nach oben

Experimental Mechanics

Erschienen in:

12.04.2021 | Research paper

Micro-deformation Study of Stainless Steel Impacted by Ceramic Particle Using Electron Moiré Method

verfasst von: F. C. Lang, Y. M. Xing, S. T. Yang, Y. R. Zhao, J. J. Li

Erschienen in: Experimental Mechanics | Ausgabe 6/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Background

High-velocity oxy-fuel (HVOF)-sprayed metallic coating can be used to create a surface layer that plays a significant role in enhancing the overall strength, stiffness, and fatigue life of the treated material. The micro-deformation around a single impacted particle is a critical factor that must be considered for the optimization of the HVOF process.

Objective

In this study, the micro-deformation field of stainless steel impacted by a ceramic particle was characterized at the micro-scale.

Method

A grid with a frequency of 1200 lines/mm was fabricated on the surface of stainless steel specimen. The microscopic deformation field formed on the substreate surface, induced by the impact of micro-particles with a diameter of 18 µm, was determined using the electron moiré method and numerical simulations.

Results

The in-plane plastic strain around the impacted particle was found to be as high as 9.1%, and the value sharply decreased with the increase of the distance to the edge of the impacted particle. The diameter of the plastic area was about 40 µm, which was approximately 2.2 times larger than the particle size. The experimental results were compared with numerical simulation results, and good agreement between the results was found.

Conclusions

The electron moiré technique can be a useful tool for the measurement of the deformation field induced by an impacted particle in a very local area with a size on the order of microns.

Vorheriger Artikel A Frequency Domain Error Model for Local 2D-DIC

Nächster Artikel Dynamic Subsurface Deformation and Strain of Soft Hydrogel Interfaces Using an Embedded Speckle Pattern With 2D Digital Image Correlation

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Abbas M, Smith GM, Munroe PR (2020) Microstructural Characterization of HVOF-Sprayed Ni on Polished and Oxidized Stainless Steel Substrates. J Therm Spray Technol 29:1093–1110. https://doi.org/10.1007/s11666-020-01031-8CrossRef

Saeidi S, Voisey KT, McCartney DG (2011) Mechanical properties and microstructure of VPS and HVOF CoNiCrAlY coatings. J Therm Spray Technol 20:1231–1243. https://doi.org/10.1007/s11666-011-9666-5CrossRef

Schmidt T, Gärtner F, Assadi H, Kreye H (2006) Development of a generalized parameter window for cold spray deposition. Acta Mater 54:729–742. https://doi.org/10.1016/j.actamat.2005.10.005CrossRef

Assadi H, Gärtner F, Stoltenhoff T, Kreye H (2003) Bonding mechanism in cold gas spraying. Acta Mater 51:4379–4394. https://doi.org/10.1016/S1359-6454(03)00274-XCrossRef

Kawakita J, Katanoda H, Watanabe M, Watanabe M, Yokoyama K, Kuroda S (2008) Warm Spraying: An improved spray process to deposit novel coatings. Surf Coatings Technol 202:4369–4373. https://doi.org/10.1016/j.surfcoat.2008.04.011CrossRef

Sienkiewicz J, Kuroda S, Murakami H, Araki H, Kurzydlowski KJ (2018) Fabrication and Oxidation Resistance of TiAl Matrix Coatings Reinforced with Silicide Precipitates Produced by Heat Treatment of Warm Sprayed Coatings. J Therm Spray Technol 27:1165–1176. https://doi.org/10.1007/s11666-018-0751-xCrossRef

Luo X, Smith GM, Sampath S (2018) On the Interplay Between Adhesion Strength and Tensile Properties of Thermal Spray Coated Laminates—Part I: High Velocity Thermal Spray Coatings. J Therm Spray Technol 27:296–307. https://doi.org/10.1007/s11666-018-0695-1CrossRef

Rendler NJ, Vigness I (1966) Hole-drilling strain-gage method of measuring residual stresses. Exp Mech 6:577–586. https://doi.org/10.1007/BF02326825CrossRef

Gascoigne HE (1994) Residual surface stresses in laminated cross-ply fiber-epoxy composite materials. Exp Mech 34:27–36. https://doi.org/10.1007/BF02328439CrossRef

10.

Jiang LM, Peng J, Liao YG et al (2011) A modified layer-removal method for residual stress measurement in electrodeposited nickel films. Thin Solid Films 519:3249–3253. https://doi.org/10.1016/j.tsf.2011.01.260CrossRef

11.

