mills CC (ed) Rheology of disperse systems. Pergamon Press, Oxford

Chaudhuri A, Wereley NM, Radhakrishnan R, Choi SB (2006) Rheological parameter estimation for a ferrous nanoparticle-based magneto rheological fluid using genetic algorithms. J Intell Mater Syst Struct 17(3):261–269. https://doi.org/10.1177/1045389X06063038 CrossRef

Cheng DCH (1986) Yield stress: a time-dependent property and how to measure it. Rheol Acta 25(5):542–554. https://doi.org/10.1007/BF01774406 CrossRef

Chhabra RP, Richardson JF (2008) Non-newtonian flow and applied rheology, 2nd edn. Butterworth Heinemann, Oxford

Cyriac F, Lugt PM, Bosman R (2015) On a new method to determine the yield stress in lubricating grease. Tribol Trans 58(6):1021–1030. https://doi.org/10.1080/10402004.2015.1035414 CrossRef

Dak M, Verma RC, Jaaffrey SN (2007) Effect of temperature and concentration on rheological properties of “Kesar” mango juice. J Food Eng 80(4):1011–1015. https://doi.org/10.1016/j.jfoodeng.2006.08.011 CrossRef

Dea ICM (1989) Industrial polysaccharides. Pure Appl Chem 61:1315–1322CrossRef

Deb K, Padhyei N (2010) Improving a particle swarm optimization algorithm using an evolutionary algorithm framework. KanGAL Report Number 2010003

Deswal A, Singh Deora N, Mishra HN (2014) Effect of concentration and temperature on the rheological properties of oat milk. Food Bioproc Technol 7(8):2451–2459. https://doi.org/10.1007/s11947-014-1332-8 CrossRef

Dinkgreve M, Paredes J, Denn MM, Bonn D (2016) On different ways of measuring “the” yield stress. J Non-Newtonian Fluid Mech 238:233–241. https://doi.org/10.1016/j.jnnfm.2016.11.001 CrossRef

Dorigo M (2008) Particle swarm optimization. Scholarpedia 3(11):1486. https://doi.org/10.4249/scholarpedia.1486 CrossRef

Durand A (2007) Aqueous solutions of amphiphilic polysaccharides: concentration and temperature effect on viscosity. Eur Polym J 43:1744–1753CrossRef

Eberhart RC, Shi Y (1998) Comparison between genetic algorithms and particle swarm optimization. In: Porto VW, Saravanan N, Waagen D, Eiben AE (eds) Evolutionary Programming VII. EP 1998. Lecture Notes in Computer Science, vol 1447. Springer, Berlin, pp 611–616. https://doi.org/10.1007/BFb0040812

Esmin AAA, Lambert-Torres G (2012) Application of particle swarm optimization to optimal power systems. Int J Innov Comput Inf Control 8:1705–1716

Filip P, David J, Pivokonsky R (2011) On an annular pumping of the vocadlo-type fluids, Recent advances in fluid mechanics and heat & mass transfer. Presented at 9th, Fluid mechanics and aerodynamics International conference, Florence, Italy. 239–244.

Fong CFCM, Dekee D (1994) Yield stress and small amplitude oscillatory flow in transient networks. Ind Eng Chem Res 33(10):2374–2376. https://doi.org/10.1021/ie00034a018 CrossRef

Ghica MV, Hîrjau M, Lupuleasa D, Dinu-Pîrvu CE (2016) Flow and thixotropic parameters for rheological characterization of hydrogels. Molecules 21(6):786. https://doi.org/10.3390/molecules21060786 CrossRef

Goldberg D (1989) Genetic algorithms in search optimization and machine learning. Kluwer Academic Publishers, Boston

Goldstein AM (1954) Natural plant hydrocolloids. Advances in Chemistry (ACS), Washington DC

Graef VD, Depypere F, Minnaert M, Dewettinck (2011) Chocolate yield stress as measured by oscillatory rheology. Food Res Int 44(9):2660–2665. https://doi.org/10.1016/j.foodres.2011.05.009 CrossRef

Halmos AL, Tiu C (1981) Liquid food stuffs exhibiting yield stress and shear-degradability. J Texture Stud 12(1):39–46. https://doi.org/10.1111/j.1745-4603.1981.tb00534.x CrossRef

Hassan PA, Candau SJ, Kern F, Manohar C (1998) Rheology of wormlike micelles with varying hydrophobicity of the counter ion. Langmuir 14(21):6025–6029. https://doi.org/10.1021/la980335i CrossRef

Hemphil T, Campos W, Pilehvari A (1993) Yield-power law model accurately predicts mud rheology. Oil Gas J 91:45–50

Hernandez MJ (1996) Caracterizacionreologica de hidrogeles de MCC-NaCMC + almidon.Tixotropa y sinergismo. Ph.D. thesis, Universitat de Valencia, Valencia, Spain

