nach oben

Erschienen in:

10.01.2022 | Original Research

Model smoke stream adsorption over cellulose acetate stick with three-dimensional temperature gradient by combining in-situ DRIFTS with infrared thermal imaging

verfasst von: Xin Xu, Xi Du, Feng Zheng, Lisheng Guo, Panwei Shi, Mengmeng Li, Zhengyu Fang, Jiuyi Liu, Mengdie Cai, Song Sun

Erschienen in: Cellulose | Ausgabe 3/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Understanding the adsorption of the smoke stream (SR) on cigarette filter—cellulose acetate stick with different temperatures is beneficial for controlling chemical emissions and reducing the toxic effect of smoking on human health. However the investigation of corresponding adsorption properties was missing because the adsorption of smoke stream substances on cigarette cellulose acetate is sensitive with the three-dimensional temperature gradient. In this work, the adsorption of typical smoke substances, such as CO, propylene glycol, formaldehyde, and acetone, on cellulose acetate stick were studied by in-situ diffuse reflectance Fourier transform infrared spectroscopy with different temperatures assisted by the infrared thermal imaging method. The adsorption capacities of cellulose acetate stick to these typical smoke substances is dependent on the adsorption time and temperature. The adsorption properties all fitted well with the Freundlich model. By a spectroscopic and mathematical explanation, quantifying contours of adsorption was performed. The 3D model of the normalized CO adsorption of cellulose acetate stick versus the spatial coordinates and time was established. This study gives unparalleled insight into smoke release characteristics of cigarette filtered by cellulose acetate and regulatory mechanism of cellulose acetate stick for reducing the negative effect of smoke on human health.

Graphical abstract

Vorheriger Artikel Integration of natural clay into cellulose membrane for efficient CO2/N2 separation

Nächster Artikel Stretchable, sensitive, and environment-tolerant ionic conductive organohydrogel reinforced with cellulose nanofibers for human motion monitoring

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Adam T, Mitschke S, Streibel T, Baker RR, Zimmermann R (2006) Quantitative puff-by-puff-resolved characterization of selected toxic compounds in cigarette mainstream smoke. Chem Res Toxicol 19:511–520. https://doi.org/10.1021/tx050220w

Alalwan H, Alminshid A (2020) An in-situ DRIFTS study of acetone adsorption mechanism on TiO₂ nanoparticles. Spectrochim Acta A Mol Biomol Spectrosc 229:117990. https://doi.org/10.1016/j.saa.2019.117990CrossRefPubMed

Baker RR (1974) Temperature distribution inside a burning cigarette. Nature 247:405–406. https://doi.org/10.1038/247405a0CrossRef

Baker RR (2006) Smoke generation inside a burning cigarette: Modifying combustion to develop cigarettes that may be less hazardous to health. Prog Energy Combust Sci 32:373–385. https://doi.org/10.1016/j.pecs.2006.01.001CrossRef

Boué S, Goedertier D, Hoeng J, Kuczaj A, Majeed S, Mathis C, May A, Phillips B, Peitsch M, Radtke F, Schlage W, Tan W, Vanscheeuwijck P (2020) State-of-the-art methods and devices for the generation, exposure, and collection of aerosols from heat-not-burn tobacco products. Toxicol Res Appl 4:1–40. https://doi.org/10.1177/2397847319897869CrossRef

Chang JT, Anic GM, Rostron BL, Tanwar M, Chang CM (2021) Cigarette smoking reduction and health risks: a systematic review and meta-analysis. Nicotine Tob Res 23(4):635–642. https://doi.org/10.1093/ntr/ntaa156

Chau N, Nghiem T, Doan H, Hoang Nguyen Do N, Tran V, Nguyen S, Le P (2020) Advanced fabrication and applications of cellulose acetate aerogels from cigarette butts. Mater Trans 61:1550–1554. https://doi.org/10.2320/matertrans.MT-MN2019009CrossRef

Davydov S, Posrednik O (2020) Adsorption of polar molecules on a solid substrate. Mech Solids 55:90–93. https://doi.org/10.3103/S0025654420010082CrossRef

Dong W, Qian F, Li Q, Tang G, Xiang T, Chun T, Lu J, Han Y, Xia Y, Hu J (2021) Fabrication of superhydrophobic PET filter material with fluorinated SiO₂ nanoparticles via simple sol–gel process. J Sol–gel Sci Technol 98:224–237. https://doi.org/10.1007/s10971-021-05483-4CrossRef

Du W, Wen J, Peng B, Zhang X, Xie F, Liu H, Zhong K (2015) An improved theoretical model of cigarette smoke filtration across mono-segment cellulose acetate filters. Beiträge zur Tabakforschung/Contributions to Tobacco Research 26:232–240. https://doi.org/10.1515/cttr-2015-0011

