nach oben

Arabian Journal for Science and Engineering

Erschienen in:

23.06.2022 | Research Article-Mechanical Engineering

Modeling of Soret and Dufour’s Convective Heat Transfer in Nanofluid Flow Through a Moving Needle with Artificial Neural Network

verfasst von: Anum Shafiq, Andaç Batur Çolak, Tabassum Naz Sindhu

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 3/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, forced convective heat and mass transfer of a nanofluid using the Buongiorno model and moving radially through a thin needle has been analyzed using the Runge–Kutta fourth-order technique with shooting approach. In order to analyze the thermo-diffusion and diffusion-thermoeffects on the flow, Dufour and Soret effects have been investigated and the mass transport phenomenon has also been investigated by activation energy. Partial differential systems of the flow model have been obtained with the boundary-layer approach and modified by using the appropriate transformations to be connected to nonlinear ordinary differential systems. The Runge–Kutta technique is the most popular methodology for obtaining the numerical results to solve the differential equations. It can evaluate higher-order numerical solutions and provide answers that are as close to correct solution. Therefore, using the Runge–Kutta fourth-order strategy with a shooting strategy, a data set has been created for different flow scenarios of the interesting and comprehensive model for nanofluid (Boungiorno’s model), which incorporates Brownian motion and thermophoresis. Using this data set, an artificial neural network model has been developed to predict skin friction coefficient, Sherwood number and Nusselt number values. Seventy percentage of the data used in ANN models developed with different numbers of datasets have been used for training, \(15\%\) for validation and \( 15\%\) for testing. The results show that ANN models can predict skin friction coefficient, Sherwood number and Nusselt number values with error rates of \(-\,0.33\%\), \(0.08\%\) and \(0.03\%\), respectively.

Vorheriger Artikel Numerical Analysis of Effects of Engine Downsizing and Turbocharging on the Parameters of Performance and Emissions of an Internal Combustion Engine

Nächster Artikel Research on Health State Classification and Maintenance Strategy Optimisation of Manufacturing Equipment Based on Brittleness

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Buongiorno, J.: Convective transport in nanofluids. J. Heat Transf. 128, 240–250 (2006). https://doi.org/10.1115/1.2150834CrossRef

Kakac, S.; Pramuanjaroenkij, A.: Review of convective heat transfer enhancement with nanofluids. Int. J. Heat Mass Transf. 52, 3187–3196 (2009). https://doi.org/10.1016/j.ijheatmasstransfer.2009.02.006CrossRefMATH

Marga, S.E.B.; Palm, S.J.; Nguyen, C.T.; Roy, G.; Galanis, N.: Heat transfer enhancement by using nanofluids in forced convection flows. Int. J. Heat Fluid Flow 26, 530–546 (2005). https://doi.org/10.1016/j.ijheatfluidflow.2005.02.004CrossRef

Saidur, R.; Leong, K.Y.; Mohammad, H.A.: A review on applications and challenges of nanofluids. Renew. Sustain. Energy Rev. 15, 1646–1668 (2011). https://doi.org/10.1016/j.rser.2010.11.035CrossRef

Huminic, G.; Huminic, A.: Application of nanofluids in heat exchangers: a review. Renew. Sustain. Energy Rev. 16, 5625–5638 (2012). https://doi.org/10.1016/j.rser.2012.05.023CrossRefMATH

Sajid, M.U.; Ali, H.M.: Recent advances in application of nanofluids in heat transfer devices: a critical review. Renew. Sustain. Energy Rev. 103, 556–592 (2019). https://doi.org/10.1016/j.rser.2018.12.057CrossRef

Ramezanizadeh, M.; Ahmadi, M.H.; Nazari, M.A.; Sadeghzadeh, M.; Chen, L.: A review on the utilized machine learning approaches for modeling the dynamic viscosity of nanofluids. Renew. Sustain. Energy Rev. 114, 109345 (2019). https://doi.org/10.1016/j.rser.2019.109345CrossRef