Herschel WH, Bulkley R (1926) Konsistenzmessungen von gummibenzollosungen. Kolloid-Z 39(4):291–300. https://doi.org/10.1007/BF01432034 CrossRef

Holland JH (1975) Adaptation in natural and artificial systems: an introductory analysis with applications to biology, control, and artificial intelligence. University of Michigan Press, Ann Arbor

Jones KO (2005) Comparison of genetic algorithm and particle swarm optimization for Optimal Power Flow Including FACTS devices. Published in Power Tech, 2007 IEEE, Lausanne. https://doi.org/10.1109/PCT.2007.4538470

Kaur S, Das M (2014) Study on the effect of concentration and temperature on rheological properties of whole barley flour suspension by using Mitschka method. J Texture Stud 45(2):164–171. https://doi.org/10.1111/jtxs.12061 CrossRef

Kelessidis VC, Maglione R (2008) Yield stress of water-bentonite dispersions. Colloids Surf A Physicochem Eng Asp 318(1-3):217–226. https://doi.org/10.1016/j.colsurfa.2007.12.050 CrossRef

Kelessidis VC, Maglione R, Tsamantaki C, Aspirtakis Y (2006) Optimal determination of rheological parameters for Herschel–Bulkley drilling fluids and impact on pressure drop, velocity profiles and penetration rates during drilling. J Pet Sci Eng 53(3-4):203–224. https://doi.org/10.1016/j.petrol.2006.06.004 CrossRef

Kennedy J, Eberhart R (1995) Particle swarm optimization. Proceedings of IEEE Int Conf Neural Netw 1942-1948. https://doi.org/10.1109/ICNN.1995.488968

Kesavan S, Prudhomme RK (1992) Rheology of guar and hpg cross-linked by borate. Macromolecules 25(7):2026–2032. https://doi.org/10.1021/ma00033a029 CrossRef

Khalil KE, Ramakrishna P, Nanjundaswamy AM, Patwardhan MV (1989) Rheological behaviour of clarified banana juice: effect of temperature and concentration. J Food Eng 10:231–240CrossRef

Khataniar S, Chukwu GA, Hua X (1994) Evaluation of rheological models and application to flow regime determination. J Pet Sci Eng 11(2):155–164. https://doi.org/10.1016/0920-4105(94)90036-1 CrossRef

Koocheki A, RazaviSeyed MA (2009) Effect of concentration and temperature on flow properties of alyssum homolocarpum seed gum solutions: assessment of time dependency and thixotropy. Food Biophys 4(4):353–364. https://doi.org/10.1007/s11483-009-9134-7 CrossRef

Lei C, Clark PE (2005) Fracturing fluid crosslinking at low polymer concentration. Presented at SPE Annual Technical Conference and Exhibition, 9-12 October 2005, Dallas, Texas, SPE-96937-MS. https://doi.org/10.2118/96937-MS

Lim CP, Lakhmi CJ, Dehuri S (eds) (2009) Innovations in swarm intelligence. In Studies in Computational Intelligence. Springer-Verlag, Berlin. https://doi.org/10.1007/978-3-642-04225-6

Maglione R, Ferrario G (1996) Equations determine flow states for yield-pseudoplastic drilling fluids. Oil Gas J 63:63–65

Man KF, Tang KS, Kwong S (1996) Genetic algorithms: concepts and applications. IEEE trans on industrial. Electronics 43:519–534

Mitsoulis E (2007) Flows of viscoplastic materials: models and computations. Rheol Rev:135–178

Mizrah S, Berk Z (1972) Flow behaviour of concentrated orange juice: mathematical treatment. Texture Stud 3(1):69–79. https://doi.org/10.1111/j.1745-4603.1972.tb00610.x CrossRef

Mohamed L, Christie M, Demyanov V (2010) Comparison of stochastic sampling algorithms for uncertainty quantification. SPE J 15(1):31–38. https://doi.org/10.2118/119139-PA CrossRef

Muller FL, Davidson JF (1994) Rheology of shear thinning polymer solutions. Ind Eng Chem Res 33(10):2364–2367. https://doi.org/10.1021/ie00034a016 CrossRef

Nguyen QD, Boger DV (1983) Yield stress measurements for concentrated suspensions. J Rheol 27:321–349CrossRef

Onwunalu JE, Durlofsky LJ (2011) A new well-pattern-optimization procedure for large-scale field development. SPE J 16(3):594–607. https://doi.org/10.2118/124364-PA CrossRef

Panda H (2005) The complete technology book on natural products (Forest based). Asia Pacific Business Press, Delhi

Parzonka W, Vocadlo J (1967) Modèle à trios paramètres pour les corps viscoplastique. Solution pour le viscosimètre rotatif type Couette. C R Acad Sci Paris Série A 264(1967):745–748

