Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
MTZ-Fachkongress

Antriebe und Energiesysteme von morgen


Austausch von Automobil- und Energiewirtschaft

Am 14./15. Mai geht es in Chemnitz um die Mobilitätswende durch Elektro- und Wasserstofffahrzeuge.
Erweiterte Suche
Anmelden
nach oben
Journal of Materials Engineering and Performance
Erschienen in: Journal of Materials Engineering and Performance 8/2022

28.02.2022 | Technical Article

Effect of Hot Extrusion Ratio on the Mechanical Properties and Microstructure of a 0.5 wt.% Graphene Nanoplatelet-Reinforced Aluminum Matrix Composite

verfasst von: Shumei Lou, Lingwei Ran, Yongqiang Liu, Peng Chen, Chunjian Su, Qingbiao Wang

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 8/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

A 0.5 wt.% graphene nanoplatelet-reinforced aluminum composite (0.5 wt.% GNPs/Al composite) was prepared by powder metallurgy and extruded at ratios of 8:1, 11:1, 17:1, 25:1 and 36:1 to study the effects of the extrusion ratio on the mechanical properties and microstructure of the composite. It is found that the composite shows the best general mechanical properties at an extrusion ratio of 17:1 tensile strength of 164.49 MPa, elongation of 21.81%, bending strength of 325.47 MPa, and a Young’s modulus of 62.01 GPa. An extrusion ratio (8:1 or 11:1) that is too low results in poor grain refinement, separation of the GNP layers and ordinary properties. However, an extrusion ratio that is too large can also lead to grain growth (such as 25:1) or a reduction in GNP integrity (such as 36:1), which affects the strengthening efficiency of hot extrusion negatively.
Vorheriger Artikel Silicon Modified Polyethylene as Foam Stabilizer and its Effect on Cell Structure and Mechanical Properties of Polypropylene Foam
Nächster Artikel Timeless Powder Hot Compaction of Nickel-Reinforced Al/(Al2O3-Graphene Nanosheet) Composite for Light Applications Using Hydrazine Reduction Method

