nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.11.2012

Effect of Heat Input on Mechanical and Metallurgical Properties of Friction Stir Welded AA6061-10% SiCp MMCs

verfasst von: P. Periyasamy, B. Mohan, V. Balasubramanian

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2012

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Metal matrix composites (MMCs) reinforced with SiC particles combine the matrix properties with those of the ceramic reinforcement, leading to higher stiffness and superior thermal stability with respect to the corresponding unreinforced alloys. However, their wide application as structural material needs proper development of a suitable joining process. In this investigation, an attempt was made to study the effect of heat input on the evolution of microstructure in weld region of friction stir welded AA6061-10% SiCp MMCs. The tensile properties of the joints were evaluated and they are related with microstructure and heat input of the process. The microstructure characterization of the weld zone shows evidence of a substantial grain refinement of the aluminum matrix and fracturing of reinforcement particles due to dynamic recrystallization induced by the plastic deformation and frictional heating during welding.

Vorheriger Artikel Thermal Behavior of Mechanically Alloyed Powders Used for Producing an Fe-Mn-Si-Cr-Ni Shape Memory Alloy

Nächster Artikel The role of Metal-Matrix Composite development During Friction Stir Welding of Aluminum to Brass in Weld Characteristics

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

M.A. Kothari, M.S. Thesis, Texas A&M University, 2005, p 1–75

X. Yong Gan, D. Solomon, and M. Reinbolt, Friction Stir Processing of Particle Reinforced Composite Materials, Materials, 2010, 3(1), p 329–350. doi:10.3390/ma3010329 CrossRef

C.J. Dawes and W.M. Thomas, Friction Stir Process Welds Aluminum Alloys, Weld. J., 1996, 75, p 41–45

J.M. Torralba, C.E. DaCosta, and F. Velasco, P/M Aluminum Matrix Composites: An Overview, J. Mater. Process. Technol., 2003, 5, p 203–208CrossRef

M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, and W.H. Bimgel, Properties of friction-stir-welded 7075 T651 aluminium, Metall. Mater. Trans. A, 1998, 29A, p 1955–1964CrossRef

E.D. Nicholas and S.W. Kallee, Causing a Stir in the Future, Weld. Join., 1998, 18, p 18–21

E.D. Nicholas, Friction Stir Welding—A Decade On, IIW Asian Pacific International Congress, Sydney, Australia, 29 Oct–2 Nov, 2000

L.E. Murr, G. Liu, and J.C. McClure, A TEM Study of Precipitation and Related Microstructures in Friction-Stir Welded 6061 Aluminum, J. Mater. Sci., 1998, 33, p 1243–1251CrossRef

O.V. Flores, C. Kennedy, L.E. Murr, D. Brown, S. Pappu, B.M. Nowak, and J.C. McClure, Microstructural Issues in a Friction-Stir-Welded Aluminum Alloy, Scripta Mater., 1998, 38, p 703–708CrossRef

10.

T. Hashimoto, S. Jyogan, K. Nakata, Y.G. Kim, and M. Ushio, Flaws in Friction Stir Welds, Proceedings of the First International Symposium on FSW, 14–16 June, 1999, Rockwell Science Center, Thousand Oaks, CA, USA

11.

C.G. Andersson, R.E. Andrews, B.J.I. Dance, M.J. Russel, E.J. Olden, and R.M. Sanderson, Friction Stir Welding of Oxygen Free Cu 60%, 40% Zn and Cu Alloy, Proceedings of the Second FSW Symposium on Comparison of Copper Canister Fabrication by the Electron Beam and FSP, June 26–28, 2000, Gothenburg, Sweden

12.

S.G. Lim, S.S. Kim, C.G. Lee, and S.J. Ki, Tensile Behavior of Friction-Stir-Welded Al 6061-T651, Metall. Mater. Trans. A, 2004, 35, p 2829–2837CrossRef

13.

M.L. Santeela, T. Engstrom, D. Storjohann, and T.Y. Pan, Friction Stir Welding of Al MMCs, Scripta Mater., 2005, 53, p 201–209CrossRef

14.

M.P. Miles, B.J. Decker, and T.W. Nelson, Formability and Strength of Friction-Stir-Welded Aluminum Sheets, Metall. Mater. Trans. A, 2004, 35, p 3461–3468CrossRef

15.

