nach oben

Journal of Materials Engineering and Performance

Erschienen in:

31.08.2016

Microstructure and Tensile Properties of AZ31B Alloy and AZ31B-SiCp Deformed Through a Multi-step Process

verfasst von: M. J. Shen, X. J. Wang, T. Ying, M. F. Zhang, K. Wu

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The 15 vol.% micron SiC particle (SiCp)-reinforced AZ31B magnesium matrix composite (AZ31B-SiCp) prepared with semisolid stirring-assisted ultrasonic vibration was subjected to a multi-step process. The influence of the multi-step processing route on the microstructure and mechanical properties of the AZ31B-SiCp was investigated. For comparison, the monolithic AZ31B alloy was also processed under the same conditions. The results showed that the grain sizes of the AZ31B alloy and the AZ31B-SiCp were gradually decreased with increasing the processing step. Compared with the AZ31B-SiCp, the grain size of the AZ31B alloy was much larger, and the grain size distribution was inhomogeneous at the same processing condition. The particles of the AZ31B-SiCp were dispersed uniformly through the multi-step processing. Moreover, the tensile properties of the materials were gradually improved with increasing the processing step. In particular, the strength of AZ31B-SiCp and the ductility of AZ31B alloy improved significantly based on the room-temperature tensile test results.

Vorheriger Artikel Microstructure and Tensile Properties of Multiple Compressed CuZn Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

C.R. Dandekar and Y.C. Shin, Effect of Porosity on the Interface Behavior of an Al₂O₃-Aluminum Composite: A Molecular Dynamics Study, Compos. Sci. Technol., 2011, 71, p 350–356CrossRef

S.M. Zebarjad and S.A. Sajjadi, Dependency of Physical and Mechanical Properties of Mechanical Alloyed Al-Al₂O₃ Composite on Milling Time, Mater. Des., 2007, 28, p 2113–2120CrossRef

M.J. Shen, X.J. Wang, C.D. Li, M.F. Zhang, X.S. Hu, M.Y. Zheng, and K. Wu, Effect of Bimodal Size SiC Particulates on Microstructure and Mechanical Properties of AZ31B Magnesium Matrix Composites, Mater. Des., 2013, 52, p 1011–1017CrossRef

M. Paramsothy, J. Chan, R. Kwok, and M. Gupta, Addition of CNTs to Enhance Tensile/Compressive Response of Magnesium Alloy ZK60A, Compos. Part A, 2011, 42, p 2093–2100CrossRef

K. Edalati, E. Matsubara, and Z.J. Horita, Processing Pure Ti by High Pressure Torsion in Wide Ranges of Pressures and Strain, Metall. Mater. Trans. A, 2009, 40, p 2079–2086CrossRef

P. Hidalgo-Manrique, C.M. Cepeda-Jiménez, A. Orozco-Caballero, O.A. Ruano, and F. Carreño, Role of Particles on Microstructure and Mechanical Properties of the Severely Processed 7075 Aluminium Alloy, J. Mater. Sci., 2014, 49, p 833–841CrossRef

Y.T. Zhu, H. Jiang, J.Y. Huang, and T.C. Lowe, A New Route to Bulk Nanostructured Metals, Metall. Mater. Trans. A, 2001, 32, p 1559–1562CrossRef

Y.J. Chen, Q.D. Wang, J.B. Lin, L.J. Zhang, and C.Q. Zhai, Fabrication of Bulk UFG Magnesium Alloys by Cyclic Extrusion Compression, J. Mater. Sci., 2007, 42, p 7601–7603CrossRef

K.B. Nie, X.J. Wang, X.S. Hu, Y.W. Wu, K.K. Deng, K. Wu, and M.Y. Zheng, Effect of Multidirectional Forging on Microstructures and Tensile Properties of a Particulate Reinforced Magnesium Matrix Composite, Mater. Sci. Eng., A, 2011, 528, p 7133–7139CrossRef

10.

X.J. Wang, K. Wu, D.L. Peng, and M.Y. Zheng, Processing and Mechanical Properties of SiC Particulate Reinforced AZ91 Composites Fabricated by Stir Casting, Trans. Nonferr. Metal. Soc. China, 2006, 16, p 1840–1844

11.