Komeilibirjandi, A.; Raffiee, A.H.; Maleki, A.; Nazari, M.A.; Shadloo, M.S.: Thermal conductivity prediction of nanofluids containing CuO nanoparticles by using correlation and artificial neural network. J. Therm. Anal. Calorim. 139, 2679–2689 (2020). https://doi.org/10.1007/s10973-019-08838-wCrossRef

Maleki, A.; Elahi, M.; Assad, M.E.H.; Nazari, M.A.; Shadloo, M.S.; Nabipour, N.: Thermal conductivity modeling of nanofluids with ZnO particles by using approaches based on artificial neural network and MARS. J. Therm. Anal. Calorim. (2020). https://doi.org/10.1007/s10973-020-09373-9CrossRef

10.

Khan, W.A.; Pop, I.: Boundary-layer flow of a nanofluid past a stretching sheet. Int. J. Heat Mass Transf. 53, 2477–2483 (2010). https://doi.org/10.1016/j.ijheatmasstransfer.2010.01.032CrossRefMATH

11.

Kuznetsov, A.V.; Nield, D.A.: Natural convective boundary layer flow of a nanofluid past a vertical plate. Int. J. Therm. Sci. 49, 243–247 (2010). https://doi.org/10.1016/j.ijthermalsci.2009.07.015CrossRef

12.

Bachok, N.; Ishak, A.; Pop, I.: The boundary layers of an unsteady stagnation-point flow in a nanofluid. Int. J. Heat Mass Transf. 55, 6499–6505 (2012). https://doi.org/10.1016/j.ijheatmasstransfer.2012.06.050CrossRef

13.

Shafiq, A.; Sindhu, T.N.; Khalique, C.M.: Numerical investigation and sensitivity analysis on bioconvective tangent hyperbolic nanofluid flow towards stretching surface by response surface methodology. Alex. Eng. J. 59(6), 4533–4548 (2020)CrossRef

14.

Rasool,G.; Shafiq, A.: Numerical exploration of the features of thermally enhanced chemically reactive radiative Powell–Eyring nanofluid flow via Darcy medium over non-linearly stretching surface affected by a transverse magnetic field and convective boundary conditions. Appl. Nanosci. 1–18 (2020)

15.

Rasool, G.; Shafiq, A.: Darcy-Forchheimer relation in magnetohydrodynamic Jeffrey nanofluid flow over stretching surface. Discrete Continu. Dyn. Syst. S 14, 2497 (2018)MathSciNetCrossRefMATH

16.

Shafiq, A.; Khalique, C.M.: Lie group analysis of upper convected Maxwell fluid flow along stretching surface. Alex. Eng. J. 59(4), 2533–2541 (2020)CrossRef

17.

Shafiq, A.; Sindhu, T.N.; Hammouch, Z.: Characteristics of homogeneous heterogeneous reaction on flow of Walters’ B liquid under the statistical paradigm. In: International workshop of Mathematical Modelling, Applied Analysis and Computation, Springer, Singapore, pp. 295–311 (2018)

18.

Shafiq, A.; Sindhu, T.N.: Statistical study of hydromagnetic boundary layer flow of Williamson fluid regarding a radiative surface. Results Phys. 7, 3059–3067 (2017)CrossRef

19.

Rana, P.; Dhanai, R.; Kumar, L.: MHD slip flow and heat transfer of Al2O3- water nanofluid over a horizontal shrinking cylinder using Buongiorno’s model: Effect of nanolayer and nanoparticle diameter. Adv. Powder Technol. 28, 1727–1738 (2017)CrossRef

20.

Rasool, G.; Shafiq, A.; Khan, I.; Baleanu, D.; Nisar, K.S.; Shahzadi, G.: Entropy generation and consequences of MHD in Darcy–Forchheimer nanofluid flow bounded by non-linearly stretching surface. Symmetry 12(4), 652 (2020)CrossRef

21.