M.J. Jones, L.P. Heurtier, C. Desrayaud, F. Montheillet, D. Allehaux, and J.H. Driver, Correlation Between Microstructure and Microhardness in a Friction Stir Welded 2024 Aluminium Alloy, Scripta Mater., 2005, 52(8), p 693–697CrossRef

16.

W.M. Thomas, Friction Stir Butt Welding, International Patent Application no. PCT/GB92/02203 and GB Patent Application no. 9125978.8, US Patent no. 5460, 317, Dec 1991

17.

C. Dawes and W. Thomas, TWI, GB Patent Application no. 9125978.8, US Patent no. 5468, 344, Dec 1991

18.

M. Ellis and M. Strangwood, Properties of Friction Stir Welded 7075 T651 Aluminium, TWI Bulletin, 1995, 6, p 138–148

19.

Y.G. Kim, H. Fujii, T. Tsumura, T. Komazaki, and K. Nakata, Effect of Welding Parameters on Microstructure in the Stir Zone of FSW Joints of Al Die Casting Alloy, Mater. Lett., 2006, 60, p 3830–3837CrossRef

20.

H. Uzun, Friction Stir Welding of SiCp Reinforced AA2124 Al Alloy Matrix Composite, Mater. Des., 2007, 28, p 1440–1446CrossRef

21.

M. Amirizad, Evaluation of Microstructure and Mechanical Properties in Friction Stir Welded A356 + 15%SiCp Cast Composite, Mater. Lett., 2006, 60, p 565–568CrossRef

22.

M.A. Kothari, “Welding of Cast A359/SiC/10p MMCs,” Master’s Thesis, Texas A&M University, 1988.

23.

L. Ceschini, I. Boromei, G. Minak, A. Morri, and F. Tarterini, Microstructure, Tensile and Fatigue Properties of AA6061/20vol.%Al₂O₃p Friction Stir Welded Joints, Compos. Part A, 2007, 38, p 1200–1210CrossRef

24.

S. Malarvizhi, K. Raghukantan, and N. Viswanathan, Effect of Post Weld Aging Treatment on Tensile Properties of Electron Beam Welded AA2219 Aluminium Alloy, Int. J. Adv. Manuf. Technol., 2008, 37, p 294–301CrossRef

25.

S. Rajakumar, C. Muralidharan, and V. Balasubramanian, Influence of FSW Process Parameters on Strength Properties of AA7075-T6 Al Alloy Joints, Mater. Des., 2011, 32, p 535–549CrossRef

26.

S. Malarvizhi and V. Balasubramanian, Effect of Welding Processes on AA2219 Aluminium Alloy Joint Properties, Trans. Non-ferrous Met. Soc. China, 2011, 21, p 88–95

27.

P. Cavaliere, A. Squillace, and F. Panella, Effect of Welding Parameters on Mechanical and Microstructural Properties of AA6082 Joints Produced by Friction Stir Welding, J. Mater. Technol., 2008, 28, p 364–372CrossRef

28.

P. Heurtier, Mechanical and Thermal Modeling of FSW, J. Mater. Process. Technol., 2006, 171, p 348–357CrossRef

Titel: Effect of Heat Input on Mechanical and Metallurgical Properties of Friction Stir Welded AA6061-10% SiCp MMCs
verfasst von: P. Periyasamy
B. Mohan
V. Balasubramanian
Publikationsdatum: 01.11.2012
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2012
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-012-0176-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2012

In Situ Synthesis, Microstructure, and Properties of TiC and (Ti,W)C-Reinforced Fe-Mn-Al Austenitic Steel Matrix Composites

Fatigue-Life Computational Analysis for the Self-Expanding Endovascular Nitinol Stents

Influence of Additional Tensile Force on Springback of Tube Under Rotary Draw Bending

Enhanced Fatigue Crack Propagation Resistance in an Al-Zn-Mg-Cu Alloy by Retrogression and Reaging Treatment

In Situ Production of Fe-TiC Nanocomposite by Mechanical Activation and Heat Treatment of the Fe2O3/TiO2/C Powder

The Quasi-static Deformation, Failure, and Fracture Behavior of Titanium Alloy Gusset Plates Containing Bolt Holes

Premium Partner

Marktübersichten