nach oben

Journal of Materials Engineering and Performance

Erschienen in:

06.09.2017

New X-Ray Technique to Characterize Nanoscale Precipitates in Aged Aluminum Alloys

verfasst von: V. D. Sitdikov, M. Yu. Murashkin, R. Z. Valiev

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 10/2017

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This paper puts forward a new technique for measurement of x-ray patterns, which enables to solve the problem of identification and determination of precipitates (nanoscale phases) in metallic alloys of the matrix type. The minimum detection limit of precipitates in the matrix of the base material provided by this technique constitutes as little as 1%. The identification of precipitates in x-ray patterns and their analysis are implemented through a transmission mode with a larger radiation area, longer holding time and higher diffractometer resolution as compared to the conventional reflection mode. The presented technique has been successfully employed to identify and quantitatively describe precipitates formed in the Al alloy of the Al-Mg-Si system as a result of artificial aging. For the first time, the x-ray phase analysis has been used to identify and measure precipitates formed during the alloy artificial aging.

Vorheriger Artikel Corrosion Behavior of Metal Active Gas Welded Joints of a High-Strength Steel for Automotive Application

Nächster Artikel Evaluation of Microstructure, Mechanical Properties and Corrosion Resistance of Friction Stir-Welded Aluminum and Magnesium Dissimilar Alloys

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

R. Guinebretière, X-Ray Diffraction by Polycrystalline Materials, ISTE Ltd, London, 2013

D.L. Bish, M. Plötze, and G.E. Christidis, X-ray Powder Diffraction with Emphasis on Qualitative and Quantitative Analysis in Industrial Mineralogy, Advances in the Characterization of Industrial Minerals, E. Christidis, Ed., The Mineralogical Society of Great Britain and Ireland, Twickenham, 2011, p 35–76CrossRef

L.S. Zevin, G. Kimmel, and I. Mureinik, Quantitative X-Ray Diffractometry, Springer, New York, 1995CrossRef

D.S. MacKenzie and G.E. Totten, Analytical Characterization of Aluminum, Steel, and Superalloys, Taylor and Francis, Broken Sound Parkway Northwest, 2005

S. Zhou, K. Potzger, G. Talut, J. von Borany, W. Skorupa, M. Helm, and J. Fassbender, Using X-Ray Diffraction to Identify Precipitates in Transition Metal Doped Semiconductors, J. Appl. Phys., 2008, 103(7), p 07D530CrossRef

H.S. Choi and J. Choi, Precipitation in Inconel 718 Alloy, J. Kor. Nucl. Soc., 1972, 4(3), p 203–213

M.D. David, R.D. Foley, J.A. Griffin, and C. Monroe, Validation of High Strength Cast Al-Zn-Mg-Cu Aluminum for Use in Manufacturing Process Design, 2 World Congress on Integrated Computational Materials Engineering, M. Li, C. Campbell, K. Thornton, E. Holm, and P. Gumbsch, Ed., Wiley, New Jersey, 2013, p 117CrossRef

V.D. Sitdikov, P.S. Chizhov, M.Y. Murashkin, A.A. Goidenko, and R.Z. Valiev, X-Ray Studies of Dynamic Aging in an Aluminum Alloy Subjected to Severe Plastic Deformation, Mater. Char., 2015, 110, p 222–227CrossRef

P. Donnadieu, E. Carsughi, A. Redjaimia, C. Diot, and G. Lapasset, Nanoscale Hardening Precipitiation in AlMgSi Alloys, A Transmission Electron Microscopy and Small-Angle Neutron Scattering Study, J. Appl. Cryst., 1998, 31(2), p 212–222CrossRef

10.

D. Bardel, M. Perez, D. Nelias, A. Deschamps, C.R. Hutchinson, D. Maisonnette, T. Chaise, J. Garnier, and F. Bourlier, Coupled Precipitation and Yield Strength Modelling for Non-isothermal Treatments of a 6061 Aluminium Alloy, Acta Mater., 2014, 62(1), p 129–140CrossRef

11.

E.P. Bertin, Principles and Practice of X-Ray Spectrometric Analysis, Springer, New York, 1978

12.

H.M. Rietveld, A Profile Refinement Method for Nuclear and Magnetic Structures, J Appl. Cryst., 1969, 2, p 65–71CrossRef

13.

Integrated X-Ray Powder Diffraction Software PDXL, Rigaku J., 2010, 26(1), p 23–27

14.

E.J. Sonneveld and J.W. Visser, Automatic Collection of Powder Data from Photographs, J. Appl. Cryst., 1975, 8, p 1–7CrossRef

15.

P. Cannon and E.T. Conlin, Magnesium Compounds—New Dense Phase, Science, 1964, 145(3631), p 487–489CrossRef

16.

S. Ji, W. Yang, F. Gao, D. Watson, and Z. Fan, Effect of Iron on the Microstructure and Mechanical Property of Al-Mg-Si-Mn and Al-Mg-Si Die Cast Alloys, Mater Sci. Eng., 2013, A564, p 130–139CrossRef

17.

Y. Birol, Optimization of Homogenization for a Low Alloyed AlMgSi Alloy, Mater. Char., 2013, 80, p 69–75CrossRef

18.

G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper, The Precipitation Sequence in Al-Mg-Si Alloys, Acta Mater., 1998, 46(11), p 3893–3904CrossRef

19.