Ferdows, M.; Shamshuddin, M.; Salawu, S.O.; et al.: Numerical simulation for the steady nanofluid boundary layer flow over a moving plate with suction and heat generation. SN Appl. Sci. 3, 264 (2021). https://doi.org/10.1007/s42452-021-04224-0CrossRef

22.

Khan, U.; Shafiq, A.; Zaib, A.; Baleanu, D.: Hybrid nanofluid on mixed convective radiative flow from an irregular variably thick moving surface with convex and concave effects. Case Stud. Thermal Eng. 21, 100660 (2020)CrossRef

23.

Shafiq, A.; Rasool, G.; Khalique, C.M.: Significance of thermal slip and convective boundary conditions in three dimensional rotating Darcy–Forchheimer nanofluid flow. Symmetry 12(5), 741 (2020)CrossRef

24.

Gul, T.; Kashifullah, B.M.; et al.: Hybrid nanofluid flow within the conical gap between the cone and the surface of a rotating disk. Sci. Rep. 11, 1180 (2021). https://doi.org/10.1038/s41598-020-80750-yCrossRef

25.

Ghulam, R.; Zhang, T.; Chamkha, A.J.; Shafiq, A.; Tlili, I.; Shahzadi, G.: Entropy generation and consequences of binary chemical reaction on MHD Darcy-Forchheimer Williamson nanofluid flow over non-linearly stretching surface. Entropy 22(1), 18 (2020)MathSciNet

26.

Ma, T.; Guo, Z.; Lin, M.; Wang, Q.: Recent trends on nanofluid heat transfer machine learning research applied to renewable energy. Renew. Sustain. Energy Rev. 138, 110494 (2021). https://doi.org/10.1016/j.rser.2020.110494CrossRef

27.

Chu, Y.M.; Khan, U.; Shafiq, A.; Zaib, A.: Numerical simulations of time-dependent micro-rotation blood flow induced by a curved moving surface through conduction of gold particles with non-uniform heat sink/source. Arab. J. Sci. Eng. 46(3), 2413–2427 (2021)CrossRef

28.

Kumar, R.A.; Kavitha, M.; Kumar, P.M.; Seshadri, S.A.: Numerical study of graphene-platinum hybrid nanofluid in microchannel for electronics cooling. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. (2021). https://doi.org/10.1177/0954406220987261

29.

Alqarni, M.S.; Waqas, H.; Imran, M.; Alghamdi, M.; Muhammad, T.: Thermal transport of bio-convection flow of micropolar nanofluid with motile microorganisms and velocity slip effects. Phys. Scr. 96, 015220 (2021)CrossRef

30.

Lee, L.L.: Boundary layer over a thin needle. Phys. Fluids 10, 1820–1822 (1967). https://doi.org/10.1063/1.1762194CrossRef

31.

Ahmad, S.; Arifin, N.M.; Nazar, R.; Pop, I.: Mixed convection boundary layer flow along vertical thin needles: assisting and opposing flows. Int. Commun. Heat Mass Trans. 35, 157–162 (2008). https://doi.org/10.1016/j.icheatmasstransfer.2007.07.005CrossRefMATH

32.

Grosan, T.; Pop, I.: Forced convection boundary layer flow past non isothermal thin needles in nanofluids. J. Heat Trans. 133, 054503 (2011). https://doi.org/10.1115/1.4003059CrossRef

33.

Ahmad, R.; Mustafa, M.S.: Hina, Buongiorno’s model for fluid flow around a moving thin needle in a flowing nanofluid: a numerical study. Chin. J. Phys. 55, 1264–1274 (2017). https://doi.org/10.1016/j.cjph.2017.07.004CrossRef

34.

Salleh, S.N.A.; Bachok, N.; Arifin, N.M.; Ali, F.M.: Numerical analysis of boundary layer flow adjacent to a thin needle in nanofluid with the presence of heat source and chemical reaction. Symmetry 11, 543 (2019). https://doi.org/10.3390/sym11040543CrossRefMATH

35.

Salleh, S.N.A.; Bachok, N.; Arifin, N.M.; Ali, F.M.: A stability analysis of solutions on boundary layer flow past a moving thin needle in a nanofluid with slip effect. ASM Sci. J. 12, 60–70 (2019)

36.

