nach oben

Journal of Materials Engineering and Performance

Erschienen in:

27.02.2017

Service Lifetime Estimation of EPDM Rubber Based on Accelerated Aging Tests

verfasst von: Jie Liu, Xiangbo Li, Likun Xu, Tao He

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 4/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Service lifetime of ethylene propylene diene monomer (EPDM) rubber at room temperature (25 °C) was estimated based on accelerated aging tests. The study followed sealing stress loss on compressed cylinder samples by compression stress relaxation methods. The results showed that the cylinder samples of EPDM can quickly reach the physical relaxation equilibrium by using the over-compression method. The non-Arrhenius behavior occurred at the lowest aging temperature. A significant linear relationship was observed between compression set values and normalized stress decay results, and the relationship was not related to the ambient temperature of aging. It was estimated that the sealing stress loss in view of practical application would occur after around 86.8 years at 25 °C. The estimations at 25 °C based on the non-Arrhenius behavior were in agreement with compression set data from storage aging tests in natural environment.

Vorheriger Artikel Microstructure Evolution and Mechanical and Corrosion Behavior of Accumulative Roll Bonded Mg-2%Zn/Al-7075 Multilayered Composite

Nächster Artikel Effect of Sulfide Concentration on Copper Corrosion in Anoxic Chloride-Containing Solutions

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

N. Tomohiro, H. Toshio, Y. Yukihiro, K. Tetsuya, and T. Sekiya, Thermal Degradation of Chlorosulfonated Polyethylene Rubber and Ethylene Propylene Diene Terpolymer, Mater. Des., 2012, 42, p 147–155CrossRef

G.J. Lake, Fatigue and Fracture of Elastomers, Rubber Chem. Technol., 1997, 68, p 435–460CrossRef

K.T. Gillen, M. Celina, R. Bernstein, and M. Shedd, Lifetime Predictions of EPR Materials Using the Wear-Out Approach, Polym. Degrad. Stab., 2006, 91, p 3197–3207CrossRef

S.W. Chang and S.P. Hyun, Useful Lifetime Prediction of Rubber Component, Eng. Fail. Anal., 2011, 18, p 1645–1651CrossRef

K.T. Gillen, R. Bernstein, R.L. Clough, and M. Celina, Lifetime Predictions for Semicrystalline Materials: I. Mechanical Properties and Oxygen Consumption Measurements on EPR Materials, Polym. Degrad. Stab., 2006, 91, p 2146–2156CrossRef

K.T. Gillen, M. Celina, and M.R. Keenan, Methods for Predicting more Confident Lifetimes of Seals in Air Environments, Rubber Chem. Technol., 2000, 73, p 265–283CrossRef

P. Richters, Initiation Process in the Oxidation of Polypropylene, Macromolecules, 1970, 3, p 262–264CrossRef

F. Gugumus, Effect of Temperature on the Lifetime of Stabilized and Unstabilized PP Films, Polym. Degrad. Stab., 1999, 63, p 41–52CrossRef

P. Gijsman, J. Hennekens, and J. Vincent, The Influence of Temperature and Catalyst Residues on the Degradation of Unstabilized Polypropylene, Polym. Degrad. Stab., 1993, 39, p 271–277CrossRef

10.

J. Wise, K.T. Gillen, and R.L. Clough, An Ultrasensitive Technique for Testing the Arrhenius Extrapolation Assumption for Thermallyaged Elastomers, Polym. Degrad. Stab., 1995, 49, p 403–418CrossRef

11.

K.T. Gillen, M. Celina, R.L. Clough, and J. Wise, Extrapolation of Accelerated Aging Data-Arrhenius or Erroneous, Trends Polym. Sci., 1997, 5, p 250–257

12.

K.T. Gillen and M. Celina, The Wear-Out Approach for Predicting the Remaining Lifetime of Materials, Polym. Degrad. Stab., 2001, 71, p 15–30CrossRef

13.