R. Vissers, M.A. van Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara, and S.J. Andersen, The Crystal Structure of the β′ Phase in Al-Mg-Si Alloys, Acta Mater., 2007, 55(11), p 3815–3823CrossRef

20.

M.A. van Huis, J.H. Chen, M.H.F. Sluiter, and H.W. Zandbergen, Phase Stability and Structural Features of Matrix-Embedded Hardening Precipitates in Al-Mg-Si Alloys in the Early Stages of Evolution, Acta Mater., 2007, 55(6), p 2183–2199CrossRef

21.

Y. Qiu, Y. Kong, S. Xiao, and Y. Du, Mechanical Properties of β″ Precipitates Containing Al and/or Cu in Age Hardening Al Alloys, J. Mater. Res., 2016, 31(5), p 580–588CrossRef

22.

M.H. Jacobs, The Structure of the Metastable Precipitates Formed During Ageing of an Al-Mg-Si Alloy, Phil. Mag., 1972, 26(1), p 1–13CrossRef

23.

H.W. Zandbergen, S.J. Andersen, and J. Jansen, Structure Determination of Mg5Si6 Particles in Al by Dynamic Electron Diffraction Studies, Science, 1997, 277(5330), p 1221–1225CrossRef

24.

H.S. Hasting, A.G. Frøseth, S.J. Andersen, R. Vissers, J.C. Walmsley, C.D. Marioara, F. Danoix, W. Lefebvre, and R. Holmestad, Composition of β″ Precipitates in Al-Mg-Si Alloys by Atom Probe Tomography and First Principles Calculations, Journal of Applied Physics, 2009, 106, p 123527CrossRef

25.

C.D. Marioara, S.J. Andersen, J. Jansen, and H.W. Zandbergen, Atomic Model for GP-Zones in a 6082 Al-Mg-Si System, Acta mater., 2001, 49, p 321–328CrossRef

26.

M.W. Zandbergen, A. Cerezo, and G.D.W. Smith, Study of Precipitation in Al-Mg-Si Alloys by Atom Probe Tomography II. Influence of Cu additions, Acta Mater., 2015, 101, p 149–158CrossRef

27.

A. Cuniberti, A. Tolley, M.V. Castro Riglos, and R. Giovachini, Influence of Natural Aging on the Precipitation Hardening of an AlMgSi Alloy, Mater Sci. Eng., 2010, A527, p 5307–5311CrossRef

28.

Y. Ji, F. Guo, and Y. Pan, Microstructural Characteristics and Paint-Bake Response of Al-Mg-Si-Cu Alloy, Trans. Nonferrous Met. Soc. China, 2008, 18(1), p 126–131CrossRef

29.

R.S. Yassar, D.P. Field, and H. Weiland, Transmission Electron Microscopy and Differential Scanning Calorimetry Studies on the Precipitation Sequence in an Al-Mg-Si Alloy AA6022, J. Mater. Res., 2005, 20(10), p 2705–2711CrossRef

30.

B. Milkereit, N. Wanderka, C. Schick, and O. Kessler, Continuous Cooling Precipitation Diagrams of Al-Mg-Si Alloys, Mater. Sci. Eng., 2012, A550, p 87–96CrossRef

31.

C.D. Marioara, S.J. Andersen, H.W. Zandbergen, and R. Holmestad, The Influence of Alloy Composition on Precipitates of the Al-Mg-Si System, Metall. Mater. Trans., 2005, 36A, p 691–702

32.

S. Esmaeili, X. Wang, D.J. Lloyd, and W.J. Poole, On the Precipitation-Hardening Behavior of the Al-Mg-Si-Cu Alloy AA6111, Metall. Mater. Trans., 2003, 34A(3), p 751–763

33.

M.W. Zandbergen, Q. Xu, A. Cerezo, and G.D.W. Smith, Data Analysis and Other Considerations Concerning the Study of Precipitation in Al-Mg-Si Alloys by Atom Probe Tomography, Data Brief, 2015, 5, p 626–641CrossRef

34.

C.S.T. Chang, F.D. Geuser, and J. Banhart, In-Situ Characterisation of β″ Precipitation in an Al-Mg-Si Alloy by Anisotropic Small-Angle Neutron Scattering on a Single Crystal, J. Appl. Cryst., 2015, 48(2), p 455–463CrossRef

Titel: New X-Ray Technique to Characterize Nanoscale Precipitates in Aged Aluminum Alloys
verfasst von: V. D. Sitdikov
M. Yu. Murashkin
R. Z. Valiev
Publikationsdatum: 06.09.2017
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 10/2017
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-017-2915-0

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 10/2017

Investigations on the Influence of Liquid-Assisted Laser Ablation of NiTi Rotating Target to Improve the Formation Efficiency of Spherical Alloyed NiTi Nanoparticles

Effect of Sleeve Plunge Depth on Microstructure and Mechanical Properties of Refill Friction Stir Spot Welding of 2198 Aluminum Alloy

Corrosion Behavior of Cu40Zn in Sulfide-Polluted 3.5% NaCl Solution

Correlation Between Microstructure and Corrosion Resistance of Magnesium Alloys Prepared by High Strain Rate Rolling

Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique

Tribological Behavior of Mg97Zn1Y2 Alloy at Elevated Temperatures of 50-200 °C

Premium Partner

Marktübersichten