Waini, I.; Ishak, A.; Pop, I.: On the stability of the flow and heat transfer over a moving thin needle with prescribed surface heat flux. Chin. J. Phys. 60, 651–658 (2019). https://doi.org/10.1016/j.cjph.2019.06.008MathSciNetCrossRef

37.

Salleh, S.N.A.; Bachok, N.; Arifin, N.M.; Ali, F.M.: Magnetic field effect on nanofluid flow and heat transfer past a moving horizontal thin needle with stability analysis. In: Embracing Mathematical Diversity, UPM Press, Malaysia, pp. 182–193 (2019)

38.

Mortimer, R.G.; Eyring, H.: Elementary transition state theory of the Soret and Dufour effects. Proc. Natl. Acad. Sci. USA 77, 1728–1731 (1980)CrossRef

39.

Benano-Melly, L.B.; Caltagirone, J.P.; Faissat, B.; Montel, F.; Costeseque, P.: Modelling Soret coefficient measurement experiments in porous media considering thermal and solutal convection. Int. J. Heat Mass Transf. 44, 1285–1297 (2001). https://doi.org/10.1016/S0017-9310(00)00183-6CrossRefMATH

40.

Postelnicu, A.: Influence of chemical reaction on heat and mass transfer by natural convection from vertical surfaces in porous media considering Soret and Dufour effects. Heat Mass Transf. 43, 595–602 (2007). https://doi.org/10.1007/s00231-006-0132-8CrossRef

41.

Postelnicu, A.: Heat and mass transfer by natural convection at a stagnation point in a porous medium considering Soret and Dufour effects. Heat Mass Transf. 46, 831–840 (2010). https://doi.org/10.1007/s00231-010-0633-3CrossRef

42.

Rasool, G.; Shafiq, A.; Baleanu, D.: Consequences of Soret-Dufour effects, thermal radiation, and binary chemical reaction on Darcy Forchheimer flow of nanofluids. Symmetry 12(9), 1421 (2020)CrossRef

43.

Shojaei, A.; Amiri, A.J.; Ardahaie, S.S.; Hosseinzadeh, K.; Ganji, D.D.: Hydrothermal analysis of Non-Newtonian second grade fluid flow on radiative stretching cylinder with Soret and Dufour effects. Case Stud. Therm. Eng. 13, 100384 (2019). https://doi.org/10.1016/j.csite.2018.100384CrossRef

44.

Sardar, H.; Ahmad, L.; Khan, M.; Alshomrani, A.S.: Investigation of mixed convection flow of Carreau nanofluid over a wedge in the presence of Soret and Dufour effects. Int. J. Heat and Mass Transf. 137, 809–822 (2019). https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.132CrossRef

45.

Ariana, M.A.; Vaferi, B.; Karimi, G.: Prediction of thermal conductivity of alumina water-based nanofluids by artificial neural networks. Powder Technol. 278, 1–10 (2015)CrossRef

46.

Çolak, A.B.: A novel comparative analysis between the experimental and numeric methods on viscosity of zirconium oxide nanofluid: developing optimal artificial neural network and new mathematical model. Powder Technol. 381, 338–351 (2021)CrossRef

47.

Feng, Q.; Zhang, J.; Zhang, X.; Wen, S.: Proximate analysis based prediction of gross calorific value of coals: a comparison of support vector machine, alternating conditional expectation and artificial neural network. Fuel Process. Technol. 129, 120–129 (2015)CrossRef

48.

Bonakdari, H.; Zaji, A.H.: Open channel junction velocity prediction by using a hybridself-neuron adjustable artificial neural network. Flow Meas. Instrum. 49, 46–51 (2016)CrossRef

49.

Çolak, A.B.: An experimental study on the comparative analysis of the effect of the number of data on the error rates of artificial neural networks. Int. J. Energy Res. 45(1), 478–500 (2021)CrossRef

50.