Ghosh D, Subhash G, Orlovskaya N (2008) Measurement of scratch-induced residual stress within SiC grains in ZrB2-SiC composite using micro-Raman spectroscopy. Acta Mater 56:5345–5354. https://doi.org/10.1016/j.actamat.2008.07.031CrossRef

12.

Benedikt B, Kumosa M, Predecki PK, Kumosa L, Castelli MG, Sutter JK (2001) An analysis of residual thermal stresses in a unidirectional graphite/PMR-15 composite based on X-ray diffraction measurements. Compos Sci Technol 61:1977–1994. https://doi.org/10.1016/S0266-3538(01)00060-4CrossRef

13.

Woo W, An GB, Kingston EJ, Dewald AT, Smith DJ, Hill MR (2013) Through-thickness distributions of residual stresses in two extreme heat-input thick welds: A neutron diffraction, contour method and deep hole drilling study. Acta Mater 61:3564–3574. https://doi.org/10.1016/j.actamat.2013.02.034CrossRef

14.

Santana YY, La Barbera-Sosa JG, Staia MH, Lesage J, Puchi-Cabrera ES, Chicot D, Bemporad E (2006) Measurement of residual stress in thermal spray coatings by the incremental hole drilling method. Surf Coatings Technol 201:2092–2098. https://doi.org/10.1016/j.surfcoat.2006.04.056CrossRef

15.

Xing YM, Lu J (2004) An experimental study of residual stress induced by ultrasonic shot peening. J Mater Process Technol 152:56–61. https://doi.org/10.1016/j.jmatprotec.2004.02.057CrossRef

16.

Lima CRC, Nin J, Guilemany JM (2006) Evaluation of residual stresses of thermal barrier coatings with HVOF thermally sprayed bond coats using the Modified Layer Removal Method (MLRM). Surf Coatings Technol 200:5963–5972. https://doi.org/10.1016/j.surfcoat.2005.09.016CrossRef

17.

Liu D, Flewitt PEJ, Hallam KR (2014) Residual stress evolution and failure modes in a thermal barrier coating deposited on a curved substrate. Oxid Met 81:69–82. https://doi.org/10.1007/s11085-013-9425-8CrossRef

18.

Tailor S, Modi A, Modi SC (2019) Thermally Sprayed Thin Copper Coatings by W-HVOF. J Therm Spray Technol 28:273–282. https://doi.org/10.1007/s11666-018-0770-7CrossRef

19.

Venter AM, Pirling T, Buslaps T, Oladijo OP, Steuwer A, Ntsoane TP, Cornish LA, Sacks N (2012) Systematic investigation of residual strains associated with WC-Co coatings thermal sprayed onto metal substrates. Surf Coatings Technol 206:4011–4020. https://doi.org/10.1016/j.surfcoat.2012.03.081CrossRef

20.

Dally JW, Read DT (1993) Electron Beam Moiré. Exp Mech 33:270–277CrossRef

21.

Read DT, Dally JW, Szanto M (1993) Scanning Moire at High Magnification Using Optical Methods. 110–116.

22.

Kishimoto S, Asanuma H, Tanaka Y (2012) Kagawa Y (2012) Measurement of strain distribution in smart materials by electron Moiré method. Act Passiv Smart Struct Integr Syst 8341:83411J. https://doi.org/10.1117/12.915118CrossRef

23.

Hu ZX, Xie HM, Lu J, Liu ZW, Wang QH (2010) A new method for the reconstruction of micro- and nanoscale planar periodic structures. Ultramicroscopy 110:1223–1230. https://doi.org/10.1016/j.ultramic.2010.05.009CrossRef

24.

Zhu RH, Xie HM, Dai XL, Zhu JG, Jin AZ (2014) Residual stress measurement in thin films using a slitting method with geometric phase analysis under a dual beam (FIB/SEM) system Meas Sci Technol 25. https://doi.org/10.1088/0957-0233/25/9/095003

25.

Zhao CW, Xing YM (2010) Nanoscale deformation analysis of a crack-tip in silicon by geometric phase analysis and numerical moiré method. Opt Lasers Eng 48:1104–1107. https://doi.org/10.1016/j.optlaseng.2009.12.010CrossRef

26.

Pofelski A, Woo SY, Le BH, Liu XH, Zhao S, Mi Z, Loffler S, Botton GA (2018) 2D strain mapping using scanning transmission electron microscopy Moiré interferometry and geometrical phase analysis. Ultramicroscopy 187:1–12. https://doi.org/10.1016/j.ultramic.2017.12.016CrossRef

27.

Hÿtch MJ, Snoeck E, Kilaas R (1998) Quantitative measurement of displacement and strain fields from HREM micrographs. Ultramicroscopy 74:131–146. https://doi.org/10.1016/S0304-3991(98)00035-7CrossRef

28.

