nach oben

Rock Mechanics and Rock Engineering

Erschienen in:

04.03.2019 | Original Paper

Cracking Evolution and Failure Characteristics of Longmaxi Shale Under Uniaxial Compression Using Real-Time Computed Tomography Scanning

verfasst von: Yongting Duan, Xiao Li, Bo Zheng, Jianming He, Jin Hao

Erschienen in: Rock Mechanics and Rock Engineering | Ausgabe 9/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

To determine the cracking and failure characteristics of Longmaxi shale in deformation and failure under loading, cylindrical specimens were prepared to conduct a series of uniaxial compression tests. Real-time computed tomography (CT) at different stress levels were used to obtain reconstructed stereograms, and horizontal CT images and vertical slices were obtained for analysis. Based on the CT images and slices, the cracking evolution of Longmaxi shale in the horizontal and vertical direction was determined qualitatively, the quantitative distributions of crack area during the loading were revealed and the variation in crack volume at different stress levels was first obtained. Based on the grey histogram of the reconstructed three-dimensional volume, the initial mineral distribution, internal pore evolution and final crack morphologies and volumes were established and their inter-relationship was discussed. These qualitative and quantitative results are necessary to characterize and understand the cracking evolution and failure characteristics of the Longmaxi shale.

Vorheriger Artikel Probabilistic Characterization of Rock Mass from Limited Laboratory Tests and Field Data: Associated Reliability Analysis and Its Interpretation

Nächster Artikel The Microwave-Induced Fracturing of Hard Rock

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Chen WX, He XQ, Liu MJ, Hani M, Wang Q (2015) Meso- and macro-behaviour of coal rock: observations and constitutive model development. Int J Min Reclam Environ 11(2):1–12

Duan YT, Li X, He JM, Li SD, Zhou RQ (2018) Quantitative analysis of meso-damage evolution for shale under in situ uniaxial compression conditions. Environ Earth Sci 77(4):154CrossRef

Guo XS, Li YP, Liu RB, Wang QB (2014) Characteristics and controlling factors of micropore structures of the Longmaxi shale in the Jiaoshiba area, Sichuan basin. Nat Gas Ind 1(2):165–171CrossRef

Heng S, Yang CH, Zeng YJ, Guo YT, Wang L, Hou ZK (2014) Experimental study on hydraulic fracture geometry of shale. Chin J Geotechn Eng 36(7):1243–1251

Ju Y, Xie HP, Zheng ZM, Lu JB, Mao LT, Gao F, Peng RD (2014) Visualization of the complex structure and stress field inside rock by means of 3D printing technology. Sci Bull 59(36):5354–5365CrossRef

Ju Y, Wang L, Xie HP, Ma GW, Zheng ZM, Mao LT (2017) Visualization and transparentization of the structure and stress field of aggregated geomaterials through 3D printing and photoelastic techniques. Rock Mech Rock Eng 50(6):1383–1407CrossRef

Ju Y, Ren ZY, Mao LT, Chiang FP (2018) Quantitative visualisation of the continuous whole-field stress evolution in complex pore structures using photoelastic testing and 3D printing methods. Opt Express 26(5):6182CrossRef

Li X, Duan YT, Li SD, Zhou RQ (2017) Study on the progressive failure characteristics of longmaxi shale under uniaxial compression conditions by X-ray micro-computed tomography. Energies 10:303–315CrossRef

Ma XF, Li N, Yin CB, Li YC, Zou YS, Wu S et al (2017) Hydraulic fracture propagation geometry and acoustic emission interpretation: a case study of Silurian Longmaxi formation shale in Sichuan Basin, SW China. Petrol Explor Dev 44(6):1030–1037CrossRef

Shao XH, Pang XQ, Li QW, Wang PW, Chen D, Shen WB, Zhao ZF (2017) Pore structure and fractal characteristics of organic-rich shales: a case study of the lower Lilurian Longmaxi shales in the Sichuan Basin, SW China. Mar Petrol Geol 80:192–202CrossRef

Wang Y, Li CH (2017) Investigation of the P- and S-wave velocity anisotropy of a Longmaxi formation shale by real-time ultrasonic and mechanical experiments under uniaxial deformation. J Petrol Sci Eng 158:253–267CrossRef

Wang Y, Wang LH, Wang JQ, Jiang Z, Jin C, Wang YF (2017) Investigating microstructure of Longmaxi shale in Shizhu area, Sichuan basin, by optical microscopy, scanning electron microscopy and micro-computed tomography. Nucl Sci Tech 28(11):163CrossRef

Wang Y, Li CH, Hao J, Zhou RQ (2018) X-ray micro-tomography for investigation of meso-structural changes and crack evolution in Longmaxi formation shale during compressive deformation. J Petrol Sci Eng 164:278–288CrossRef