M. Celina, J. Wise, D.K. Ottesen, K.T. Gillen, and R.L. Clough, Oxidation Profiles of Thermally Aged Neoprene, Polym. Degrad. Stab., 2000, 68, p 171–184CrossRef

14.

M. Celina, K.T. Gillen, A.C. Graham, R.A. Assink, and L.M. Minier, Thermal Degradation Studies of a Polyurethane Propellant Binder, Rubber Chem. Technol., 2000, 73, p 678–693CrossRef

15.

R. Bernstein and K.T. Gillen, Predicting the Lifetime of Fluorosilicone o-Rings, Polym. Degrad. Stab., 2009, 94, p 2107–2113CrossRef

16.

K.T. Gillen, R. Bernstein, and M.H. Wilson, Predicting and Confirming the Lifetime of o-Rings, Polym. Degrad. Stab., 2005, 87, p 257–270CrossRef

17.

K.T. Gillen, M. Celina, and R. Bernstein, Validation of Improved Methods for Predicting Long-Term Elastomeric Seal Lifetimes from Compression Stress-Relaxation and Oxygen Cconsumption Techniques, Polym. Degrad. Stab., 2003, 82, p 25–35CrossRef

18.

J.R. Cho, K.C. Han, J.S. Kim, S.B. Lee, and O.K. Lim, Fatigue Life Prediction and Optimum Topology Design of EPDM Weather Strip, Finite Elem. Anal. Des., 2012, 60, p 57–63CrossRef

19.

F. Le Lay, Study on the Lifetime of EPDM Seals in Nuclear-Powered Vessels, Radiat. Phys. Chem., 2013, 84, p 210–217CrossRef

20.

A. Kommling, M. Jaunich, and D. Wolff, Effects of Heterogeneous Aging in Compressed HNBR and EPDM O-Ring Seals, Polym. Degrad. Stab., 2016, 126, p 39–46CrossRef

21.

T. Cui, Y.J. Chao, and J.W. Van Zee, Stress Relaxation Behavior of EPDM Seals in Polymer Electrolyte Membrane Fuel Cell Environment, Int. J Hydrog. Energy, 2012, 37, p 13478–13483CrossRef

22.

ASTM Standard 6147-97, Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

23.

GB/T 7759-1996, Rubber, Vulcanized or Thermoplastic—Determination of Compression Set at Ambient Elevated or Low Temperatures

24.

A.V. Tobolsky, Properties and Structure of Polymers, Wiley, New York, 1960

25.

J.D. Ferry, Viscoelastic Properties of Polymers, 2nd ed., Wiley, New York, 1970

26.

K. Murakami and K. Ono, Chemorheology of Polymers, Elsevier, Amsterdam, 1979

27.

J.G. Curro and P. Pincus, A Theoretical Basis for Viscoelastic Relaxation of Elastomers in the Long-Term Limit, Macromolecules, 1983, 16, p 559–562CrossRef

28.

S. Ronan, T. Alshuth, S. Jerrams, and N. Murphy, Long-Term Stress Relaxation Prediction for Elastomers Using the Time–Temperature Superposition Method, Mater. Des., 2007, 28, p 1513–1523CrossRef

Titel: Service Lifetime Estimation of EPDM Rubber Based on Accelerated Aging Tests
verfasst von: Jie Liu
Xiangbo Li
Likun Xu
Tao He
Publikationsdatum: 27.02.2017
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 4/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2519-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2017

Development of Oxide Dispersion Strengthened (ODS) Ferritic Steel Through Powder Forging

Corrosion Behavior of Copper-Clad Steel Bars with Unclad Two-End Faces for Grounding Grids in the Red Clay Soil

Comparison of Si Refinement Efficiency of Electromagnetic Stirring and Ultrasonic Treatment for a Hypereutectic Al-Si Alloy

Influence of SMAT Parameters on Microstructural and Mechanical Properties of Al-Mg-Si Alloy AA 6061

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

The Effect of Thermo-Mechanical Treatment on Structure of Ultrahigh Carbon PM Steel

Premium Partner

Marktübersichten