Esmaeilzadeh, F.; Teja, A.S.; Bakhtyari, A.: The thermal conductivity, viscosity, andcloud points of bentonite nanofluids with n-pentadecane as the base fluid. J. Mol. Liq. 300, 112307 (2020)CrossRef

51.

Barati-Harooni, A.; Najafi-Marghmaleki, A.: An accurate RBF-NN model for estimation of viscosity of nanofluids. J. Mol. Liq. 224, 580–588 (2016)CrossRef

52.

Rostamian, S.H.; Biglari, M.; Saedodin, S.; Esfe, M.H.: An inspection of thermal conductivity of CuO-SWCNTs hybrid nanofluid versus temperature and concentration using experimental data: ANN modeling and new correlation. J. Mol. Liq. 231, 364–369 (2017)CrossRef

53.

Ali, A.; Abdulrahman, A.; Garg, S.; Maqsood, K.; Murshid, G.: Application of artificial neural networks (ANN) for vapor-liquid-solid equilibrium prediction for CH4–CO2 binary mixture. Greenh. Gases 9, 67–78 (2019)CrossRef

54.

Çolak, A.B.: Experimental study for thermal conductivity of water-based zirconium oxide nanofluid: developing optimal artificial neural network and proposing new correlation. Int. J. Energy Res. 45(2), 2912–2930 (2020)CrossRef

55.

Abdul Kareem, F.A.; Shariff, A.M.; Ullah, S.; Garg, S.; Dreisbach, F.; Keong, L.K.; Mellon, N.: Experimental and neural network modeling of partial uptake for a carbon dioxide/methane/water ternary mixture on 13X zeolite. Energy Technol. 5, 1373–1391 (2017)CrossRef

56.

Vafaei, M.; Afrand, M.; Sina, N.; Kalbasi, R.; Sourani, F.; Teimouri, H.: Evaluation of thermal conductivity of MgO-MWCNTs/EG hybrid nanofluids based on experimental data by selecting optimal artificial neural networks. Physica E 85, 90–96 (2017)CrossRef

57.

Akhgar, A.; et al.: Developing dissimilar artificial neural networks (ANNs) to prediction the thermal conductivity of MWCNT-TiO2/water-ethylene glycolhybrid nanofluid. Powder Technol. 355, 602–610 (2019)CrossRef

58.

Çolak, A.B.: Developing optimal artificial neural network (ANN) to predict the specific heat of water based yttrium oxide (Y2O3) nanofluid according to the experimental data and proposing new correlation. Heat Transf. Res. 51(17), 1565–1586 (2020). https://doi.org/10.1615/HeatTransRes.2020034724CrossRef

59.

Güzel, T.; Çolak, A.B.: Artificial intelligence approach on predicting current values of polymer interface Schottky diode based on temperature and voltage: An experimental study. Superlattices Microstruct. 153, 106864 (2021)CrossRef

Titel: Modeling of Soret and Dufour’s Convective Heat Transfer in Nanofluid Flow Through a Moving Needle with Artificial Neural Network
verfasst von: Anum Shafiq
Andaç Batur Çolak
Tabassum Naz Sindhu
Publikationsdatum: 23.06.2022
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 3/2023
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-022-06945-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2023

Effect of the Biomimetic Spine-Covered Protrusions (BSCPs) Height and Arrangement on SUBOFF Bare Hull Model Drag

Toward the Targeted Material Removal with Optimized Surface Finish During EDM for the Repair Applications in Dies and Molds

Predictive Modeling of Surface Roughness and Feed Force in Al-50wt% Si Alloy Milling Based on Response Surface Method and Various Optimal Algorithms

Optimizing the Performance of Neural Network for Bladder Cancer Prediction and Diagnosis Using Intelligent Firefly

Optimizing the Effect of Ignition and Combustion on Carbon Oxidation Using Pulverized Fuel Burner

Optimisation of Preventive Maintenance Regime Based on Failure Mode System Modelling Considering Reliability

Premium Partner

Marktübersichten