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
F. Mokdad, D.L. Chen, Z.Y. Liu, B.L. Xiao, D.R. Ni and Z.Y. Ma, Deformation and Strengthening Mechanisms of a Carbon Nanotube Reinforced Aluminum Composite, Carbon, 2016, 104, p 64-77.CrossRef
2.
E.I. Salama, A. Abbas and A.K. Esawi, Preparation and Properties of Dual-Matrix Carbon Nanotube-Reinforced Aluminum Composites, Compos. A, 2017, 99, p 84-93.CrossRef
3.
N.S. Pourmand and H. Asgharzadeh, Aluminum Matrix Composites Reinforced with Graphene: A Review on Production Microstructure and Properties, Crit. Rev. Solid State Mater. Sci., 2019, 45(4), p 289–337.CrossRef
4.
B.S. Guo, M. Song, J.H. Yi, S. Ni, T. Shen and Y. Du, Improving the Mechanical Properties of Carbon Nanotubes Reinforced Pure Aluminum Matrix Composites by Achieving Non-Equilibrium Interface, Mater. Des., 2017, 120, p 56-65.CrossRef
5.
Z. Zheng, X.X. Zhang, J.C. Li and L. Geng, High-Content Graphene Nanoplatelet Reinforced Aluminum Composites Produced by Ball Milling and Hot Extrusion, Sci. China, 2020, 63(08), p 1426-1435.CrossRef
6.
T.L. Han, F.C. Wang, J.J. Li, N.Q. Zhao and C.N. He, Simultaneously Enhanced Strength and Ductility of Al matrix composites through the Introduction of Intragranular Nano-Sized Graphene Nanoplates, Compos. Part B, 2021, 212, p 108700.CrossRef
7.
Y.M. Xie, X.C. Meng, Y.X. Huang, J.C. Li and J. Cao, Deformation-Driven Metallurgy of Graphene Nanoplatelets Reinforced Aluminum Composite for the Balance between Strength and Ductility, Compos. Part B., 2019, 177, p 107413.CrossRef
8.
S.M. Lou, Y.Q. Liu, C.D. Qu, G.X. Guo, L.W. Ran, P.P. Zhang and C.J. Su, Influence of a Hot Extrusion with Rectangular Section on Mechanical Properties and Microstructure of 0.5 wt% Graphene Nanoplate-Reinforced Aluminum Composites, Adv. Eng. Mater., 2021, 23(4), p 2001127.CrossRef
9.
B.Y. Ju, W.S. Yang, P.Z. Shao, M. Hussain, Q. Zhang, Z.Y. Xiu, X.W. Hou, J. Qiao and G.H. Wu, Effect of Interfacial Microstructure on the Mechanical Properties of GNPs/Al Composites, Carbon, 2020, 162, p 346-355. CrossRef
10.
Y.Y. Jiang, R. Xu, Z.Q. Tan, G. Ji, G.L. Fan, Z. Li, D.B. Xiong, Q. Guo, Z.Q. Li and D. Zhang, Interface-Induced Strain Hardening of Graphene Nanosheet/Aluminum Composites, Carbon., 2019, 146, p 17-27. CrossRef
11.
W.S. Yang, Q.Q. Zhao, L. Xin, J. Qiao, J.Y. Zou, P.Z. Shao, Z.H. Yu, Q. Zhang and G.H. Wu, Microstructure and Mechanical Properties of Graphene Nanoplates Reinforced Pure Al Matrix Composites Prepared by Pressure Infiltration Method, J. Alloys Compd, 2018, 732, p 748-758. CrossRef
12.
N.S. Anas, M. Ramakrishna and R. Vijay, Microstructural Characteristics and Mechanical Properties of CNT/Ni Coated CNT–Dispersed Al Alloys Produced by High Energy Ball Milling and Hot Extrusion, Met. Mater. Int., 2020, 26(2), p 272-283.CrossRef
13.
H.P. Zhang, C. Xu, W.L. Xiao, K. Ameyama and C.L. Ma, Enhanced Mechanical Properties of Al5083 Alloy with Graphene Nanoplates Prepared by Ball Milling and Hot Extrusion Mater, Sci. Eng., 2016, 658, p 8-15.CrossRef
14.
A. Saboori, R. Casati, A. Zanatta, M. Pavese, C. Badini and M. Vedani, Effect of Graphene Nanoplatelets on Microstructure and Mechanical Properties of AlSi10Mg Nanocomposites Produced by Hot Extrusion, Powder Metall. Met. Ceram., 2018, 56(11–12), p 647-655.CrossRef
15.
Z.F. Wei, Y.S. Lei, H. Yan, X.H. Xu and J.J. He, Microstructure and Mechanical Properties of A356 Alloy with Yttrium Addition Processed by Hot Extrusion, J. Rare Earths, 2019, 37(6), p 659-667.CrossRef
