nach oben

Metallurgical and Materials Transactions A

Erschienen in:

01.02.2008

Microstructure, Tensile, and Creep Behavior of Boron-Modified Ti-15Al-33Nb (at.%)

verfasst von: C.J. Cowen, C.J. Boehlert

Erschienen in: Metallurgical and Materials Transactions A | Ausgabe 2/2008

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effect of boron on the microstructure, tensile, and creep behavior of a Ti-15Al-33Nb (at. pct) alloy was investigated. In addition to the normal constituent phases present in the unmodified alloy, the boron-modified alloys contained borides enriched in titanium and niobium. These borides made up to 9 pct of the volume and were present in the form of needles/laths. Boron additions of 5 at. pct resulted in significant strengthening and stiffening and reduced elongation-to-failure. Smaller boron additions of 0.5 at. pct did not as significantly impact the RT tensile properties, but reduced the 650 °C yield strength by 45 pct. Constant load, tensile-creep experiments were performed in the stress range of 150 to 400 MPa and the temperature range of 650 °C to 710 °C, in both air and vacuum environments. The addition of 5 at. pct boron significantly improved the creep resistance, whereas the addition of 0.5 at. pct boron degraded the creep resistance. In-situ tensile-creep experiments indicated that localized grain boundary cracking was prevalent at the prior-β grain boundaries.

Vorheriger Artikel Effect of an Alternating Current Electric Field on the Plastic Deformation of Ultrafine-Grained 3Y-TZP at 1400 °C and 1500 °C

Nächster Artikel Evaluation of the Role of Deformation Twinning in Work Hardening Behavior of Face-Centered-Cubic Polycrystals

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

All compositions will be given in atomic percent unless otherwise stated.

JEOL is a trademark of Japan Electron Optics Ltd., Tokyo.

H.T. Kestner-Weykamp, C.W. Ward, T.F. Broderick, M.J. Kaufman: Scripta Metall., 1989, vol. 23, pp. 1697–1702CrossRef

C.J. Cowen, C.J. Boehlert: Phil. Mag. A, 2006, vol. 86, pp. 99–124CrossRef

C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2305–23CrossRef

L.A. Bendersky, W.J. Boettinger, A. Roytburd: Acta Metall. Mater., 1991, vol. 39, pp. 1059–69

C.G. Rhodes, J.A. Graves, P.R. Smith, M.R. James: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 45–52

C.J. Cowen and C.J. Boehlert: Adv. Mater. Res., 2007, Part 1, vols. 15–17, pp. 976–81

C.J. Boehlert, D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2349–67CrossRef

R.W. Hayes: Scripta Metall., 1996, vol. 34, pp. 1005–12CrossRef

R.G. Rowe, M. Larsen: in Titanium 1995, P.A. Blenkinsop, W.J. Evans, H.M. Flowers, eds., The University Press, Cambridge, United Kingdom, 1996, pp. 364–71

10.

C.J. Boehlert, J.F. Bingert: J. Mater. Process. Technol., 2001, vol. 117, pp. 401–08CrossRef

11.

S. Tamirisakandala, R.B. Bhat, J.S. Tiley, D.B. Miracle: Scripta Metall., 2005, vol. 53, pp. 1421–26CrossRef

12.

S. Tamirisakandala, D.B. Miracle, R. Srinivasan, and J.S. Gunasekera: Adv. Mater. Processes, 2006, December, pp. 41–43

13.

S. Gorsse, D.B. Miracle: Acta Mater., 2006, vol. 51, pp. 2427–42CrossRef

14.

C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, D.B. Miracle: Scripta Metall., 2006, vol. 55, pp. 465–68CrossRef

15.

F. Tang, S. Nakazawa, M. Hagiwara: Mater. Sci. Eng. A, 2001, vol. 315, pp. 147–52CrossRef

16.

M. Hagiwara, S. Emura, A. Araoka: Mater. Sci. Forum, 2003, vols. 426–432, pp. 1715–20CrossRef

17.

S.J. Yang, S. Emura, M. Hagiwara, S.W. Nam: Scripta Mater., 2003, vol. 49, pp. 897–902CrossRef

18.

M. Hagiwara, S. Emura, A. Araoka, B.O. Kong, F. Tang: Metall. Mater. Int., 2003, vol. 9, pp. 265–72CrossRef

19.

S. Emura, S.J. Yang, M. Hagiwara: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2971–79CrossRef

20.

