nach oben

International Journal of Material Forming

Erschienen in:

06.12.2017 | Original Research

Local strain measurements of yarns inside of 3D warp interlock fabric during forming process

verfasst von: Clément Dufour, François Boussu, Peng Wang, Damien Soulat

Erschienen in: International Journal of Material Forming | Ausgabe 6/2018

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The final geometry of 3D warp interlock fabric needs to be check during the 3D forming step to ensure the right locations of warp and weft yarns inside the final structure. Thus, a new monitoring approach has been proposed based on sensor yarns located in the fabric thickness. To ensure the accuracy of measurements, the observation of the surface deformation of the 3D warp interlock fabric has been joined to the sensor yarns measurements. At the end, it has been revealed a good correlation between strain measurement done globally by camera and locally performed by sensor yarns. Additionally, sensor yarns located in the two directions of the 3D warp interlock fabric have revealed a different forming behaviour depending on the architecture and the different slope values of the punch.

Vorheriger Artikel Single point incremental forming: state-of-the-art and prospects

Nächster Artikel Contact geometry estimation and precise radial force prediction for the radial-axial ring rolling process

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Miller AH, Dodds N, Hale JM, Gibson AG (1998) High Speed Pultrusion of Thermoplastic Matrix Composites. Compos A: Appl Sci Manuf 29(7):773–778. https://doi.org/10.1016/S1359-835X(98)00006-2 CrossRef

Hou M, Ye L, Mai Y-W (1995) Advances in Processing of Continuous Fibre Reinforced Composites With Thermoplastic Matrix. Plast Rubber Compos Process Appl 23(5):279–293 ISSN: 0959-8111

Lebrun G, Bureau MN, Denault J (2003) Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabrics. Compos Struct 61(4):341–352. https://doi.org/10.1016/S0263-8223(03)00057-6 CrossRef

Zaixia F, Zhangyu, Yanmo C, Hairu L (2016) Investigation on the Tensile Properties of Knitted Fabric Reinforced Composites made from GF-PP Commingled Yarn Preforms with Different Loop Densities. J Thermoplast Compos Mater 19(1):113–126. https://doi.org/10.1177/0892705706055446 CrossRef

Alagirusamy R, Ogale V (2016) Commingled and Air Jet-Textured Hybrid Yarns for Thermoplastic Composites. J Ind Text 33(4):223–243. https://doi.org/10.1177/1528083704044360 CrossRef

Alagirusamy R, Fangueiro R, Ogale V, Padaki N (2010) Hybrid Yarns and Textile Preforming for Thermoplastic Composites. Text Progress J 38(4):1–71. https://doi.org/10.1533/tepr.2006.0004 CrossRef

Svensson N, Shishoo R, Gilchrist M (2016) Manufacturing of Thermoplastic Composites from Commingled Yarns-A Review. J Thermoplast Compos Mater 11(1):22–56. https://doi.org/10.1177/089270579801100102 CrossRef

Mäder E, Rausch J, Schmidt N (2008) Commingled yarns – Processing aspects and tailored surfaces of polypropylene/glass composites. Compos A: Appl Sci Manuf 39(4):612–623. https://doi.org/10.1016/j.compositesa.2007.07.011 CrossRef

Ye L, Friedrich K, Kästel J (1994) Consolidation of GF/PP Commingled Yarn Composites. Appl Compos Mater 1(6):415–429. https://doi.org/10.1007/BF00706502 CrossRef

10.

Bernet N, Michaud V, Bourban P-E, Månson J-A (2001) Commingled Yarn Composites for Rapid Processing of Complex Shapes. Compos A: Appl Sci Manuf 32(11):1613–1626. https://doi.org/10.1016/S1359-835X(00)00180-9 CrossRef

11.

Fitoussi J, Bocquet M, Meraghni F (2013) Effect of the matrix behavior on the damage of ethylene–propylene glass fiber reinforced composite subjected to high strain rate tension. Compos B 45(1):1181–1191. https://doi.org/10.1016/j.compositesb.2012.06.011 CrossRef

12.

Hufenbach W, Böhm R, Thieme M, Winkler A (2011) Polypropylene/glass fibre 3D-textile reinforced composites for automotive applications. Mater Des 32(3):1468–1476. https://doi.org/10.1016/j.matdes.2010.08.049 CrossRef

13.

Faggiani A, Falzon BG (2010) Predicting low-velocity impact damage on a stiffened composite panel. Compos A: Appl Sci Manuf 41(6):737–749. https://doi.org/10.1016/j.compositesa.2010.02.005 CrossRef

14.