Kishimoto S, Egashira M, Shinya N, Carolan RA (1992) Local Micro-Deformation Analysis By Means of Microgrid and Electron Beam Moiré Fringe Method. Mech Behav Mater VI 661–666.https://doi.org/10.1016/b978-0-08-037890-9.50503-2

29.

Read DT, Dally JW, Szanto M (1993) Scanning moiré at high magnification using optical methods. Exp Mech 33:110–116. https://doi.org/10.1007/BF02322486CrossRef

30.

Xie HM, Kishimoto S, Asundi A, Boay CG, Shinya N, Yu J, Ngoi BKA (2000) In-plane deformation measurement using the atomic force microscope moire method. Nanotechnology 11:24–29. https://doi.org/10.1088/0957-4484/11/1/305CrossRef

31.

Xing YM, Kishimoto S, Shinya N (2004) Multiscanning Method for Fabricating Electron Moire Grating. Exp Mech 44:562–566. https://doi.org/10.1177/0014485104048335CrossRef

32.

Zhao YR, Lei ZK, Xing YM, Hou XH, Bai PC (2014) Fabricating Parameters Optimization of High Frequency Grating by Multi-scanning Electron Beam Method. Exp Mech 54:45–55. https://doi.org/10.1007/s11340-013-9742-5CrossRef

33.

Watanabe M, Kishimoto S, Xing YM, Shinoda K, Kuroda S (2007) Evaluation of Strain Field Around Impacted Particles by Applying Electron Moiré Method. J Therm Spray Technol 16:940–946. https://doi.org/10.1007/s11666-007-9129-1CrossRef

34.

Kishimoto S, Tanaka Y, Natio KY, kagawa, (2011) Measurement of Strain Distribution of Composite Materials by Electron-moiré method. Nanocomposites with unique properties and applications in medicine and industry. INTECH 1:226–236

35.

Kishimoto S, Shinya N, Mathew MD (1997) Application of electron beam lithography to study microcreep deformation and grain boundary sliding. J Mater Sci 32:3411–3417CrossRef

36.

Li C, Liu Z, Xie H, Wu D (2013) Novel 3D SEM Moiré method for micro height measurement. Opt Express 21:15734–15746. https://doi.org/10.1364/OE.21.015734CrossRef

37.

Wang Q, Kishimoto S, Jiang X, Yamauchi Y (2014) Spot Moiré Fringes: Determination of Domain Boundaries and Structural Parameters in Ordered Nanoporous Structures. Chem - A Eur J 20:2179–2183. https://doi.org/10.1002/chem.201303319CrossRef

38.

Lang FC, Zhao YR, Xing YM et al (2016) A novel raster-scanning method to fabricate ultra-fine cross-gratings for the generation of electron beam moiré fringe patterns. Opt Lasers Eng 86:281–290. https://doi.org/10.1016/j.optlaseng.2016.06.005CrossRef

39.

Kishimoto S (2012) Electron Moiré method. Theor Appl Mech Lett 2:011001–011007. https://doi.org/10.1063/2.1201101CrossRef

40.

Umbrello D, M’Saoubi R, Outeiro JC (2007) The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316L steel. Int J Mach Tools Manuf 47:462–470. https://doi.org/10.1016/j.ijmachtools.2006.06.006CrossRef

Titel: Micro-deformation Study of Stainless Steel Impacted by Ceramic Particle Using Electron Moiré Method
verfasst von: F. C. Lang
Y. M. Xing
S. T. Yang
Y. R. Zhao
J. J. Li
Publikationsdatum: 12.04.2021
Verlag: Springer US
Erschienen in: Experimental Mechanics / Ausgabe 6/2021
Print ISSN: 0014-4851
Elektronische ISSN: 1741-2765
DOI: https://doi.org/10.1007/s11340-021-00721-w

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Background

Objective

Method

Results

Conclusions

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2021

Cool, Dry, Nano-scale DIC Patterning of Delicate, Heterogeneous, Non-planar Specimens by Micro-mist Nebulization

A Frequency Domain Error Model for Local 2D-DIC

Bending of Soft Micropatterns in Elastohydrodynamic Lubrication Tribology

On the Cover of this Issue: A Robust Finite Element-based Filter for Digital Image and Volume Correlation Displacement Data by T.H. Becker and T.J. Marrow

Real-time 3D Digital Image Correlation for Large Deformation and Rotation Measurements Based on a Deformation Transfer Scheme

Drone-Based StereoDIC: System Development, Experimental Validation and Infrastructure Application

Premium Partner

Marktübersichten