Skip to main content
main-content

Tipp

Weitere Artikel dieser Ausgabe durch Wischen aufrufen

Erschienen in: European Journal of Wood and Wood Products 5/2021

16.04.2021 | Original Article

Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: influence of the age and stand density

verfasst von: Antolino Gallego, María A. Ripoll, Cristian Timbolmas, Francisco Rescalvo, Elisabet Suarez, Ignacio Valverde, María Rodríguez, Francisco B. Navarro, Esther Merlo

Erschienen in: European Journal of Wood and Wood Products | Ausgabe 5/2021

Einloggen, um Zugang zu erhalten
share
TEILEN

Abstract

The poplar wood industry chain from planted forests takes a strategic position for the creation of a competitive, profitable, and highly technological bioeconomy in the world. Niche sectors such as buildings can find in poplar wood an effective ally to reduce its carbon footprint and ecological backpack. For the poplar wood, it is important to understand the huge significance of the proper silvicultural management of a plantation and to characterize the raw material. In this context, this paper carries out such characterization for the particular case of young plantations of the clone I-214 (Populus × euroamericana (Dode) Guinier), commonly used for its high growth rate. The acoustic non-destructive characterization of poplar wood is carried out from standing trees, logs and sawn timber and then compared with the one obtained through destructive mechanical tests. The study shows that growth parameters are highly affected by the age and moderately affected by stand density, while mechanical properties are strongly affected by the age and less affected by the stand density. The study also shows high values of the linear regression coefficients between the mechanical properties obtained on standing trees, logs, and sawn timber using non-destructive and destructive methods (R2 = 0.7 for all three cases), greater than those obtained for other species. A good linear fitting was obtained between the tree and log velocities (R2 = 0.76) and between the tree and log elastic moduli (R2 = 0.85). Consequently, the evaluation of the mechanical properties employing the optimized acoustic protocol provides a reliable characterization for the poplar wood.

Sie möchten Zugang zu diesem Inhalt erhalten? Dann informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 69.000 Bücher
  • über 500 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 58.000 Bücher
  • über 300 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Testen Sie jetzt 15 Tage kostenlos.

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 50.000 Bücher
  • über 380 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




Testen Sie jetzt 15 Tage kostenlos.