Falzon BG, Hawkins SC, Huynh CP, Radjef R, Brown C (2013) An investigation of Mode I and Mode II fracture toughness enhancement using aligned carbon nanotubes forests at the crack interface. Compos Struct 106:65–73. https://doi.org/10.1016/j.compstruct.2013.05.051 CrossRef

15.

Green SD, Long AC, El Said BSF, Hallett SR (2014) Numerical modelling of 3D woven preform deformations. Compos Struct 108:747–756CrossRef

16.

Mahadik Y, Robson Brown KA, Hallett SR (2010) Characterization of 3D woven composite internal architecture and effect of compaction. Compos A: Appl Sci Manuf 41(7):872–880. https://doi.org/10.1016/j.compositesa.2010.02.019 CrossRef

17.

Potluri P, Hogg P, Arshad M, Jetavat D, Jamshidi P (2012) Influence of fibre architecture on impact damage tolerance in 3D woven composites. Appl Compos Mater 5(19):799–812. https://doi.org/10.1007/s10443-012-9256-9 CrossRef

18.

Mouritz AP, Cox BN (2010) A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites. Compos A: Appl Sci Manuf 41(6):709–728. https://doi.org/10.1016/j.compositesa.2010.02.001 CrossRef

19.

Kamiya R, Cheeseman BA, Popper P, Chou TW (2000) Some recent advances in the fabrication and design of three-dimensional textile preforms: a review. Compos Sci Technol 60(1):33–47. https://doi.org/10.1016/S0266-3538(99)00093-7 CrossRef

20.

Lomov S, Bogdanovich AE, Ivanov DS, Mungalov D, Karathan M, Verpoest I (2009) A comparative study of tensile properties of non crimp 3D orthogonal weave and multi layer plain weave e-glass composites. Part1: Materials, Methods and Principal Results. Compos A: Appl Sci Manuf 40(8):1134–1143. https://doi.org/10.1016/j.compositesa.2009.03.012 CrossRef

21.

Chen X, Taylor LW, Tsai LJ (2011) An overview on fabrication of three-dimensional woven textile preforms for composites. Text Res J 81(9):932–944. https://doi.org/10.1177/0040517510392471 CrossRef

22.

Mouritz AP, Leong KH, Herszberg I (1997) A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites. Compos A: Appl Sci Manuf 28(12):979–991. https://doi.org/10.1016/S1359-835X(97)00057-2 CrossRef

23.

Mouritz AP, Cox BN (2000) A mechanistic approach to the properties of stitched laminates. Compos A: Appl Sci Manuf 31(1):1–27. https://doi.org/10.1016/S1359-835X(99)00056-1 CrossRef

24.

Pegorin F, Pingkarawat K, Daynes S, Mouritz AP (2015) Influence of z-pin length on the delamination fracture toughness and fatigue resistance of pinned composites. Compos Part B 78:298–307. https://doi.org/10.1016/j.compositesb.2015.03.093 CrossRef

25.

Mouritz AP (2007) Review of z-pinned composite laminates. Compos A: Appl Sci Manuf 38(12):2383–2397. https://doi.org/10.1016/j.compositesa.2007.08.016 CrossRef

26.

Dell’Anno G, Cartié DD, Partridge IK, Rezai A (2007) Exploring mechanical property balance in tufted carbon fabric/epoxy composites. Compos A: Appl Sci Manuf 38(11):2366–2373CrossRef

27.

Dell’Anno G, Treiber J, Partridge I (2016) Manufacturing of composite parts reinforced through-thickness by tufting. Robot Comput Integr Manuf 37:262–272. https://doi.org/10.1016/j.rcim.2015.04.004 CrossRef

28.

Dau F, Dano ML, Duplessis-Kergomard Y (2016) Experimental investigations and variability considerations on 3D interlock textile composites used in low velocity soft impact loading. Compos Struct 153:369–379. https://doi.org/10.1016/j.compstruct.2016.06.034 CrossRef

29.

Castaneda N, Wisner B, Cuadra J, Amini S, Kontsos A (2017) Investigation of the Z-binder Role in Progressive Damage of 3D Woven Composites. Compos A: Appl Sci Manuf 98:76–89. https://doi.org/10.1016/j.compositesa.2016.11.022 CrossRef

30.

Warren KC, Lopez-Anido RA, Goering J (2015) Experimental investigation of three dimensional woven composite. Compos A: Appl Sci Manuf 73:242–259. https://doi.org/10.1016/j.compositesa.2015.03.011 CrossRef

31.

