nach oben

Journal of Materials Engineering and Performance

Erschienen in:

Open Access 16.04.2020

High-Strength Low-Cost Nano-Bainitic Steel

verfasst von: Mohamad Akram, Heinz Palkowski, Mohamed Soliman

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 4/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Low-cost, fast-transforming carbide-free nano-bainitic steel has been produced with tensile strengths up to 2140 MPa and elongation values of around 10%. An alloying concept of combining low Mn (0.29 wt.%) and moderate Al (~ 1 wt.%) additions enabled full transformation in 10 min to less than 2 h at austempering temperatures ranging from 235 to 310 °C. Dilatometric experiments and thermodynamic simulation via ThermoCalc software were employed to design the heat treatment procedure. The resulting structures were investigated using scanning electron microscopy and synchrotron x-ray diffraction. Mechanical characterization was performed via hardness, tensile, and impact testing at room temperature. The strain-aging response for the alloy system was also investigated.

Vorheriger Artikel The Effect of Solution Heat Treatment Temperature on Phase Transformations, Microstructure and Properties of Ti-25Ta-xZr Alloys Used as a Biomaterial

Nächster Artikel Bainitic Transformation and Mechanical Properties of Low-Carbon High-Strength Bainitic Steels with Mo Addition

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

J. He, A. Zhao, Y. Huang, C. Zhi, and F. Zhao, Acceleration of Bainite Transformation at Low Temperature by Warm Rolling Process, Mater. Today Proc., 2015, 2, p S289–S294. https://doi.org/10.1016/j.matpr.2015.05.040CrossRef

S.H. He, B.B. He, K.Y. Zhu, and M.X. Huang, On the Correlation Among Dislocation Density, Lath Thickness and Yield Stress of Bainite, Acta Mater., 2017, 135, p 382. https://doi.org/10.1016/j.actamat.2017.06.050CrossRef

M. Soliman and H. Palkowski, Development of the Low Temperature Bainite, Arch. Civ. Mech. Eng., 2016, 16(3), p 03. https://doi.org/10.1016/j.acme.2016.02.007CrossRef

M.N. Yoozbashi, S. Yazdani, and T.S. Wang, Design of a New Nanostructured, High-Si Bainitic Steel with Lower Cost Production, Mater. Des., 2011, 32(6), p 3248. https://doi.org/10.1016/j.matdes.2011.02.031CrossRef

W. Gong, Y. Tomota, M.S. Koo, and Y. Adachi, Effect of Ausforming on Nanobainite Steel, Scr. Mater., 2010, 63(8), p 819. https://doi.org/10.1016/j.scriptamat.2010.06.024CrossRef

W. Gong, Y. Tomota, S. Harjo, Y.H. Su, and K. Aizawa, Effect of Prior Martensite on Bainite Transformation in Nanobainite Steel, Acta Mater., 2015, 85, p 243. https://doi.org/10.1016/j.actamat.2014.11.029CrossRef

A. Varshney, S. Sangal, S. Kundu, and K. Mondal, Super Strong and Highly Ductile Low Alloy Multiphase Steels Consisting of Bainite, Ferrite and Retained Austenite, Mater. Des., 2016, 95, p 75. https://doi.org/10.1016/j.matdes.2016.01.078CrossRef

M. Soliman and H. Palkowski, Microstructure Development and Mechanical Properties of Medium Carbon Carbide-Free Bainite Steels, Procedia Eng., 2014, 81, p 1306. https://doi.org/10.1016/j.proeng.2014.10.148CrossRef

M. Kabirmohammadi, B. Avishan, and S. Yazdani, Transformation Kinetics and Microstructural Features in Low-Temperature Bainite After Ausforming Process, Mater. Chem. Phys., 2016, 184, p 306. https://doi.org/10.1016/j.matchemphys.2016.09.057CrossRef

10.

F.G. Caballero and H.K.D.H. Bhadeshia, Very Strong Bainite, Curr. Opin. Solid State Mater. Sci., 2004, 8(3–4), p 251. https://doi.org/10.1016/j.cossms.2004.09.005CrossRef

11.

F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones, and P. Brown, Very Strong Low Temperature Bainite, Mater. Sci. Technol., 2002, 18(3), p 279. https://doi.org/10.1179/026708301225000725CrossRef

12.

H. Amel-Farzad, H.R. Faridi, F. Rajabpour, A. Abolhasani, S. Kazemi, and Y. Khaledzadeh, Developing Very Hard Nanostructured Bainitic Steel, Mater. Sci. Eng. A, 2013, 559, p 68. https://doi.org/10.1016/j.msea.2012.08.020CrossRef

13.