Patel SK, Malone S, Cohen C, Gillmor JR, Colby RH (1992) Elastic modulus and equilibrium swelling of poly (dimethylsiloxane) networks. Macromolecules 25(20):5241–5251. https://doi.org/10.1021/ma00046a021 CrossRef

Ponmani S, William JKM, Samuel R, Nagarajanc R, Sangwai JS (2014) Formation and characterization of thermal and electrical properties of CuO and ZnOnanofluids in xanthan gum. Colloids Surf A Physicochem Eng Asp 443:37–43. https://doi.org/10.1016/j.colsurfa.2013.10.048 CrossRef

Power D, Zamora M (2003) Drilling fluid yield stress: measurement techniques for improved understanding of critical drilling fluid parameters. Presented at AADE Technical Conference, Houston, 1-3 April. AADE-03-NTCE-35

Quek MC, Chin LN, Yusof YA (2013) Modelling of rheological behavior of sour soup juices concentrates using shear rate-temperature-concentration superposition. J Food Eng 118(4):380–386. https://doi.org/10.1016/j.jfoodeng.2013.04.025 CrossRef

Rajendra R, Pratihar DK (2011) Particle swarm optimization algorithm vs genetic algorithm to develop integrated scheme for obtaining optimal mechanical structure and adaptive controller of a robot. Intell Control Autom 2(04):430–449. https://doi.org/10.4236/ica.2011.24050 CrossRef

Rao AM (1999) Rheology of fluid and semisolid fluids: principles and applications. Aspen Publication, Maryland

Rao MA (2014) Rheology of fluid, semisolid and solid foods, Food Engineering Series. Springer US, New York. https://doi.org/10.1007/978-1-4614-9230-6 CrossRef

Renders JM, Flasse SP (1996) Hybrid methods using genetic algorithms for global optimization. IEEE Trans Syst Man Cybern Part B Cybern 26:243–258CrossRef

Robertson RE, Stiff HA (1976) An improved mathematical model for relating shear stress to shear rate in drilling fluids and cement slurries. SPE J 16(01):31–36. https://doi.org/10.2118/5333-PA CrossRef

Rooki R, Ardejani FD, Moradzadeh A, Mirzaei H, Kelessidis V, Maglione R, Norouzi M (2012) Optimal determination of rheological parameters for herschel–bulkley drilling fluids using genetic algorithms (GAs). Korea-Aust Rheol J 24(3):163–170. https://doi.org/10.1007/s13367-012-0020-3 CrossRef

Samuel M, Card RJ, Nelson EB, Brown JE, Vinod PS, Temple HL, Qu Q, Fu DK (1997) Polymer-free fluid for hydraulic fracturing. Presented at SPE Annual Technical Conference and Exhibition, 5-8 October,1997 San Antonio, Texas, SPE-38622-MS. https://doi.org/10.2118/38622-MS

Santos PH, Meller da Silva LH, Manoel da Cruz Rodrigues A, Ribeiro de Souza JA (2016) Influence of temperature, concentration and shear rate on the rheological behavior of malay apple (Syzygium malaccense) juice. Braz. J Food Technol 19:e2015009

Saravanan M, Slochanal SMR, Venkatesh P, Abraham JPS (2007) Application of particle swarm optimization technique for optimal location of FACTS devices considering cost of installation and system loadability. Electr Pow Syst Res 77:276–283

Schaffer JD, Caruana RA, Eshelman LJ, Das R (1989) A study of control parameters affecting online performance of genetic algorithms for function optimization. Proceedings of the 3rd International Conference on Genetic Algorithms, George Mason University, Fairfax, Virginia, USA, June 1989, 51–60

Scott-Blair GW (1943) A survey of general and applied rheology. Pitman, London

Sekiguchi Y, Sawatari C, Kondo T (2003) A gelation mechanism depending on hydrogen bond formation in regioselectively substituted O-methylcellu loses. Carbohydr Polym 53(1):145–153CrossRef

Shah SN, Lord DL, Tan HC (1992) Recent advances in the fluid mechanics and rheology of fracturing fluids. Presented at International Meeting on Petroleum Engineering, 24-27 March 1992, Beijing, China SPE-22391-MS. https://doi.org/10.2118/22391-MS

Shi Y, Eberhart RC (1998) Parameter selection in particle swarm optimization. In: Porto VW, Saravanan N, Waagen D, Eiben AE (eds) Evolutionary Programming VII. EP 1998. Lecture Notes in Computer Science, vol 1447. Springer, Berlin, pp 591–600. https://doi.org/10.1007/BFb0040810

Silva DA, Brito ACF, De Paula RCM, Feitosa JPA, Paula HC (2003) Effect of mono and divalent salts on gelation of native, Na and deacetylated Sterculia striata and Sterculia urens polysaccharide gels. Carbohydr Polym 54:229–236CrossRef