C.J. Cowen, C.J. Boehlert: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 26–34CrossRef

21.

J.E. Hilliard: Metall. Progr., 1964, vol. 78, pp. 99–100

22.

Standard Test Methods for Determining Average Grain Size, ASTM Designation E112-96e3, ASTM, West Conshohocken, PA

23.

G.A. Hartman, S.M. Russ: in Metal Matrix Composites: Testing, Analysis and Failure Modes, W.S. Johnson, ed., ASTM, Philadelphia, PA, 1989, p. 43

24.

B.J. Kooi, Y.T. Pei, J.T.M. De Hosson: Acta Mater., 2003, vol. 51, pp. 831–45CrossRef

25.

W. Lu, D. Zhang, X. Zhang, R. Wu, T. Sakata, H. Mori: J. Alloys Compd., 2001, vol. 327, pp. 240–47CrossRef

26.

D.R. Trinkle: Scripta Mater., 2007, vol. 56, pp. 273–76CrossRef

27.

R.W. Evans and B. Wilshire: in Creep of Metals and Alloys, The Institute of Metals, New York, NY, 1985, pp. 157–90

28.

R.W. Hertzberg: in Deformation and Fracture Mechanics of Engineering Materials, 4th ed., John Wiley and Sons, New York, NY, 1996, pp. 157–211

29.

C.S. Lee, G.W. Han, R.E. Smallman, D. Feng, J.K.L. Lai: Acta Mater., 1999, vol. 47, pp. 1823–30CrossRef

30.

C.L. White, A. Choudhury: in High Temperature Ordered Intermetallic Alloys II, N.S. Stoloff, C.C. Koch, C.T. Liu, O. Izumi, eds., Materials Research Society, Boston, MA, 1987, pp. 427–41

31.

C.T. Liu, C.L. White, J.A. Horton: Acta Metall., 1985, vol. 33, pp. 213–29CrossRef

32.

E.M. Shulson, T.P. Weihs, I. Baker, H.J. Frost, J.A. Horton, Acta Metall., 1986, vol. 34, pp. 1395–99CrossRef

33.

I. Baker, E.M. Shulson, J.R. Michael: Philos. Mag. B, 1988, vol. 57, pp. 379–85CrossRef

34.

C.J. Boehlert: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1977–88CrossRef

35.

C.J. Boehlert: Mater. Sci. Eng. A, 1999, vol. 267, pp. 82–98CrossRef

36.

K.B. Panda, K.S. Ravi Chandran: Acta Mater., 2006, vol. 54, pp. 1641–57CrossRef

37.

F. Garofalo: in Fundamentals of Creep and Creep-Rupture in Metals, Macmillan, New York, NY, 1965, pp. 127–202

38.

T.K. Nandy, R.S. Mishra, A.K. Gogia, D. Banerjee: Scripta Metall., 1995, vol. 32, pp. 851–56CrossRef

39.

T.K. Nandy, R.S. Mishra, D. Banerjee: Scripta Metall., 1993, vol. 28, pp. 569–74CrossRef

40.

T.K. Nandy, D. Banerjee: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 777–86

41.

M. Hagiwara and S. Emura: Paper presented at the Workshop on Titanium Alloys Modified with Boron, Dayton, OH, Oct. 11–13, 2005

Titel: Microstructure, Tensile, and Creep Behavior of Boron-Modified Ti-15Al-33Nb (at.%)
verfasst von: C.J. Cowen
C.J. Boehlert
Publikationsdatum: 01.02.2008
Verlag: Springer US
Erschienen in: Metallurgical and Materials Transactions A / Ausgabe 2/2008
Print ISSN: 1073-5623
Elektronische ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-007-9392-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2008

Deformation-Induced Austenite-to-Ferrite Massive Transformation in Medium Carbon Steel

Effect of an Alternating Current Electric Field on the Plastic Deformation of Ultrafine-Grained 3Y-TZP at 1400 °C and 1500 °C

High-Strength Low-Carbon Ferritic Steel Containing Cu-Fe-Ni-Al-Mn Precipitates

Improvement of the Dimensional Stability of Powder Injection Molded Compacts by Adding Swelling Inhibitor into the Debinding Solvent

The Behavior of Ni, Ni-60Co, and Ni3Al during One-Dimensional Shock Loading

Three-Dimensional Orientation Microscopy in a Focused Ion Beam–Scanning Electron Microscope: A New Dimension of Microstructure Characterization

Premium Partner

Marktübersichten