Skip to main content
Fachgebiete
Automobil + Motoren Bauwesen + Immobilien Business IT + Informatik Elektrotechnik + Elektronik Energie + Nachhaltigkeit Finance + Banking Management + Führung Marketing + Vertrieb Maschinenbau + Werkstoffe Versicherung + Risiko
DE
EN
Themenseiten
Organisationspsychologie Projektmanagement Marketing Smart Manufacturing
Bücher
Zeitschriften
Weitere Formate
Podcasts Webinare Technik Webinare Wirtschaft Kongresse Veranstaltungskalender Awards
Jetzt Einzelzugang starten
Zugang für Unternehmen
Referenzkunden
ATZ-Fachkongress

Chassis.tech plus 2024


4 Kongresse in einer Veranstaltung

Treffen Sie in München die Fachleute von Chassis, Lenkung, Bremsen sowie Reifen/Räder.
Erweiterte Suche
Anmelden
nach oben
Steel in Translation
Erschienen in: Steel in Translation 11/2019

01.11.2019

The Chemical Composition Effect of Medium-Carbon Chromomanganesemolybdenum Steel on the Structure of Drill Pipes

verfasst von: M. V. Maisuradze, D. I. Lebedev

Erschienen in: Steel in Translation | Ausgabe 11/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Dilatometric studies on medium-carbon Cr–Mn–Mo 40KhGMA steel with various chemical compositions are performed. Thermokinetic diagrams for the transformation of supercooled austenite are plotted, and the temperature-time ranges for the formation of structural components are determined. The metallographic study of the steel microstructure have been carried out after cooling at different rates. Steel hardness depending on the tempering temperature and mechanical properties in the heat-treated state are studied. By using a numerical simulation, cooling paths under heat treatment have been determined for a drill pipe with a wall thickness of 30 mm.
Vorheriger Artikel A Growth Kinetics Study and Simulation for Recrystallized Ferrite Grains under the Annealing of Automotive Steel Cold-Rolled Sheets
Nächster Artikel Production of Composite Steel Strips on Continuous Casting and Deformation Assembly