Literatur
Zurück zum Zitat Alemdag IS (1978) An analytical look at the log volume formulas. Forest Management Institute, Canadian Forestry Service Alemdag IS (1978) An analytical look at the log volume formulas. Forest Management Institute, Canadian Forestry Service
Zurück zum Zitat Amateis RL, Burkhart HE (2015) Use of the Fakopp Treesonic acoustic device to estimate wood quality characteristics in loblolly pine trees planted at different densities. In: Proceedings of the 17th biennial southern silvicultural research conference. U.S. Department of Agriculture, Forest Service, Southern Research Station, Asheville, NC, USA, p 5 Amateis RL, Burkhart HE (2015) Use of the Fakopp Treesonic acoustic device to estimate wood quality characteristics in loblolly pine trees planted at different densities. In: Proceedings of the 17th biennial southern silvicultural research conference. U.S. Department of Agriculture, Forest Service, Southern Research Station, Asheville, NC, USA, p 5
Zurück zum Zitat Aydin S, Yardimci MY, Ramyar K (2007) Mechanical properties of four timber species commonly used in Turkey. Turkish J Eng Env Sci 31:19–27 Aydin S, Yardimci MY, Ramyar K (2007) Mechanical properties of four timber species commonly used in Turkey. Turkish J Eng Env Sci 31:19–27
Zurück zum Zitat Beaudoin M, Hernández RE, Koubaa A, Poliquin J (1992) Interclonal, intraclonal and within-tree variation in wood density of poplar hybrid clones. Wood Fiber Sci 24:147–153 Beaudoin M, Hernández RE, Koubaa A, Poliquin J (1992) Interclonal, intraclonal and within-tree variation in wood density of poplar hybrid clones. Wood Fiber Sci 24:147–153
Zurück zum Zitat Bendtsen BA, Senft J (1986) Mechanical and anatomical properties in individual growth rings of plantation-grown eastern cottonwood and loblolly pine. Wood Fiber Sci 18(1):23–38 Bendtsen BA, Senft J (1986) Mechanical and anatomical properties in individual growth rings of plantation-grown eastern cottonwood and loblolly pine. Wood Fiber Sci 18(1):23–38
Zurück zum Zitat Berthelot A, Reuling D, Robert G, Bouvet A, Lanvin JD, Legrand G, Moreau J, Denaud L, Pillassa E (2013) Qualités du bois des nouveaux cultivars de peuplier (Wood qualities of new poplar cultivars). Forêt Privée Française, FCBA Institut Technologique, Arts et Métiers ParisTech Berthelot A, Reuling D, Robert G, Bouvet A, Lanvin JD, Legrand G, Moreau J, Denaud L, Pillassa E (2013) Qualités du bois des nouveaux cultivars de peuplier (Wood qualities of new poplar cultivars). Forêt Privée Française, FCBA Institut Technologique, Arts et Métiers ParisTech
Zurück zum Zitat Casado M, Acuña L, Vecilla D, Relea E, Basterra A, Ramon G, Lopez G (2010) The influence of size in predicting the elastic modulus of Populus x euramericana timber using vibration techniques. In: Cruz (ed) Structures and architecture. Taylor & Francis Group, London, pp 2025–2032. ISBN 978-0-415-49249-2 Casado M, Acuña L, Vecilla D, Relea E, Basterra A, Ramon G, Lopez G (2010) The influence of size in predicting the elastic modulus of Populus x euramericana timber using vibration techniques. In: Cruz (ed) Structures and architecture. Taylor & Francis Group, London, pp 2025–2032. ISBN 978-0-415-49249-2
Zurück zum Zitat Chauhan SS, Walker JCF (2006) Variations in acoustic velocity and density with age, and their interrelationships in radiata pine. Forest Ecol Manag 229:388–394 CrossRef Chauhan SS, Walker JCF (2006) Variations in acoustic velocity and density with age, and their interrelationships in radiata pine. Forest Ecol Manag 229:388–394 CrossRef
Zurück zum Zitat Cheng F, Hu Y (2011) Reliability analysis of timber structure design of poplar lumber with nondestructive testing methods. BioResources 6(3):3188–3198 Cheng F, Hu Y (2011) Reliability analysis of timber structure design of poplar lumber with nondestructive testing methods. BioResources 6(3):3188–3198
Zurück zum Zitat Forêt Priveé Française (2013) FCBA Institut Technologique, Arts et Métiers ParisTech. Wood qualities of new poplar cultivars. Forêt-entreprise 212 septiembre 2013, France Forêt Priveé Française (2013) FCBA Institut Technologique, Arts et Métiers ParisTech. Wood qualities of new poplar cultivars. Forêt-entreprise 212 septiembre 2013, France
