nach oben

Metal Science and Heat Treatment

Erschienen in:

18.04.2019

Microstructure and Mechanical Properties of Dissimilar Al – Cu Joints Formed by Friction Stir Welding

verfasst von: E. N. Ryl’kov, F. Yu. Isupov, A. A. Naumov, O. V. Panchenko, A. I. Shamshurin

Erschienen in: Metal Science and Heat Treatment | Ausgabe 11-12/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Friction-stir-welded joints of commercial-purity copper and aluminum alloy AMg5 are studied. The effect of the process parameters on the microstructure and mechanical properties of the joints is analyzed. The results of temperature measurements during the welding made with the help of thermocouples are presented. A mathematical model is suggested for computing the temperature field of a weld. The computed and experimental data are compared.

Vorheriger Artikel Effect of Heat Treatment on the Structure and Phase Composition of a High-Temperature Nickel Alloy Obtained by Laser Cladding

Nächster Artikel A Study of Structural Features of a Gradient Material from a Heat-Resistant Nickel Alloy Produced by Laser Cladding

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

C. Dawes and W. Thomas, TWI Bull. (1995), 124 p.

T. Debroy and H. K. D. H. Bhadeshia, “Friction stir welding of dissimilar alloys — a perspective,” Sci. Technol. Weld. Join., 15(4), 266 – 270 (2010).CrossRef

A. I. Rudskoy, A. A. Naumov, and E. V. Chernikov, “Friction stir processing of metals is a new method of intensive plastic deformation,” Tsvetn. Met., No. 4, 36 – 40 (2014).

I. I. Musabirov, I. M. Safarov, R. M. Galeyev, et al., “Plastic deformation of the Ni – Mn – Ga alloy by multiple isothermal forging,” Mater. Phys. Mech., 33(1), 124 – 136.

A. I. Rudskoy, G. E. Kodzhaspirov, J. Kliber, and C. Apostolopoulos, “Advanced metallic materials and processes,” Mater. Phys. Mech., 25(1), 1 – 8 (2016).

R. A. Parshikov, A. I. Rudskoy, A. M. Zolotov, and O. V. Tolochko, “Analysis of specimen plastic flow features during severe plastic deformation,” Rev. Adv. Mater. Sci., 45(1 – 2), 67 – 75 (2016).

F. Grechnikov and A. Khaimovich, “The study of plastic deformation at high stain rates in upset forging of cylinders,” Key Eng. Mater., 684, 74 – 79 (2016).CrossRef

K. P. Mehta and V. J. Badheka, “Review on dissimilar friction stir welding of copper to aluminum: process, properties, and variants,” Mater. Manuf. Proc., 31, 233 – 254 (2016).CrossRef

S. Yu. Kondrat’ev, Yu. N. Morozova, Yu. A. Golubev, et al., “Microstructure and mechanical properties of welds of Al –Mg – Si alloys after different modes of impulse friction stir welding,” Metal Sci. Heat Treat., 59(11 – 12), 679 – 702 (2018).

10.

A. A. Naumov, F. Yu. Isupov, O. V. Panchenko, and E. N. Rylkov, “Dissimilar welding of Cu and Al alloys by friction stir welding and impulse friction stir welding,” Proc. 28th Int. Ocean and Polar Eng. Conf., pp. 166 – 171 (2018).

11.

A. Loureiro, D. Verdera, D. Gesto, and D. M. Rodriguez, “Influence of tool offsetting on the structure and morphology of dissimilar aluminum to copper friction-stir welds,” Metal. Mater. Trans. A, 43A, 5096 – 5105 (2012).

12.

A. Regensburg, R. Schurer, M. Weigl, and J. P. Bergmann, “Influence of pin length and electrochemical platings on the mechanical strength and macroscopic defect formation in stationary shoulder friction stir welding of aluminum to copper,” Metals, 8(85), 1 – 9 (2018).

13.

I. Golubev, A. Naumov, and V. Michailov, “Developing finite element model of the friction stir welding for temperature calculation,” in: METAL 2014, Proc. 23rd Int. Conf. on Metallurgy and Materials (2014), pp. 1242 – 1248.

14.

I. A. Golubev, A. A. Naumov, E. V. Chernikov, et al., “Research of temperature distribution during friction stir welding of 2 mm AW 6082 sheets,” in: METAL 2015, Proc. 24th Int. Conf. on Metallurgy and Materials (2015), pp. 1433 – 1439.

15.

I. A. Golubev, A. A. Naumov, E. V. Chernikov, et al., “Temperature distribution and welding distortion measurements after FSW of Al 6082-T6 sheets,” Friction Stir Weld. Proc., VIII, 289 – 295 (2016).

16.

I. A. Golubev, I. N. Morozova, A. A. Naumov, et al., “Numerical simulation and experimental investigation of impulse friction stir welding of 6082-T6 aluminum alloy,” in: Mater. Sci. Technol. Conf. Exhibition 2017, MS and T (2017), Vol. 2, pp. 987 – 994.

Titel: Microstructure and Mechanical Properties of Dissimilar Al – Cu Joints Formed by Friction Stir Welding
verfasst von: E. N. Ryl’kov
F. Yu. Isupov
A. A. Naumov
O. V. Panchenko
A. I. Shamshurin
Publikationsdatum: 18.04.2019
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 11-12/2019
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-019-00348-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11-12/2019

Metal Science and Heat Treatment Volume 60, Number 11

A Study of Modes of Hardening Heat Treatment of Titanium Alloy VT23

Special Features of Structure Formation in Deposited Metal Based on Alloyed Nickel Aluminide and its High-Temperature Properties

Tailoring the Properties in Functionally Graded Alloy Inconel 718 Using Additive Technologies

Effect of the Temperature of Friction Stir Welding on the Microstructure and Mechanical Properties of Welded Joints of an Al – Cu – Mg Alloy

Investigation of the Structure and Properties of Steel 30KhGSA after Volume Laser-Beam Treatment

Premium Partner

Marktübersichten