nach oben

Tribology Letters

Erschienen in:

01.02.2009 | Original Paper

A Novel Method for Quantitative Determination of Ultra-low Wear Rates of Materials, Part I: On Steels

verfasst von: Y.-R. Li, D. Shakhvorostov, G. Pereira, A. Lachenwitzer, W. N. Lennard, P. R. Norton

Erschienen in: Tribology Letters | Ausgabe 2/2009

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

A novel method for the quantitative determination of the wear of materials at very low wear rates is introduced here. The main concept involves implanting gold as a trace marker into the tested materials, and measuring the gold concentration and depth profile before and after the wear tests by Rutherford backscattering (RBS). The amount of gold loss is related to the material loss under the tested conditions. The background concentration of gold in AISI 1095 and 52100 steels has been determined by neutron activation analysis (NAA; ~3 and 33 wt. ppb, respectively). Several fluences (1 × 10¹⁵–1 × 10¹⁶ atoms/cm²) of gold were implanted into AISI 52100 steel samples in order to evaluate the changes in the mechanical and tribological properties induced by implantation. The new method shows the relative effectiveness for wear prevention of the different tested lubricants with and without antiwear additives. Even the thickness of the antiwear film and the amount of zinc (from zinc dialkyldithiophosphates used as antiwear additives) can be measured by this method.

Vorheriger Artikel The Role of Configuration Entropy in Boundary Lubricants Based on the n-Perfluoropropylene Oxide Main Chain Structure

Nächster Artikel Correlation Between Tribological Parameters and Wear Mechanisms of Homogeneous and Heterogeneous Material

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Williams, J.A.: Wear and surface damage. Engineering tribology. Oxford University Press Inc., New York (1994)

Ayel, J.: Chapter 7: Engine wear. In: Schilling, A. (ed.) Automobile engine lubrication. Scientific Publications, Shropshire, England (1972)

Plint, M., Martyr, A.: Engine testing—theory and practice. Butterworth Heinemann, Oxford (1999)

Scherge, M., Shakhvorostov, D., Pohlmann, K.: Fundamental wear mechanisms of metals. Wear 255, 395–400 (2003)CrossRef

Scherge, M., Martin, J.M., Pohlmann, K.: Characterization of wear debris of systems operated under low wear-rate conditions. Wear 260, 458–461 (2006). doi:10.1016/j.wear.2005.03.025 CrossRef

Chen, M., Perry, T., Alpas, A.T.: Ultra-mild wear in eutectic Al–Si alloys. Wear 263(1–6), 552–561 (2007)CrossRef

Kaspar-Sickermann, W.: Kolbenringverschleibversuche mit radioaktiven Isotopen. Kerntechnik 3(73–84), 301–305 (1961)

Kollmann, K., Stegemann, D.: Anwendung radioaktiver isotope fur Forschungsaufgaben des Maschinenbaus. Kerntechnik 4(2), 41–46 (1962)

Kollmann, K., Sitzler, H.: Zweikomponenten-Verschleißmessung mittels radioaktiver isotope an Kolbenringen und Gleitlagern von Verbrennungsmotoren. MTZ 24(2), 197–202 (1966)

10.

Wall, C.M., Eberle, D.C., Treuhaft, M.B., Arps, J.H.: Technique for high-sensitivity in vitro wear measurement of UHMWPE hip joint liners using radioactive tracer technology. Wear 259(7–12), 964–971 (2005)CrossRef

11.

Eberle, D.C., Wall, C.M., Treuhaft, M.B.: Applications of radioactive tracer technology in the real-time measurement of wear and corrosion. Wear 259(7–12), 1462–1471 (2005)CrossRef

12.

Scherge, M., Pohlmann, K., Gerve, A.: Wear measurement using radionuclide-technique (RNT). Wear 254(9), 801–817 (2003). doi:10.1016/S0043-1648(03)00230-8 CrossRef

13.

Gervé, A.: Moderne Möglichkeiten der Verschleißmessung mit radioaktiven Isotopen. Zeitschrift für Werkstofftechnik 3(2), 81–86 (1972)

14.

Conlon, T.W., Armitage, B.H.: The application of energetic ion beams in the study of wear and porosity. Wear 34(3), 409–418 (1975). doi:10.1016/0043-1648(75)90107-6 CrossRef

15.