Dwyer RW, Abel SG (2015) The efficiencies of cellulose acetate filters. Beiträge zur Tabakforschung/Contributions to Tobacco Research 13:243–253. https://doi.org/10.2478/cttr-2013-0574

Dzara MJ, Artyushkova K, Shulda S, Strand MB, Ngo C, Crumlin EJ, Gennett T, Pylypenko S (2019) Characterization of complex interactions at the gas–solid interface with in situ spectroscopy: the case of nitrogen-functionalized carbon. J Phys Chem C 123:9074–9086. https://doi.org/10.1021/acs.jpcc.9b00487CrossRef

Heide J, Adam TW, Jacobs E, Wolter JM, Ehlert S, Walte A, Zimmermann R (2021) Puff-resolved analysis and selected quantification of chemicals in the gas phase of E-cigarettes, heat-not-burn devices, and conventional cigarettes using Single-Photon Ionization Time-of-Flight Mass Spectrometry (SPI-TOFMS): a comparative study. Nicotine Tob Res 23:2135–2144. https://doi.org/10.1093/ntr/ntab091CrossRefPubMed

Jia T, Wang H, Chen D, Hou M, Wu C, Tu M, Jiang Y, Zhang S (2017) 3D temperature distribution model based on thermal infrared image. J Sensors. https://doi.org/10.1155/2017/4815021CrossRef

Jiang Z, Ding X, Fang T, Huang H, Zhou W, Sun Q (2018) Study on heat transfer process of a heat not burn tobacco product flow field. J Phys Conf Ser 1064:012011. https://iopscience.iop.org/article/https://doi.org/10.1088/1742-6596/1064/1/012011

Li S, Banyasz JL, Parrish ME, Lyons-Hart J, Shafer KH (2002) Formaldehyde in the gas phase of mainstream cigarette smoke. J Anal Appl Pyrolysis 65:137–145. https://doi.org/10.1016/S0165-2370(01)00185-1CrossRef

Li B, Pang HR, Zhao LC, Wang B, Liu C, McAdam KG, Luo DS (2014) Quantifying gas-phase temperature inside a burning cigarette. Ind Eng Chem Res 53:7810–7820. https://doi.org/10.1021/ie5009822CrossRef

Li B, Zhao LC, Wang L, Liu C, McAdam KG, Wang B (2016) Gas-phase pressure and flow velocity fields inside a burning cigarette during a puff. Thermochim Acta 623:22–28. https://doi.org/10.1016/j.tca.2015.11.006CrossRef

Li C, Li EX, Zhang J, Tao Y, Zhang C, Shen X, Liu Y, Qin Y (2018) Analysis of crotonaldehyde puff-by-puff release in mainstream cigarette smoke under various smoking regimens by high-performance liquid chromatography with the modified QuEChERS method. R Soc Open Sci 5:172003. https://doi.org/10.1098/rsos.172003CrossRefPubMedPubMedCentral

Li H, Sun J, Li G, Wu D, Wang Y (2020) Real-time monitoring of surface acetone enolization and aldolization. Catal Sci Technol 10:935–939. https://doi.org/10.1039/C9CY02339ACrossRef

Meunier FC (2016) Pitfalls and benefits of in situ and operando diffuse reflectance FT-IR spectroscopy (DRIFTS) applied to catalytic reactions. React Chem Eng 1:134–141. https://doi.org/10.1039/C5RE00018ACrossRef

Oh H, Beum HT, Yoon YS, Kim J, Han Y, Kim J, Lee IB, Lee SY, Han SS (2020) Experiment and modeling of adsorption of CO from blast furnace gas onto CuCl/boehmite. Ind Eng Chem Res 59:12176–12185. https://doi.org/10.1021/acs.iecr.0c01752CrossRef

Pauwels CGGM, Klerx WNM, Pennings JLA, Boots AW, van Schooten FJ, Opperhuizen A, Talhout R (2018) Cigarette filter ventilation and smoking protocol influence aldehyde smoke yields. Chem Res Toxicol 31:462–471. https://doi.org/10.1021/acs.chemrestox.7b00342CrossRefPubMedPubMedCentral

Pham Xuan R, Xiong Y, Brietzke A, Marker S (2021) Thermal infrared imaging based facial temperature in comparison to ear temperature during a real-driving scenario. J Therm Biol 96:102806. https://doi.org/10.1016/j.jtherbio.2020.102806CrossRefPubMed