16.
F. Mokdad, D.L. Chen, Z.Y. Liu, D.R. Ni, B.L. Xiao and Z.Y. Ma, Hot Deformation and Activation Energy of a CNT-Reinforced Aluminum Matrix Nanocomposite, Mater. Sci. Eng., 2017, 695, p 322-331.CrossRef
17.
D. Jeyasimman, K. Sivaprasad, S. Sivasankaran and R. Narayanasamy, Fabrication and Consolidation Behavior of Al 6061 Nanocomposite Powders Reinforced by Multi-Walled Carbon Nanotubes, Powder Technol., 2014, 258, p 189-197.CrossRef
18.
S. Wang, T.T. Zheng, M. Xie, A. Li and P. Hou, Densification Behavior of Ag-Graphene Composites Prepared by Low-pressure Compressing and Vacuum Sintering, Rare Met. Mater. Eng., 2019, 48(11), p 3494.
19.
L.Y. Sheng, X.R. Zhang, H. Zhao and B.N. Du, Influence of Multi-Pass Hot Extrusion on Microstructure and Mechanical Properties of the Mg–4Zn–1.2Y–0.8Nd Alloy, Crystals, 2021, 11(4), p 425.CrossRef
20.
P.Z. Shao, W.S. Yang, Q. Zhang, Q.Y. Meng, X. Tan, Z.Y. Xiu, J. Qiao, Z.H. Yu and G.H. Wu, Microstructure and Tensile Properties of 5083 Al Matrix Composites Reinforced with Graphene Oxide and Graphene Nanoplates Prepared by Pressure Infiltration Method, J. Composites, Part A., 2018, 109, p 151-162.CrossRef
21.
C.H. Li, R.S. Qiu, B.F. Luan and Z.Q. Li, Effect of Carbon Nanotubes and High Temperature Extrusion on the Microstructure Evolution of Al-Cu Alloy, Mater. Sci. Eng A, 2017, 704, p 38-44.CrossRef
22.
Z.Y. Xu, C.J. Li, K.R. Li, J.H. Yi, J.J. Tang, Q.X. Zhang, X.Q. Liu, R. Bao and X. Li, J Carbon Nanotube-Reinforced Aluminum Matrix Composites Enhanced by Grain Refinement and In Situ Precipitation, Mater. Sci., 2019, 54(11), p 8655-8664.CrossRef
23.
X.J. Wang, X.M. Wang, X.S. Hu and K. Wu, Effects of Hot Extrusion on Microstructure and mechanical Properties of Mg Matrix Composite Reinforced with Deformable TC4 Particles, J. Magnesium Alloys., 2020, 8, p 421-430.CrossRef
24.
Q. Yang, D.L. Cheng, J. Liu, L. Wang, Z. Chen, M.L. Wang, S.Y. Zhong, Y. Wu, G. Ji and H.W. Wang, Microstructure Evolution of the TiB2/Al Composites Metallurgy during Hot Extrusion, Mater. Charact., 2019, 155, p 109834.CrossRef
25.
A. Güzel, A. Jäger, F. Parvizian, H.G. Lambers, A.E. Tekkaya, B. Svendsen and H.J. Maier, A New Method for Determining Dynamic Grain Structure Evolution during Hot Aluminum Extrusion, J. Mater. Process. Technol., 2012, 212(1), p 323–320.CrossRef
26.
Z.C. Sun, L.S. Zheng and H. Yang, Softening Mechanism and Microstructure Evolution of as-Extruded 7075 Aluminum Alloy during Hot Deformation, Mater. Charact., 2014, 90, p 71-80.CrossRef
27.
A. Ditta, L.J. Wei, Y.J. Xu and S.J. Wu, Effect of Hot Extrusion and Optimal Solution Treatment on Microstructure and Properties of Spray-Formed Al-11.3Zn-2.65Mg-1Cu Alloy, J. Alloys Compd., 2019, 797, p 558-565.CrossRef
28.
X. Lei, R.C. Wang, C.Q. Peng, Y. Feng and Y.H. Sun, Effect of Hot Extrusion on the Microstructure, Mechanical Properties, and Corrosion Behavior of Mg–11Li–3Al–2Zn–1.5Nd–0.2Zr Alloy, Trans. Indian Inst. Met., 2019, 72(10), p 2893–2899.CrossRef
29.
P.Z. Shao, G.Q. Chen, W.S. Yang, Q. Zhang, B.Y. Ju, Z.J. Wang, X. Tan, Y.Y. Pei, S.J. Zhong, M. Hussain and G.H. Wu, Effect of Hot Extrusion Temperature on Graphene Nanoplatelets Reinforced Al6061 Composite Fabricated by Pressure Infiltration Method, Carbon, 2020, 162, p 455-464.CrossRef
30.