Zurück zum Zitat Hernández RE, Koubaa A, Beaudoin M, Fortin Y (1998) Selected mechanical properties of fast-growing poplar hybrid clones. Wood Fiber Sci 30(2):138–147 Hernández RE, Koubaa A, Beaudoin M, Fortin Y (1998) Selected mechanical properties of fast-growing poplar hybrid clones. Wood Fiber Sci 30(2):138–147
Zurück zum Zitat Huda ASMA, Koubaa A, Cloutier A, Hernández RE, Fortin Y (2014) Variation of the physical and mechanical properties of hybrid poplar clones. BioResources 9(1):1456–1471 CrossRef Huda ASMA, Koubaa A, Cloutier A, Hernández RE, Fortin Y (2014) Variation of the physical and mechanical properties of hybrid poplar clones. BioResources 9(1):1456–1471 CrossRef
Zurück zum Zitat Ilic J (2001) Relationship among the dynamic and static elastic properties of air-dry Eucalyptus delegatensis R. Baker Holz Roh- Werkst 59:169–175 CrossRef Ilic J (2001) Relationship among the dynamic and static elastic properties of air-dry Eucalyptus delegatensis R. Baker Holz Roh- Werkst 59:169–175 CrossRef
Zurück zum Zitat Isebrands I, Richardson J (2014) Poplar and willows: trees for society and the environment. CAB International and FAO (Food and Agriculture Organization of the United Nations, Rome, Italy Isebrands I, Richardson J (2014) Poplar and willows: trees for society and the environment. CAB International and FAO (Food and Agriculture Organization of the United Nations, Rome, Italy
Zurück zum Zitat Kollert W, Lebedys A (2018) Poplar cultivation in Europa and Spain. III Poplar Symposium, Valladolid Kollert W, Lebedys A (2018) Poplar cultivation in Europa and Spain. III Poplar Symposium, Valladolid
Zurück zum Zitat Madhoushi M, Daneshvar S (2016) Predicting the static modulus of elasticity in eastern cottonwood ( Populus deltoides) using stress wave non-destructive testing in standing trees. Eur J Wood Prod 74(6):885–892 CrossRef Madhoushi M, Daneshvar S (2016) Predicting the static modulus of elasticity in eastern cottonwood ( Populus deltoides) using stress wave non-destructive testing in standing trees. Eur J Wood Prod 74(6):885–892 CrossRef
Zurück zum Zitat Moore J, Lyon A, Searles G, Lehneke S, Ridley-Ellis D (2013) Within- and between-stand variation in selected properties of Sitka spruce sawn timber in the UK: implications for segregation and grade recovery. Ann For Sci 70:403–415 CrossRef Moore J, Lyon A, Searles G, Lehneke S, Ridley-Ellis D (2013) Within- and between-stand variation in selected properties of Sitka spruce sawn timber in the UK: implications for segregation and grade recovery. Ann For Sci 70:403–415 CrossRef
Zurück zum Zitat Rais A, Pretzsch H, van de Kuilen JWG (2014) Roundwood pre-grading with longitudinal acoustic waves for production of structural boards. Eur J Wood Prod 72:87–98 CrossRef Rais A, Pretzsch H, van de Kuilen JWG (2014) Roundwood pre-grading with longitudinal acoustic waves for production of structural boards. Eur J Wood Prod 72:87–98 CrossRef
Zurück zum Zitat Ridley-Ellis D, Stapel P, Baño V (2016) Strength grading of sawn timber in Europe: an explanation for engineers and researchers. Eur J Wood Prod 74:291–306 CrossRef Ridley-Ellis D, Stapel P, Baño V (2016) Strength grading of sawn timber in Europe: an explanation for engineers and researchers. Eur J Wood Prod 74:291–306 CrossRef
Zurück zum Zitat Ross RJ, Hunt MO (2000) Stress wave timing nondestructive evaluation tools for inspecting historic structures. A guide for use and interpretation. Gen. Tech. Rep. FPL-GTR-119. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, USA Ross RJ, Hunt MO (2000) Stress wave timing nondestructive evaluation tools for inspecting historic structures. A guide for use and interpretation. Gen. Tech. Rep. FPL-GTR-119. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, USA
Zurück zum Zitat Santaclara O, Merlo E (2011) Acoustic segregation of Pinus pinaster logs for structural lumber pro-duction according to strength classes. In: Proceedings of the 17th international nondestructive testing and evaluation of wood symposium. Sopron, Hungary. p 755 Santaclara O, Merlo E (2011) Acoustic segregation of Pinus pinaster logs for structural lumber pro-duction according to strength classes. In: Proceedings of the 17th international nondestructive testing and evaluation of wood symposium. Sopron, Hungary. p 755