Proaño L, Tello E, Arellano-Trevino MA, Wang S, Farrauto RJ, Cobo M (2019) In-situ DRIFTS study of two-step CO₂ capture and catalytic methanation over Ru, “N_a2O”/A_l2_O3 dual functional material. Appl Surf Sci 479:25–30. https://doi.org/10.1016/j.apsusc.2019.01.281CrossRef

Roehl K, Becker S, Fuhrmeister C, Teuscher N, Füting M, Heilmann A (2009) New, non-invasive thermographic examination of body surface temperature on tetraplegic and paraplegic patients, as a supplement to existing diagnostic measures. Spinal Cord 47:492–495. https://doi.org/10.1038/sc.2008.128CrossRefPubMed

Rostami AA, Hajaligol MR (2003) Modeling the diffusion of carbon monoxide and other gases from the paper wrapper of a cigarette during puffing. J Anal Appl Pyrolysis 66(1):263–280. https://doi.org/10.1016/S0165-2370(02)00154-7CrossRef

Shi X, Wang Y, Shan Y, Yu Y, He H (2020) Investigation of the common intermediates over Fe-ZSM-5 in NH₃-SCR reaction at low temperature by in situ DRIFTS. J Environ Sci 94:32–39. https://doi.org/10.1016/j.jes.2020.02.029CrossRef

Starek A, Podolak I (2009) Carcinogenic effect of tobacco smoke. Roczniki Państwowego Zakładu Higieny 60:299–310. https://pubmed.ncbi.nlm.nih.gov/20361554/

Tofan-Lazar J, Situm A, Al-Abadleh HA (2013) DRIFTS studies on the role of surface water in stabilizing catechol-iron(III) complexes at the gas/solid interface. J Phys Chem A 117:10368–10380. https://doi.org/10.1021/jp406113rCrossRefPubMed

Wang L, Wang Z, Cheng X, Zhang M, Qin Y, Ma C (2017) In situ DRIFTS study of the NO+CO reaction on Fe–Co binary metal oxides over activated semi-coke supports. RSC Adv 7:7695–7710. https://doi.org/10.1039/C6RA26395J

Wen J, Du W, Peng B, Zhang X, Xie F, Liu H, Zhong K (2014) Filtration and retention characteristics of smoke components in filters. Beiträge Zur Tabakforschung/contributions to Tobacco Research 26:121–131. https://doi.org/10.2478/cttr-2014-0015CrossRef

Xiao Y, Yang H, Bu X, Feng P (2021) ZIF-8 derived carbon materials with multifunctional selective adsorption abilities. Carbon. https://doi.org/10.1016/j.carbon.2021.02.043CrossRef

Yang L, Liu L, Liu H, Yi L, Gu X, Liu H, Wang H (2021) Adsorption behavior of CO₂ in magnesite micro-pores at high temperature and pressure. Geosci Front 12:991–999. https://doi.org/10.1016/j.gsf.2020.06.001CrossRef

Zhang Q, Fang C, Cheng Y, Chen J, Huang Z, Han H (2020) Construction and properties of cellulose diacetate film derived from waste cigarette filters. Cellulose 27:8899–8907. https://doi.org/10.1007/s10570-020-03393-2CrossRef

Zhong J, Zeng Y, Zhang M, Feng W, Xiao D, Wu J, Chen P, Fu M, Ye D (2020) Toluene oxidation process and proper mechanism over Co₃O₄ nanotubes: Investigation through in -situ DRIFTS combined with PTR-TOF-MS and quasi in-situ XPS. Chem Eng J 397:1–12. https://doi.org/10.1016/j.cej.2020.125375CrossRef

Titel: Model smoke stream adsorption over cellulose acetate stick with three-dimensional temperature gradient by combining in-situ DRIFTS with infrared thermal imaging
verfasst von: Xin Xu
Xi Du
Feng Zheng
Lisheng Guo
Panwei Shi
Mengmeng Li
Zhengyu Fang
Jiuyi Liu
Mengdie Cai
Song Sun
Publikationsdatum: 10.01.2022
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 3/2022
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-022-04415-x

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2022

Cellulose nanofibrils for the performance improvement of ultra-high ductility cementitious composites

Synergistic effect of aluminum trihydrate and zirconium hydroxide nanoparticles on mechanical properties, flammability, and thermal degradation of polyester/jute fiber composite

Preparation of porous regenerated cellulose microstructures via emulsion-coagulation technique

Enhanced curcumin loaded nanocellulose: a possible inhalable nanotherapeutic to treat COVID-19

Green synthesis of carbon solid acid catalysts using methane sulfonic acid and its application in the conversion of cellulose to platform chemicals

Silver-nanoparticle-containing handsheets for antimicrobial applications