X.J. Wang, K. Wu, W.X. Huang, H.F. Zhang, M.Y. Zheng, and D.L. Peng, Effect of Hot Extrusion on the Microstructure of a Particulate Reinforced Magnesium Matrix Composite, Mater. Sci. Eng., A, 2007, 465, p 78–84CrossRef

12.

S. Jia, D. Zhang, Y. Xuan, and L. Nastac, An Experimental and Modeling Investigation of Aluminum-Based Alloys and Nanocomposites Processed by Ultrasonic Cavitation Processing, Acoust, App, 2016, doi:10.1016/j.apacoust.2015.07.016

13.

Y.C. Yoo, J.S. Jeon, and H.I. Lee, The Effect of SiC Whiskers on the Hot Deformation Behavior of SiCw/AA2124 Composites, Compos. Sci. Technol., 1997, 57, p 651–654CrossRef

14.

P. Cavaliere and E. Evangelista, Isothermal Forging of Metal Matrix Composites: Recrystallization Behaviour by Means of Deformation Efficiency, Compos. Sci. Technol., 2006, 66, p 357–362CrossRef

15.

16.

M.J. Shen, X.J. Wang, M.F. Zhang, X.S. Hu, M.Y. Zheng, and K. Wu, Fabrication of Bimodal Size SiCp Reinforced AZ31B Magnesium Matrix Composites, Mater. Sci. Eng., A, 2014, 601, p 58–64CrossRef

17.

K.K. Deng, K. Wu, X.J. Wang, Y.W. Wu, X.S. Hu, and M.Y. Zheng, Microstructure Evolution and Mechanical Properties of a Particulate Reinforced Magnesium Matrix Composites Forged at Elevated Temperatures, Mater. Sci. Eng., A, 2010, 527, p 1630–1635CrossRef

18.

T. Hirano, T. Ohji, and K. Niihara, Effect of Matrix Grain Size on the Mechanical Properties of Si₃N₄/SiC Nanocomposites Densified with Y₂O₃, Mater. Lett., 1996, 27, p 53–58CrossRef

19.

S. Hassan and M. Gupta, Development of High Performance Magnesium Nano-composites Using Nano-Al₂O₃ as Reinforcement, Mater. Sci. Eng., A, 2005, 392, p 163–168CrossRef

20.

M.C. Zhao, Y.L. Deng, and X.M. Zhang, Strengthening and Improvement of Ductility Without Loss of Corrosion Performance in a Magnesium Alloy by Homogenizing Annealing, Scripta Mater., 2008, 58, p 560–563CrossRef

21.

S. Sankaranarayanan, R.K. Sabat, S. Jayalakshmi, S. Suwas, and M. Gupta, Effect of Nanoscale Boron Carbide Particle Addition on the Microstructural Evolution and Mechanical Response of Pure Magnesium, Mater. Des., 2014, 56, p 428–436CrossRef

22.

M.C. Zhao, T. Hanamura, H. Qiu, and K. Yang, Low Absorbed Energy Ductile Dimple Fracture in Lower Shelf Region in an Ultrafine Grained Ferrite/Cementite Steel, Metall. Mater. Trans. A, 2006, 37(9), p 2897–2990CrossRef

Titel: Microstructure and Tensile Properties of AZ31B Alloy and AZ31B-SiCp Deformed Through a Multi-step Process
verfasst von: M. J. Shen
X. J. Wang
T. Ying
M. F. Zhang
K. Wu
Publikationsdatum: 31.08.2016
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2277-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2016

Dry Sliding Wear Properties of AZ31-Mg2Si Magnesium Matrix Composites

Dry Sliding Tribological Studies of AA6061-B4C-Gr Hybrid Composites

The Effect of Textured Surfaces with Different Roughness Structures on the Tribological Properties of Al Alloy

Erratum to: Evaluation of the Particle Bonding for Aluminum Sample Produced by Spark Plasma Sintering

Residual Stress Measurement and Calibration for A7N01 Aluminum Alloy Welded Joints by Using Longitudinal Critically Refracted (LCR) Wave Transmission Method

The Effects of Hydroxyapatite Addition on the Properties of the Mechanically Alloyed and Sintered Mg-RE-Zr Alloy

Premium Partner

Marktübersichten