Silva FC, Guimarães DHP, Gasparetto CA (2005) Reologia do suco de acerola: efeitos da concentração e temperatura. Cienc Tecnol Aliment 25(1):121–126. https://doi.org/10.1590/S0101-20612005000100020 CrossRef

Silva SMC, Pinto FV, Antunes FE, Miguel MG, Sousa JJS, Pais AACC (2008) Aggregation and gelation in hydroxylpropylmethyl cellulose aqueous solutions. J Colloid Interface Sci 327(2):333–340. https://doi.org/10.1016/j.jcis.2008.08.056 CrossRef

Silvaa LE, Santosa CAC, Ribeirob JES, Souzab CC, Sant’Ana AMS (2015) Rheological analysis of vegetable oils used for biodiesel production in brazil. Engenharia Termica (Thermal Engineering) 14:31–36

Srinivas M, Patnaik LM (1994) Genetic algorithms: a survey. IEEE transactions of. Signal Process 42:927–935

Steffe JF (1996) Rheological methods in food process engineering, 2nd edn. Freeman Press, Michigan

Stephen AM, Churms SC (2006) Food polysaccharides and their applications, 2nd edn. Taylor and Francis Group, London. https://doi.org/10.1201/9781420015164 CrossRef

Sun A, Gunasekaran S (2009) Yield stress in foods: measurements and applications. Int J Food Prop 12:70–101CrossRef

Tarrega A, Duran L, Costell E (2004) Flow behaviour of semi-solid dairy desserts. Effect of temperature. Int Dairy J 14(4):345–353. https://doi.org/10.1016/j.idairyj.2003.12.004 CrossRef

Tian Z, Duan L, Wu L, Shen L, Li G (2016) Rheological properties of glutaraldehyde-crosslinked collagen solutions analyzed quantitatively using mechanical models. Mater Sci Eng C 63:10–17. https://doi.org/10.1016/j.msec.2016.02.047 CrossRef

Toneli JTCL, Park KJ, Ramalho JRP, Murr FEX, Fabbro IMD (2008) Rheological characterization of chicory root (Cichoriumintybus L.) inulin solution. Braz J Chem Eng 25(3):461–471. https://doi.org/10.1590/S0104-66322008000300004 CrossRef

Velez-Langs O (2005) Genetic algorithms in oil industry: an overview. J Pet Sci Eng 47(1-2):15–22. https://doi.org/10.1016/j.petrol.2004.11.006 CrossRef

Walls HI, Caines SB, Sanchez AM, Khan SA (2003) Yield stress and wall slip phenomena in colloidal silica gels. J Rheol 47(4):847–868. https://doi.org/10.1122/1.1574023 CrossRef

Wang H, Echeverría-Ciaurri D, Durlofsky LJ (2012) Optimal well placement underuncertainty using a retrospective optimization framework. SPE J 17(01):112–121. https://doi.org/10.2118/141950-PA CrossRef

Wustenber T (2014) Cellulose and cellulose derivatives in the food industry: fundamentals and applications, 1st edn. Wiley-VCH, Weinheim

Zamora M, Power D (2002) Making a case for AADE Hydraulics and the Unified Rheological Model. Presented at AADE Technical Conference, Houston, 2-3 April, AADE-02-DFWM-HO-13

Zhang L, Tang Y, Huaa C, Guan X (2015) A new particle swarm optimization algorithm with adaptive inertia weight based on Bayesian techniques. Appl Soft Comput 28:138–149. https://doi.org/10.1016/j.asoc.2014.11.018 CrossRef

Titel: Rheological studies and optimization of Herschel-Bulkley flow parameters of viscous karaya polymer suspensions using GA and PSO algorithms
verfasst von: Geetanjali Chauhan
Amit Verma
Akashdeep Das
Keka Ojha
Publikationsdatum: 07.12.2017
Verlag: Springer Berlin Heidelberg
Erschienen in: Rheologica Acta / Ausgabe 3/2018
Print ISSN: 0035-4511
Elektronische ISSN: 1435-1528
DOI: https://doi.org/10.1007/s00397-017-1060-x

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2018

Linear viscoelastic analysis using frequency-domain algorithm on oscillating circular shear flows for bubble suspensions

Correction to: Rheological studies and optimization of Herschel-Bulkley flow parameters of viscous karaya polymer suspensions using GA and PSO algorithms

Newtonian, power law, and infinite shear flow characteristics of concentrated slurries using percolation theory concepts

Nonlinear viscoelasticity of fat crystal networks

Simultaneous slit rheometry and in situ neutron scattering

On the oscillating shear rheometry of magnetorheological elastomers

Premium Partner

Marktübersichten