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Jetzt informieren
Literatur
1.
Filetin, T., Liščić, B., and Galinec, J., New computer-aided method for steel selection based on hardenability, Heat Treat. Met., 1996, no. 3, pp. 63–66.
2.
Cook, W.T., Morris, P.F., and Woollard, L., Calculated hardenability for improved consistency of properties in heat-treatable engineering steels, J. Mater. Eng. Perform., 1997, vol. 6, pp. 443–448.CrossRef
3.
Trzaska, J., Sitck, W., and Dobrzański, L.A., Selection method of steel grade with required hardenability, J. Achiev. Mater. Manuf. Eng., 2006, vol. 17, pp. 289–292.
4.
Tawancy, H.M., UI-Hamid, A., and Abbas, N.M., Practical Engineering Failure Analysis, Boca Raton: CRC Press, 2004.
5.
Miller, B.A., Steel hardenability and failure analysis, Pract. Failure Anal., 2001, vol. 1, pp. 45–50.CrossRef
6.
Totten, G.E., Steel Heat Treatment: Metallurgy and Technologies, Boca Raton: CRC Press, 2006.CrossRef
7.
Yamada, M., Yan, L., Takaku, R., et al., Effects of alloying elements on the hardenability, toughness and the resistance of stress corrosion cracking 1 to 3 mass % Cr low alloyed steel, ISIJ Int., 2014, vol. 54, pp. 240–247.CrossRef
8.
Bhargava, A.K. and Banerjee, M.K., Hardenability of steel, in Comprehensive Material Finishing, Vol. 2: Surface and Heat Treatment Processes, Amsterdam: Elsevier, 2017, chap. 2.2, pp. 50–70.
9.
Mae, Y., Correlation of the effects of alloying elements on the hardenability of steels to the diffusion coefficients of elements in Fe, Int. J. Mater. Sci. Appl., 2017, vol. 6, pp. 200–206.
10.
Han, F., Hwang, B., Suh, D.-W., et al., Effect of molybdenum and chromium on hardenability of low-carbon boron-added steels, Met. Mater. Int., 2008, vol. 14, pp. 667–672.CrossRef
11.
Calcagnotto, M., Ponge, D., and Raabe, D., On the effect of manganese on grain size stability and hardenability in ultrafine-grained ferrite/martensite dual-phase steels, Metall. Mater. Trans. A, 2012, vol. 43, pp. 37–46.CrossRef
12.
Titova, T.I., Shulgan, N.A., and Malykhina, I.Yu., Effect of boron microalloying on the structure and hardenability of building steel, Met. Sci. Heat Treat., 2007, vol. 49, pp. 39–44.CrossRef
13.
Ma, Q., Huang, L., Di, G., et al., Effect of microalloying elements on microstructure and properties of quenched and tempered construction steels, IOP Conf. Ser.: Mater. Sci. Eng., 2017, vol. 242, p. 012036.
14.
Maisuradze, M.V., Ryzhkov, M.A., Yudin, Y.V., et al., Transformations of supercooled austenite in a promising high-strength steel grade under continuous cooling conditions, Met. Sci. Heat Treat., 2017, vol. 59, pp. 486–490.CrossRef
15.
Ryzhkov, M.A. and Popov, A.A., Methodological aspects of plotting of thermokinetic diagrams of transformation of supercooled austenite in low-alloy steels, Met. Sci. Heat Treat., 2011, vol. 52, pp. 612–616.
16.
Yudin, Yu.V., Maisuradze, M.V., Ryzhkov, M.A., et al., Simplified simulation method of round steel bar cooling, ISIJ Int., 2015, vol. 55, no. 7, pp. 1538–1540.CrossRef
17.
Maisuradze, M.V., Yudin, Yu.V., and Ryzhkov, M.A., Modeling of cooling of steel simple-shape products after thermal treatment, Stal’, 2013, no. 10, pp. 90–94.
18.
Maisuradze, M.V., Ryzhkov, M.A., and Yudin, Yu.V., Rapid evaluation of the cooling capacity of quenching media, Met. Sci. Heat Treat., 2015, vol. 57, nos. 7–8, pp. 515–518.CrossRef
19.
Chirkin, V.S., Teplofizicheskie svoistva materialov (Thermophysical Properties of Materials), Moscow: Fizmatgiz, 1959.
20.
Maisuradze, M.V. and Ryzhkov, M.A., Improving the impact toughness of the Hy–Tuf steel by austempering, AIP Conf. Proc., 2018, vol. 2053, pp. 040054-1–040054-4.
Metadaten
Titel
The Chemical Composition Effect of Medium-Carbon Chromomanganesemolybdenum Steel on the Structure of Drill Pipes
verfasst von
M. V. Maisuradze
D. I. Lebedev
Publikationsdatum
01.11.2019
Verlag
Pleiades Publishing
Erschienen in
Steel in Translation / Ausgabe 11/2019
Print ISSN: 0967-0912
Elektronische ISSN: 1935-0988
DOI
https://doi.org/10.3103/S096709121911010X

Weitere Artikel der Ausgabe 11/2019

Steel in Translation 11/2019 Zur Ausgabe

OriginalPaper

Reducing Heat Losses Through Blast Furnace Tuyeres

OriginalPaper

Thermodynamic Modification Aspects by Calcium of Nonmetallic Inclusions in Low-Carbon Aluminum-Killed Steels

OriginalPaper

The Technological Improvement for Continuous Casting of Section Steel, and the Measuring Methods for the Temperature during Solidification and Cooling, Report I

OriginalPaper

A Growth Kinetics Study and Simulation for Recrystallized Ferrite Grains under the Annealing of Automotive Steel Cold-Rolled Sheets

OriginalPaper

Study of the Behavior of Dioxins and Furans in the Zinc and Lead Removal Process from EAF Dust

OriginalPaper

Cold Resistance of New Casting Cr–Mn–Ni–Co Steel with 0.5% of N. Part One

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Zur Marktübersicht
    Bildnachweise