Z.J. Yu, C. Xu, J. Meng, K. Liu, J.L. Fu and S. Kamado, Effects of Extrusion Ratio and Temperature on the Mechanical Properties and Microstructure of as-Extruded Mg-Gd-Y-(Nd/Zn)-Zr Alloys, Mater. Sci. Eng. A., 2019, 762, p 138080.CrossRef
31.
M.M. El-S, M.M.Z. Seleman and S.A. Ahmed, Microstructure and Mechanical Properties of Hot Extruded 6016 Aluminum Alloy/Graphite Composites, J. Mater. Sci. Technol., 2018, 34(09), p 1580–1591.CrossRef
32.
S.M. Lou, C.D. Qu, G.X. Guo, L.W. Ran, Y.Q. Liu, P.P. Zhang, S. Chun Jian and Q.B. Wang, Effect of Fabrication Parameters on the Performance of 0.5 wt.% Graphene Nanoplates-Reinforced Aluminum Composites, Materials, 2020, 13(16), p 3483. https://​doi.​org/​10.​3390/​ma13163483CrossRef
33.
R.V. Kumar, R. Harichandran, U. Vignesha, M. Thangavel and S.B. Chandrasekhar, Influence of Hot Extrusion on Strain Hardening Behaviour of Graphene Platelets Dispersed Aluminium Composites, J. Alloys Compd., 2021, 855, p 157448.CrossRef
34.
W.M. Jiang, J.W. Zhu, G.Y. Li, F. Guan, Y. Yu and Z.T. Fan, Enhanced Mechanical Properties of 6082 Aluminum Alloy Via SiC Addition Combined with Squeeze Casting, J. Mater. Sci. Technol., 2021, 88, p 119–131.CrossRef
35.
J.W. Zhu, W.M. Jiang, G.Y. Li, F. Guan, Y. Yu and Z.T. Fan, Microstructure and Mechanical Properties of SiCnp/Al6082 Aluminum Matrix Composites Prepared by Squeeze Casting Combined with Stir Casting, J. Mater. Process. Technol., 2020, 283, p 116699.CrossRef
36.
B.N. Du, Z.Y. Hu, L.Y. Sheng, D.K. Xu, Y.X. Qiao, B.J. Wang, J. Wang, Y.F. Zheng and T.F. Xi, Microstructural Characteristics and Mechanical Properties of the Hot Extruded Mg-Zn-Y-Nd Alloys, J. Mater. Sci. Technol., 2021, 01, p 44–55.CrossRef
37.
D.H. Nam, S.I. Cha, B.K. Lima, H.M. Park, D.S. Han and S.H. Hong, Synergistic Strengthening by Load Transfer Mechanism and Grain Refinement of CNT/Al–Cu Composites, Carbon, 2012, 50, p 2417-2423.CrossRef
38.
W.M. Jiang, Z.T. Fan, Y.C. Dai and C. Li, Effects of Rare Earth elements Addition on Microstructures, Tensile Properties and Fractography of A357 Alloy, J. Mater. Sci. Eng. A, 2014, 597(3), p 237-244.CrossRef
Metadaten
Titel
Effect of Hot Extrusion Ratio on the Mechanical Properties and Microstructure of a 0.5 wt.% Graphene Nanoplatelet-Reinforced Aluminum Matrix Composite
verfasst von
Shumei Lou
Lingwei Ran
Yongqiang Liu
Peng Chen
Chunjian Su
Qingbiao Wang
Publikationsdatum
28.02.2022
Verlag
Springer US
Erschienen in
Journal of Materials Engineering and Performance / Ausgabe 8/2022
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI
https://doi.org/10.1007/s11665-022-06723-6

Weitere Artikel der Ausgabe 8/2022

Journal of Materials Engineering and Performance 8/2022 Zur Ausgabe

Correction

Correction to: Inspection of Additively Manufactured Aero-engine Parts Using Computed Radiography Technique

Technical Article

Tuning the Properties of Additively Manufactured Tungsten Ultra-fine Lattices by Adjusting Laser Energy Density and Lattice Geometry

Technical Article

Timeless Powder Hot Compaction of Nickel-Reinforced Al/(Al2O3-Graphene Nanosheet) Composite for Light Applications Using Hydrazine Reduction Method

OriginalPaper

Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy

Technical Article

Effect of Electric Pulse-Assisted Laser Shock Peening on the Microstructure and Corrosion Resistance of High-Purity Magnesium

Technical Article

Grain Refinement Behavior of Accumulative Roll Bonding-Processed Mg-14Li-3Al-2Gd Alloy

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise