Ausgabe 13/2012
Inhalt (42 Artikel)
Conversion Model for the Martensitic Transformation of Banded Austenite in a Ferrite Matrix
Seok-Jae Lee, Javad Mola, Bruno C. De Cooman
Modification of Primary Mg2Si in Mg-4Si Alloys with Antimony
Hui-Yuan Wang, Qian Li, Bo Liu, Nan Zhang, Lei Chen, Jin-Guo Wang, Qi-Chuan Jiang
Evaluation of Al3Mg2 Precipitates and Mn-Rich Phase in Aluminum-Magnesium Alloy Based on Scanning Transmission Electron Microscopy Imaging
Yakun Zhu, David A. Cullen, Soumya Kar, Michael L. Free, Lawrence F. Allard
Transformation and Deformation Texture Study in Friction Stir Processed API X80 Pipeline Steel
Majid Abbasi, Tracy W. Nelson, Carl D. Sorensen
Nanometric Scale Investigation of Phase Transformations in Advanced Steels for Automotive Application
Josée Drillet, Nathalie Valle, Thierry Iung
In Situ Laser Synthesis of Fe-Based Amorphous Matrix Composite Coating on Structural Steel
Shravana Katakam, Jun Y. Hwang, Sameer Paital, Rajarshi Banerjee, Hitesh Vora, Narendra B. Dahotre
Microstructure of Low C Steel Isothermally Transformed in the M S to M f Temperature Range
Donghwi Kim, Seok-Jae Lee, Bruno C. De Cooman
Direct Observation that Bainite can Grow Below MS
Peter Kolmskog, Annika Borgenstam, Mats Hillert, Peter Hedström, Sudarsanam Suresh Babu, Hidenori Terasaki, Yu-Ichi Komizo
Retained Austenite Decomposition and Carbide Formation During Tempering a Hot-Work Tool Steel X38CrMoV5-1 Studied by Dilatometry and Atom Probe Tomography
Christoph Lerchbacher, Silvia Zinner, Harald Leitner
Characterization and Modeling of Precipitation Kinetics in a Fe-Si-Ti Alloy
Malika Perrier, Alexis Deschamps, Olivier Bouaziz, Yves Brechet, Frédéric Danoix, Frédéric De Geuser, Patricia Donnadieu, Khalid Hoummada, Philippe Maugis
Thermophysical Properties of Platinum-Copper Alloys
Shahid Mehmood, Ulrich E. Klotz, Gernot Pottlacher
High-Temperature Mechanical Behavior and Fracture Analysis of a Low-Carbon Steel Related to Cracking
Begoña Santillana, Rob Boom, Dmitry Eskin, Hideo Mizukami, Masahito Hanao, Masayuki Kawamoto
A Self-Consistent Approach for Necking Correction in Tensile Specimens With Rectangular Cross-Section Using a Novel Mirror Fixture
K. E. Yazzie, H. Fei, H. Jiang, N. Chawla
In Situ Observation of High Temperature Creep Behavior During Annealing of Steel
X. F. Zhang, H. Terasaki, Y. Komizo, Y. Murakami, K. Yasuda
Microstructure and Mechanical Properties of a Nitride-Strengthened Reduced Activation Ferritic/Martensitic Steel
Qiangguo Zhou, Wenfeng Zhang, Wei Yan, Wei Wang, Wei Sha, Yiyin Shan, Ke Yang
Evaluation of Structural and Optical Properties of Mn-Doped ZnO Thin Films Synthesized by Sol-Gel Technique
Eyüp F. Keskenler, Seydi Doğan, Güven Turgut, Bekir Gürbulak
Influence of Tool Offsetting on the Structure and Morphology of Dissimilar Aluminum to Copper Friction-Stir Welds
Ivan Galvão, Altino Loureiro, David Verdera, Daniel Gesto, Dulce Maria Rodrigues
Submerged Friction-Stir Welding (SFSW) Underwater and Under Liquid Nitrogen: An Improved Method to Join Al Alloys to Mg Alloys
Mohammad Ammar Mofid, Amir Abdollah-Zadeh, Farshid Malek Ghaini, Cemil Hakan Gür
Carburizing of Duplex Stainless Steel (DSS) Under Compression Superplastic Deformation
Nor Wahida Ahamad, Iswadi Jauhari
Liquid-Metal-Induced Embrittlement of Zn-Coated Hot Stamping Steel
Chang Wook Lee, Dong Wei Fan, Il Ryoung Sohn, Seok-Jae Lee, Bruno C. De Cooman
Fabrication of Porous Aluminum with Directional Pores through Continuous Casting Technique
T. Ide, Y. Iio, H. Nakajima
Microsegregation and Secondary Phase Formation During Directional Solidification of the Single-Crystal Ni-Based Superalloy LEK94
Inmaculada Lopez-Galilea, Stephan Huth, Suzana G. Fries, Nils Warnken, Ingo Steinbach, Werner Theisen
Mechanical Properties and Microstructures of Al-Fe Alloys Processed by High-Pressure Torsion
Jorge M. Cubero-Sesin, Zenji Horita
Evolution of Crystallographic Texture and Microstructure During Cold Rolling of Twinning-Induced Plasticity (TWIP) Steel: Experiments and Simulations
Nilesh P. Gurao, Pankaj Kumar, Basudev Bhattacharya, Arunansu Haldar, Satyam Suwas
Influence of the Crystalline Phase on Strain-Rate Sensitivity of a Zr-Cu-Ni-Al Bulk Metallic Glass at Room Temperature
Yongjiang Huang, Wei Zheng, Jun Shen
Controlled Forging of a Nb Containing Microalloyed Steel for Automotive Applications
Davood Nakhaie, Pooya Hosseini Benhangi, Fateh Fazeli, Mohammad Mazinani, Ebrahim Zohourvahid Karimi, Mahmoud Reza Ghandehari Ferdowsi
Ex Situ Observation of Microstructure Evolution During Abnormal Grain Growth in Aluminum Alloy
Hyung-Ki Park, Hyung-Gu Kang, Chang-Soo Park, Moo-Young Huh, Nong-Moon Hwang
Microstructural Evolution During Friction Surfacing of Dissimilar Aluminum Alloys
U. Suhuddin, S. Mironov, H. Krohn, M. Beyer, J. F. Dos Santos
Development of a New Ferrous Aluminosilicate Refractory Material for Investment Casting of Aluminum Alloys
Chen Yuan, Sam Jones, Stuart Blackburn
Enhanced Mechanical Properties of As-Forged Co-Cr-Mo-N Alloys with Ultrafine-Grained Structures
Kenta Yamanaka, Manami Mori, Akihiko Chiba
Interplay Between Residual Stresses, Microstructure, Process Variables and Engine Block Casting Integrity
Anthony Lombardi, Francesco D’Elia, Comondore Ravindran, Dimitry Sediako, B. S. Murty, Robert MacKay
Sintering of Titanium with Yttrium Oxide Additions for the Scavenging of Chlorine Impurities
R. J. Low, M. Qian, G. B. Schaffer
Assistance of Novel Artificial Intelligence in Optimization of Aluminum Matrix Nanocomposite by Genetic Algorithm
Ali Mazahery, Mohsen Ostad Shabani
Nanoscale Deformation Behavior of Phase-Reversion Induced Austenitic Stainless Steels: The Interplay Between Grain Size from Nano-Grain Regime to Coarse-Grain Regime
R. D. K. Misra, P. K. C. Venkatsurya, M. C. Somani, L. P. Karjalainen
Determination of the Minimum Scan Size to Obtain Representative Textures by Electron Backscatter Diffraction
Abhijit Brahme, Yauheni Staraselski, Kaan Inal, Raja K. Mishra
A Model for Predicting the Yield Strength Difference between Pipe and Plate of Low-Carbon Microalloyed Steel
Wenlong Zhang, Dongyan Ding, Mingyuan Gu