Delmas, R., Mariet, C., Moskura, M., Guiot, D.: Instrumental neutron activation analysis. http://iramis.cea.fr/en/Phocea/Vie_des_labos/Ast/ast_sstechnique.php?id_ast=885 (2008). Accessed 16 Dec 2008

16.

Ziegler, J.F.: SRIM—2003 (The Stopping and Range of Ions in Matter). http://www.srim.org/SRIM/SRIM2003.htm (2008). Accessed 16 Dec 2008

17.

Oliver, W.C., Pharr, G.M.: An improved technique determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7(6), 1564–1583 (1992). doi:10.1557/JMR.1992.1564 CrossRefADS

18.

Rigney, D.A.: Transfer, mixing and associated chemical and mechanical processes during the sliding of ductile materials. Wear 245, 1–9 (2000). doi:10.1016/S0043-1648(00)00460-9 CrossRef

19.

Shakhvorostov, D., Gleising, B., Büscher, R., Dudzinski, W., Fischer, A., Scherge, M.: Microstructure of tribologically induced nanolayers produced at ultra-low wear rates. Wear 263, 1259–1265 (2007). doi:10.1016/j.wear.2007.01.127 CrossRef

20.

Shakhvorostov, D., Li, J., Nold, E., Beuchle, G., Scherge, M.: Influence of Cu grain size on running-in related phenomena. Tribol. Lett. 28(3), 307–318 (2007). doi:10.1007/s11249-007-9274-1 CrossRef

21.

Budzynski, P., Youssef, A.A., Kamienska, B.: Influence of nitrogen and titanium implantation on the tribological properties of steel. Vacuum 70(2–3), 417–421 (2003). doi:10.1016/S0042-207X(02)00680-2 CrossRef

22.

Jianhua, Y., Tonghe, Z.: Tribological properties changes of H13 steel induced by MEVVA Ta ion implantation. Appl. Surf. Sci. 229(1–4), 249–253 (2004). doi:10.1016/j.apsusc.2004.01.069 CrossRefADS

23.

Blau, P.J.: Friction and wear transitions of materials: break-in, run-in, wear-in. Noyes Publications, Park Ridge, N.J (1989)

24.

Shakhvorostov, D., Jian, L., Nold, E., Beuchle, G., Scherge, M.: Influence of Cu grain size on running-in related phenomena. Tribol. Lett. 28, 307–318 (2007). doi:10.1007/s11249-007-9274-1 CrossRef

25.

Fuller, M.L., Fernandez, L.R., Massoumi, G.R., Lennard, W.N., Kasrai, M., Bancroft, G.M.: The use of X-ray absorption spectroscopy for monitoring the thickness of antiwear films from ZDDP. Tribol. Lett. 8, 187–192 (2000). doi:10.1023/A:1019195404055 CrossRef

26.

Li, Y.-R., Pereira, G., Kasrai, M., Norton, P.R.: Studies on ZDDP anti-wear films formed under different conditions by XANES spectroscopy, atomic force microscopy and 31P NMR. Tribol. Lett. 28(3), 319–328 (2007). doi:10.1007/s11249-007-9275-0 CrossRef

Titel: A Novel Method for Quantitative Determination of Ultra-low Wear Rates of Materials, Part I: On Steels
verfasst von: Y.-R. Li
D. Shakhvorostov
G. Pereira
A. Lachenwitzer
W. N. Lennard
P. R. Norton
Publikationsdatum: 01.02.2009
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 2/2009
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-008-9401-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2009

Rolling–Sliding Laboratory Tests of Friction Modifiers in Leaf Contaminated Wheel–Rail Contacts

An Experimental Validation of the Recently Discovered Scale Effect in Generalized Newtonian EHL

Correlation Between Tribological Parameters and Wear Mechanisms of Homogeneous and Heterogeneous Material

End-grafted Sugar Chains as Aqueous Lubricant Additives: Synthesis and Macrotribological Tests of Poly(l-lysine)-graft-Dextran (PLL-g-dex) Copolymers

Ionic Liquids as Lubricants of Titanium–Steel Contact

The Role of Configuration Entropy in Boundary Lubricants Based on the n-Perfluoropropylene Oxide Main Chain Structure

Premium Partner

Marktübersichten