Yu B, Blanc R, Soutis C, Withers PJ (2016) Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension–tension loading observed by time-lapse X-ray tomography. Compos A: Appl Sci Manuf 82:279–290. https://doi.org/10.1016/j.compositesa.2015.09.001 CrossRef

32.

Naouar N, Vidal-Sallé E, Schneider J, Maire E, Boisse P (2015) 3D composite reinforcement meso F.E analyses based on X-ray computed tomography. Compos Struct 132:1094–1104. https://doi.org/10.1016/j.compstruct.2015.07.005 CrossRef

33.

Long AC (2007) Composites Forming Technologies. Woodhead Publishing, Cambridge ISBN: 9781845690335

34.

Wang P, Hamila N, Boisse P (2013) Thermoforming simulation of multilayer composites with continuous fibres and thermoplastic matrix. Compos B 52:127–136. https://doi.org/10.1016/j.compositesb.2013.03.045 CrossRef

35.

Zhu B, Yu TX, Zhang H, Tao XM (2011) Experimental investigation of formability of commingled woven composite preform in stamping operation. Compos Part B 42(2):289–295. https://doi.org/10.1016/j.compositesb.2010.05.006 CrossRef

36.

Omrani F, Wang P, Soulat D, Ferreira M, Ouagne P (2016) Analysis of the deformability of flax-fibre nonwoven fabrics during manufacturing. Compos Part B. https://doi.org/10.1016/j.compositesb.2016.11.003 CrossRef

37.

Bel S, Hamila N, Boisse P, François D (2012) Finite element model for NCF composite reinforcement preforming: Importance of inter-ply sliding. Compos A: Appl Sci Manuf 43(12):2269–2277. https://doi.org/10.1016/j.compositea.2012.08.005 CrossRef

38.

Li XK, Bai SL (2009) Sheet forming of the multi-layered biaxial weft knitted fabric reinforcement. Part I: on hemispherical surfaces. Compos A: Appl Sci Manuf 40(6–7):766–777. https://doi.org/10.1016/j.compositea.2009.03.007 CrossRef

39.

Jacquot PB, Wang P, Soulat D, Legrand X (2015) Analysis of the preforming behavior of the braided and woven flax/polyamide fabrics. J Ind Text 46(3):698–718. https://doi.org/10.1177/1528083715591592 CrossRef

40.

Khan MA, Mabrouki T, Vidal-Sallé E, Boisse P (2010) Numerical and experimental analyses of woven composite reinforcement forming a hypoelastic behaviour. application to the double dome benchmark. J Mater Process Technol 210(2):378–388. https://doi.org/10.1016/j.jmatprotec.2009.09.027 CrossRef

41.

Ouagne P, Soulat D, Moothoo J, Capelle E, Gueret S (2013) Complex shape forming of a flax woven fabric; analysis of the tow buckling and misalignment defect. Compos A: Appl Sci Manuf 51:1–10. https://doi.org/10.1016/j.compositea.2013.03.017 CrossRef

42.

Allaoui S, Hivet G, Soulat D, Wendling A, Ouagne P, Chatel S (2014) Experimental preforming of highly double curved shapes with a case corner using an interlock reinforcement. Int J Mater Form 7(2):155–165. https://doi.org/10.1007/s12289-012-1116-5 CrossRef

43.

Allaoui S, Cellard C, Hivet G (2015) Effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms. Compos A: Appl Sci Manuf 68:336–345. https://doi.org/10.1016/j.compositesa.2014.10.017 CrossRef

44.

Dufour C, Wang P, Boussu F, Soulat D (2013) Experimental investigation about stamping behaviour of 3D warp interlock composite performs. Appl Compos Mater 21:725–738. https://doi.org/10.1007/s10443-013-9369-9 CrossRef

45.

Zhang Y, Sun F, Wang Y, Chen L, Pan N (2013) Study on intra/inter-ply shear deformation of three dimensional woven preforms for composite materials. Mater Des 59:151–159. https://doi.org/10.1016/j.matdes.2013.02.025 CrossRef

46.

De Luycker E, Morestin F, Boisse P, Marsal D (2009) Simulation of 3D interlock composite preforming. Compos Struct 88(4):615–623. https://doi.org/10.1016/j.compstruct.2008.06.005 CrossRef

47.