Wu J, Liang F, Bai WH, Lin W, Zhao R (2015) Exploration prospect of lower Silurian Longmaxi formation shale gas in northeastern Chongqing City. Spec Oil Gas Reserv 22(6):50–55

Wu YM, Lan HX, Gao X, Wang W, Chen JH, Hao ZB (2016a) The relationship between the volume density of cracks and acoustic properties of the shale core samples from Fulin. Chin J Geophys 59(10):3891–3900

Wu YS, Li X, He JM, Zheng B (2016b) Mechanical properties of Longmaxi Black organic-rich shale samples from South China under uniaxial and triaxial compression states. Energies 9(12):1088CrossRef

Xu F, Yang CH, Guo YT, Wang L, Hou ZK, Li HR et al (2017) Effect of bedding planes on wave velocity and AE characteristics of the Longmaxi shale in China. Arab J Geosci 10(6):141CrossRef

Yan CL, Gen DJ, Hu LB, Chen ZJ, Yan XJ, Lin H, Tan Q, Hua YB (2015) Brittle failure of shale under uniaxial compression. Arab J Geosci 8(5):2467–2475CrossRef

Yang R, He S, Yi JZ, Hu QH (2016) Nano-scale pore structure and fractal dimension of organic-rich Wufeng-Longmaxi shale from Jiaoshiba area, Sichuan basin: investigations using FE-SEM, gas adsorption and helium pycnometry. Mar Petrol Geol 70:27–45CrossRef

Yang R, Hao F, He S, He CC, Guo XS, Yi JZ et al (2017) Experimental investigations on the geometry and connectivity of pore space in organic-rich Wufeng and Longmaxi shales. Mar Petrol Geol 84:225–242CrossRef

Yang BC, Xue L, Wang MM (2018a) An evaluation index for the fracturing effect in shale based on laboratory testing. Environ Earth Sci 77(6):240CrossRef

Yang BC, Xue L, Zhang K (2018b) X-ray micro-computed tomography study of the propagation of cracks in shale during uniaxial compression. Environ Earth Sci 77(18):652CrossRef

Yao GH, Chen Q, Liu H, Tan YH, Wang LS, Du HY, Zhu HL (2015) Experiment study on mechanical properties of bedding shale in lower Silurian Longmaxi shale Southeast Chongqing. Chin J Rock Mech Eng 34(s1):3313–3319

Zhang XW, Lu YY, Tang JR, Zhou Z, Liao Y (2017) Experimental study on fracture initiation and propagation in shale using supercritical carbon dioxide fracturing. Fuel 190:370–378CrossRef

Zhao Q, Tisato N, Grasselli G (2016) 4D observation of the formation of rock fractures during rotary shear. In: GeoConvention. Calgary, Canada, 7–11 March 2016

Zhao Q, Abdelaziz A, He TM, Xia KW, Grasselli G (2017) Understanding progressive rock failure using ultrasonic tomography and numerical simulation. In: ISRM progressive rock failure conference. International Society for Rock Mechanics and Rock Engineering, Ascona, Switzerland

Zhong JH, Liu SX, Ma YS, Yin CM, Liu CL, Li ZX, Liu X, Li Y (2015) Macro-fracture mode and micro-fracture mechanism of shale. Petrol Explor Dev 42(2):269–276CrossRef

Zhu JB, Zhou T, Liao ZY, Sun L, Li XB, Chen R (2018) Replication of internal defects and investigation of mechanical and fracture behaviour of rock using 3D printing and 3D numerical methods in combination with X-ray computerized tomography. Int J Rock Mech Min 106:198–212CrossRef

Titel: Cracking Evolution and Failure Characteristics of Longmaxi Shale Under Uniaxial Compression Using Real-Time Computed Tomography Scanning
verfasst von: Yongting Duan
Xiao Li
Bo Zheng
Jianming He
Jin Hao
Publikationsdatum: 04.03.2019
Verlag: Springer Vienna
Erschienen in: Rock Mechanics and Rock Engineering / Ausgabe 9/2019
Print ISSN: 0723-2632
Elektronische ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-019-01765-0

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2019

Method to Address Brittle Rock Strength Scatter Through Fracture Density

Range Versus Surface Denoising of Terrestrial Laser Scanning Data for Rock Discontinuity Roughness Estimation

Study on Crack Evolution Mechanism of Roadside Backfill Body in Gob-Side Entry Retaining Based on UDEC Trigon Model

Volumetric Deformation, Ultrasonic Velocities and Effective Stress Coefficients of St Peter Sandstone During Poroelastic Stress Changes

Analysis of a Complex Flexural Toppling Failure of Large Underground Caverns in Layered Rock Masses

Rock Cutting Experiments with an Actuated Disc