S. Golchin, B. Avishan, and S. Yazdani, Effect of 10% Ausforming on Impact Toughness of Nano Bainite Austempered at 300 °C, Mater. Sci. Eng. A, 2016, 656, p 94. https://doi.org/10.1016/j.msea.2016.01.025CrossRef

14.

J. Zhao, X. Jia, K. Guo, N.N. Jia, Y.F. Wang, Y.H. Wang, and T.S. Wang, Transformation Behavior and Microstructure Feature of Large Strain Ausformed Low-Temperature Bainite in a Medium C–Si Rich Alloy Steel, Mater. Sci. Eng. A, 2017, 682, p 527. https://doi.org/10.1016/j.msea.2016.11.073CrossRef

15.

A. Eres-Castellanos, L. Morales-Rivas, A. Latz, F.G. Caballero, and C. Garcia-Mateo, Effect of Ausforming on the Anisotropy of Low Temperature Bainitic Transformation, Mater. Charact., 2018, 145, p 371. https://doi.org/10.1016/j.matchar.2018.08.062CrossRef

16.

H. Hu, G. Xu, F. Dai, J. Tian, and G. Chen, Critical Ausforming Temperature to Promote Isothermal Bainitic Transformation in Prior-Deformed Austenite, Mater. Sci. Technol., 2019, 35(4), p 420. https://doi.org/10.1080/02670836.2019.1567663CrossRef

17.

Y. Toji, H. Matsuda, and D. Raabe, Effect of Si on the Acceleration of Bainite Transformation by Pre-existing Martensite, Acta Mater., 2016, 116, p 250. https://doi.org/10.1016/j.actamat.2016.06.044CrossRef

18.

M. Soliman and H. Palkowski, Ultra-fine Bainite Structure in Hypo-Eutectoid Steels, ISIJ Int., 2007, 47(12), p 1703. https://doi.org/10.2355/isijinternational.47.1703CrossRef

19.

H. Palkowski, Thermomechanisch hergestellter extrem fester Bainit mit reduziertem C-Gehalt, Deutsche Forschungsgemeinschaft (DFG), 2011

20.

C. Garcia-Mateo and F.G. Caballero, Ultra-high-strength Bainitic Steels, ISIJ Int., 2005, 45(11), p 1736. https://doi.org/10.2355/isijinternational.45.1736CrossRef

21.

S.M. Hasan, M. Ghosh, D. Chakrabarti, and S.B. Singh, Development of Continuously Cooled Low-Carbon, Low-Alloy, High Strength Carbide-Free Bainitic Rail Steels, Mater. Sci. Eng. A, 2020, 771, p 138590. https://doi.org/10.1016/j.msea.2019.138590CrossRef

22.

H.-S. Yang and H.K.D.H. Bhadeshia, Designing Low Carbon, Low Temperature Bainite, Mater. Sci. Technol., 2008, 24(3), p 335. https://doi.org/10.1179/174328408x275982CrossRef

23.

J. Wang, P.J. van der Wolk, and S. van der Zwaag, On the Influence of Alloying Elements on the Bainite Reaction in Low Alloy Steels During Continuous Cooling, J. Mater. Sci., 2000, 35(17), p 4393. https://doi.org/10.1023/a:1004865209116CrossRef

24.

M. Soliman and H. Palkowski, Verfahren zum Herstellen eines Bauteils mit bainitischem Gefüge und entsprechendes BauteilDE 102012017143B3 I, 30 August 2012

25.

J.-Y. Tian, G. Xu, M.-X. Zhou, H.-J. Hu, and Z.-L. Xue, Effects of Al Addition on Bainite Transformation and Properties of High-Strength Carbide-Free Bainitic Steels, J. Iron Steel Res. Int., 2019, 17(1), p 49. https://doi.org/10.1007/s42243-019-00253-7CrossRef

26.

E28 Committee, Test Methods for Tension Testing of Metallic Materials. ASTM International, West Conshohocken. https://doi.org/10.1520/e0008_e0008m-16a.

27.

DIN EN ISO 6892-1:2017-02, Metallische Werkstoffe_- Zugversuch_- Teil_1: Prüfverfahren bei Raumtemperatur (ISO_6892-1:2016); Deutsche Fassung EN_ISO_6892-1:2016. Beuth Verlag GmbH, Berlin. https://doi.org/10.31030/2384831.

28.

E28 Committee, Test Methods for Notched Bar Impact Testing of Metallic Materials. ASTM International, West Conshohocken. https://doi.org/10.1520/e0023-18.

29.

B.D. Cullity and S.R. Stock, Elements of X-ray Diffraction, 3rd ed., Prentice Hall, London, 2001

30.

M. Soliman and H. Palkowski, Tensile Properties and Bake Hardening Response of Dual Phase Steels with Varied Martensite Volume Fraction, Mater. Sci. Eng. A, 2020, 777, p 139044. https://doi.org/10.1016/j.msea.2020.139044CrossRef

31.