Charmetant A, Orliac JG, Vidal-Sallé E, Boisse P (2012) Hyperelastic model for large deformation analyses of 3D interlock composite preforms. Compos Sci Technol 72(12):1352–1360. https://doi.org/10.1016/j.compscitech.2012.05.006 CrossRef

48.

Capelle E, Ouagne P, Soulat D, Duriatti D (2014) Complex shape forming of flax woven fabrics: Design of specific blank-holder shapes to prevent defects. Compos Part B 62:29–36. https://doi.org/10.1016/j.compositesb.2014.02.007 CrossRef

49.

Trifigny N, Kelly FM, Cochrane C, Boussu F, Koncar V, Soulat D (2013) PEDOT:PSS-Based Piezo-Resistive Sensors Applied to Reinforcement Glass Fibres for in Situ Measurement during the Composite Material Weaving Process. Sensors 13(8):10749–10764. https://doi.org/10.3390/s130810749 CrossRef

50.

Maity S, Chetterjee A (2016) Conductive polymer based electro-conductive textile composites for electromagnetic interference shielding: A review. J Ind Text. https://doi.org/10.1177/1528083716670310 CrossRef

51.

European Commission (2009) One-shot manufacturing on large scale of 3D up graded panels and stiffeners for lightweight thermoplastic textile composite structure. MAPICC 3D number 263159-1, Brussels

52.

Risicato JV, Kelly F, Soulat D, Legrand X, Trümper W, Cochrane C, Koncar V (2015) A Complex Shaped Reinforced Thermoplastic Composite Part Made of Commingled Yarns With Integrated Sensor. Appl Compos Mater 22(1):81–98. https://doi.org/10.1007/s10443-014-9400-9 CrossRef

53.

Cochrane C, Konvar V, Lewandowski M, Dufour C (2007) Design and Development of a flexible Strain Sensor for Textile Structures Based on a Conductive Polymer Composite. Sensors Actuators A 7:473–492. https://doi.org/10.3390/s7040473 CrossRef

54.

Koncar V, Cochrane C, Lewandowski M, Boussu F, Dufour C (2009) Electro-conductive sensors and heating elements based on conductive polymer composites. Int J Cloth Sci Technol 21(2/3):82–92. https://doi.org/10.1108/09556220910933808 CrossRef

55.

Trifigny N, Kelly FM, Cochrane C, Boussu F, Soulat D, Koncar V (2013) In-Situ measurements of strain and stress on glass warp yarn during the weaving of 3d interlock structure with innovative sensors. In: TEXCOMP 11 Conference. Leuven, Belgium

56.

Nauman S, Cristian I, Boussu F, Koncar V (2013) Piezoresistive fibrous sensor for on line structural health monitoring of composites. In CRC Press (ed) Smart sensors for Industrial applications. ISBN-13: 978-1-4665-6810-5

57.

Nauman S, Cristian I, Boussu F, Koncar V (2010) In situ strain sensing in Three dimensional woven preform based composites using flexible tensile sensor. In: 10th TEXCOMP International Conference on Textile Composites. Lille, France, pp 363–370. ISBN: 978-1-60595-026-6

58.

Boussu F, Trifigny N, Cochrane C, Koncar V (2016) Fibrous sensors to help the monitoring of weaving process. In: Koncar V (ed) Smart Textiles and their applications. Woodhead Publishing, Cambridge ISBN: 978-0-08-100574-3

59.

Boussu F, Cristian I, Nauman S (2015) General definition of 3D warp interlock fabric architecture. Compos B 81:171–188. https://doi.org/10.1016/j.compositesb.2015.07.013 CrossRef

Titel: Local strain measurements of yarns inside of 3D warp interlock fabric during forming process
verfasst von: Clément Dufour
François Boussu
Peng Wang
Damien Soulat
Publikationsdatum: 06.12.2017
Verlag: Springer Paris
Erschienen in: International Journal of Material Forming / Ausgabe 6/2018
Print ISSN: 1960-6206
Elektronische ISSN: 1960-6214
DOI: https://doi.org/10.1007/s12289-017-1385-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2018

Methodology for metamodelling of microstructure evolution: precipitation kinetic case study

Effect of internal pressure on springback during low pressure tube hydroforming

Comprehensive benchmark study of commercial sheet metal forming simulation softwares used in the automotive industry

Investigation of the joining zone of laser welded and cross wedge rolled hybrid parts

Experimental and numerical study of a new hybrid process: multi-point incremental forming (MPIF)

Parametric study of surface morphology for selective laser melting on Ti6Al4V powder bed with numerical and experimental methods

Premium Partner

Marktübersichten