Zurück zum Zitat Simic K, Gendvilas V, O’Reilly C, Harte AM (2019) Predicting structural timber grade determining properties using acoustic and density measurements on young Sitka spruce trees and logs. Holzforschung 73:139–149 CrossRef Simic K, Gendvilas V, O’Reilly C, Harte AM (2019) Predicting structural timber grade determining properties using acoustic and density measurements on young Sitka spruce trees and logs. Holzforschung 73:139–149 CrossRef
Zurück zum Zitat Smulski SJ (1991) Relationship of stress wave- and static bending-determined properties of four northeastern hardwoods. Wood Fiber Sci 23:44–57 Smulski SJ (1991) Relationship of stress wave- and static bending-determined properties of four northeastern hardwoods. Wood Fiber Sci 23:44–57
Zurück zum Zitat Van Acker J, Defoirdt N, Van del Bulcke J (2016) Enhanced potential of poplar and willow for engineered wood products. In: Second conference on engineered wood products based on poplar/willow Wood (CEPPW2) Van Acker J, Defoirdt N, Van del Bulcke J (2016) Enhanced potential of poplar and willow for engineered wood products. In: Second conference on engineered wood products based on poplar/willow Wood (CEPPW2)
Zurück zum Zitat Wang X, Ross RJ, Green DW, Brashaw B, Englund K, Wolcott M (2004) Stress wave sorting of red maple logs for structural quality. Wood Sci Technol 37:531–537 CrossRef Wang X, Ross RJ, Green DW, Brashaw B, Englund K, Wolcott M (2004) Stress wave sorting of red maple logs for structural quality. Wood Sci Technol 37:531–537 CrossRef
Zurück zum Zitat Wang X, Carter P, Ross RJ, Brashaw BK (2007) Acoustic assessment of wood quality of raw materials: a path to increased profitability. For Prod J 57:6–14 Wang X, Carter P, Ross RJ, Brashaw BK (2007) Acoustic assessment of wood quality of raw materials: a path to increased profitability. For Prod J 57:6–14
Zurück zum Zitat Wessels BC, Froneman GM (2015) The potential for improving the stifness of young South African grown Pinus radiata lumber by using high planting densities. Pro Lingo 11:58–64 Wessels BC, Froneman GM (2015) The potential for improving the stifness of young South African grown Pinus radiata lumber by using high planting densities. Pro Lingo 11:58–64
Zurück zum Zitat Yang JL, Ilic J, Wardlaw T (2002) Relationships between static and dynamic modulus of elasticity for a mixture of clear and decayed eucalypt wood. Aust For 66(3):193–196 CrossRef Yang JL, Ilic J, Wardlaw T (2002) Relationships between static and dynamic modulus of elasticity for a mixture of clear and decayed eucalypt wood. Aust For 66(3):193–196 CrossRef
Zurück zum Zitat Yu Q, Zhang SY, Pliura A, MacKay J, Bousquet J, Perinet P (2008) Variation in mechanical properties of selected young poplar hybrid crosses. For Sci 54(3):255–259 Yu Q, Zhang SY, Pliura A, MacKay J, Bousquet J, Perinet P (2008) Variation in mechanical properties of selected young poplar hybrid crosses. For Sci 54(3):255–259
Zurück zum Zitat Zhang SY (1995) Effecto of growth rate on wood specific gravity and selected mechanical properties in individual species from distinct wood categories. Wood Sci Technol 29:451–465 CrossRef Zhang SY (1995) Effecto of growth rate on wood specific gravity and selected mechanical properties in individual species from distinct wood categories. Wood Sci Technol 29:451–465 CrossRef
Zurück zum Zitat Zhang SY, Chauret G, Ren HQ, Desjardins R (2002) Impact of plantation black spruce initial spacing on lumber grade yield, bending properties and MSR yield. Wood Fiber Sci 34:460–475 Zhang SY, Chauret G, Ren HQ, Desjardins R (2002) Impact of plantation black spruce initial spacing on lumber grade yield, bending properties and MSR yield. Wood Fiber Sci 34:460–475
Zurück zum Zitat Zobel BJ, Buijtenen JP (1989) Wood variation—its cause and control. Springer, Berlin CrossRef Zobel BJ, Buijtenen JP (1989) Wood variation—its cause and control. Springer, Berlin CrossRef
Metadaten
Titel
Modulus of elasticity of I-214 young poplar wood from standing trees to sawn timber: influence of the age and stand density
verfasst von
Antolino Gallego
María A. Ripoll
Cristian Timbolmas
Francisco Rescalvo
Elisabet Suarez
Ignacio Valverde
María Rodríguez
Francisco B. Navarro
Esther Merlo
Publikationsdatum
16.04.2021
Verlag
Springer Berlin Heidelberg
Erschienen in
European Journal of Wood and Wood Products / Ausgabe 5/2021
Print ISSN: 0018-3768
Elektronische ISSN: 1436-736X
DOI
https://doi.org/10.1007/s00107-021-01675-5