J. Yang, T.S. Wang, B. Zhang, and F.C. Zhang, Microstructure and Mechanical Properties of High-Carbon Si–Al-Rich Steel by Low-Temperature Austempering, Mater. Des., 2012, 35, p 170. https://doi.org/10.1016/j.matdes.2011.08.041CrossRef

32.

W. Liu, B. Zhang, A. Zhao, H. Guo, and S. Sun, Control of Morphology and Dimension of Blocky Retained Austenite in Medium-Carbon Steel, Mater. Res. Express, 2019, 6(1), p 16526. https://doi.org/10.1088/2053-1591/aae561CrossRef

33.

H. Zou, H. Hu, G. Xu, Z. Xiong, and F. Dai, Combined Effects of Deformation and Undercooling on Isothermal Bainitic Transformation in an Fe–C–Mn–Si Alloy, Metals, 2019, 9(2), p 138. https://doi.org/10.3390/met9020138CrossRef

34.

M. Soliman, H. Mostafa, A.S. El-Sabbagh, and H. Palkowski, Low Temperature Bainite in Steel with 0.26 wt% C, Mater. Sci. Eng. A, 2010, 527(29–30), p 7706. https://doi.org/10.1016/j.msea.2010.08.037CrossRef

35.

J. Yang, H. Qiu, P. Xu, H. Yu, and Y. Wang, The Substitution of Aluminum for Cobalt in Nanostructured Bainitic Steels, AIP Conf. Proc., 2018, 1971(1), p 20001. https://doi.org/10.1063/1.5041096CrossRef

36.

A.M. Belkin, M.Y. Belkin, A.P. Vishnevskii, and V.I. Rulev, Notch Sensitivity of Structural Steels in Different Structural States, Met. Sci. Heat Treat., 1989, 31(1), p 42. https://doi.org/10.1007/bf00735328CrossRef

37.

F. Zhang and Z. Yang, Development of and Perspective on High-Performance Nanostructured Bainitic Bearing Steel, Engineering, 2019, 5(2), p 319. https://doi.org/10.1016/j.eng.2018.11.024CrossRef

38.

H.K.D.H. Bhadeshia and D.V. Edmonds, Bainite in Silicon Steels: New Composition–Property Approach Part 2, Met. Sci., 1983, 17(9), p 420. https://doi.org/10.1179/030634583790420646CrossRef

39.

H.K.D.H. Bhadeshia and D.V. Edmonds, Bainite in Silicon Steels: New Composition–Property Approach Part 1, Met. Sci., 1983, 17(9), p 411. https://doi.org/10.1179/030634583790420600CrossRef

40.

C. Garcia-Mateo, F.G. Caballero, and H.K.D.H. Bhadeshia, Acceleration of Low-Temperature Bainite, ISIJ Int., 2003, 43(11), p 1821. https://doi.org/10.2355/isijinternational.43.1821CrossRef

41.

L. Guo, H. Roelofs, M.I. Lembke, and H.K.D.H. Bhadeshia, Modelling of Size Distribution of Blocky Retained Austenite in Si-Containing Bainitic Steels, Mater. Sci. Technol., 2018, 34(1), p 54. https://doi.org/10.1080/02670836.2017.1354797CrossRef

42.

S. Lee, S.-J. Lee, and B.C. de Cooman, Austenite Stability of Ultrafine-Grained Transformation-Induced Plasticity Steel with Mn Partitioning, Scr. Mater., 2011, 65(3), p 225. https://doi.org/10.1016/j.scriptamat.2011.04.010CrossRef

Titel: High-Strength Low-Cost Nano-Bainitic Steel
verfasst von: Mohamad Akram
Heinz Palkowski
Mohamed Soliman
Publikationsdatum: 16.04.2020
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 4/2020
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-020-04771-4

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 4/2020

Effects of Surface Treatment on the Cavitation Erosion–Corrosion Performance of 17-4PH Stainless Steel in Sodium Chloride Solution

Effects of Boron Content on Microstructure and Mechanical Properties of TiAlSiBxN Nanocomposite Films

Retardation Effect of Tin Multilayer on Sn-3.0Ag-0.5Cu (SAC305)-Based Solder Joint Interface

A Magnetic Nondestructive Evaluation Method to Simultaneously Determine Chemical Composition and Heat Treatment Characteristics of Plain Carbon Steels: A Statistical Modeling Approach

Effect of Pulsed Current Frequency on Microstructure and Mechanical Properties of Gas-Tungsten-Arc-Welded Joints of UNS R30155

Electrochemical and Tribological Properties of CrAlN, TiAlN, and CrTiN Coatings in Water-Based Cutting Fluid

Premium Partner

Marktübersichten