nach oben

Journal of Materials Engineering and Performance

Erschienen in:

18.09.2015

Nondestructive Evaluation of Friction Stir-Welded Aluminum Alloy to Coated Steel Sheet Lap Joint

verfasst von: H. Das, A. Kumar, K. V. Rajkumar, T. Saravanan, T. Jayakumar, Tapan Kumar Pal

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 11/2015

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Dissimilar lap joints of aluminum sheet (AA 6061) of 2 mm thickness and zinc-coated steel sheet of 1 mm thickness were produced by friction stir welding with different combinations of rotational speed and travel speed. Ultrasonic C- and B-scanning, and radiography have been used in a complementary manner for detection of volumetric (cavity and flash) and planar (de bond) defects as the defects are in micron level. Advanced ultrasonic C-scanning did not provide any idea about the defects, whereas B-scanning cross-sectional image showed an exclusive overview of the micron-level defects. A digital x-ray radiography methodology is proposed for quality assessment of the dissimilar welds which provide three-fold increase in signal-to-noise ratio with improved defect detection sensitivity. The present study clearly shows that the weld tool rotational speed and travel speed have a decisive role on the quality of the joints obtained by the friction stir welding process. The suitability of the proposed NDE techniques to evaluate the joint integrity of dissimilar FSW joints is thus established.

Vorheriger Artikel Electrolytic Synthesis and Characterization of Electrocatalytic Ni-W Alloy

Nächster Artikel Comparative Studies on Al-Based Composite Powder Reinforced with Nano Garnet and Multi-wall Carbon Nanotubes

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

T. Deb Roy and H.K.D.H. Bhadeshia, Friction Stir Welding of Dissimilar Alloys—A Perspective, Sci. Technol. Weld. Joining, 2010, 15(4), p 266–270CrossRef

T.A. Barnes and I.R. Pashby, Joining Techniques for Aluminium Spaceframes Used in Automobiles: Part I—Solid and Liquid Phase Welding, J. Mater. Process. Technol., 2000, 99(1), p 62–71CrossRef

S.H.C. Park, Y.S. Sato, and H. Kokawa, Proc. 7th Int. Symp., Kobe, Japan, 2001, p. 639, JWS.

D. Brandon and W.D. Kaplan, Chichester, 1997, Wiley, p. 11.

A. Elrefaey, M. Gouda, M. Takahashi, and K. Ikeuchi, Characterization of Aluminium/Steel Lap Joint by Friction Stir Welding, J. Mater. Eng. Perform., 2005, 14, p 10–17CrossRef

K. Kumar and S.V. Kailas, The Role of Friction Stir Welding Tool on Material Flow and Weld Formation, Mater. Sci. Eng. A, 2008, 485, p 367–374CrossRef

Z.W. Chen and R. Maginness, Proc. 5th Int. Symp., 2004, friction stir welding, Metz, France

M. Guerra, C. Schmidt, J.C. McClure, L.E. Murr, and A.C. Nunes, Flow Pattern During Friction Stir Welding, J. Mater. Charac., 2003, 49, p 95–101CrossRef

Y.S. Sato, F. Yamashita, Y. Sugiura, S.H.C. Park, and H. Kokawa, FIB-Assisted TEM Study of an Oxide Array in the Root of a Friction Stir Welded Aluminium Alloy, Scripta Mater., 2004, 50, p 365–369CrossRef

10.

W.B. Lee, Y.M. Yeon, and S.B. Jung, The Improvement of Mechanical Properties of Friction Stir-Welded A356 Al Alloy, Mater. Sci. Eng. A, 2003, 355, p 154–159CrossRef

11.

H.J. Liu, H. Fujii, and K.I. Nog, Mater. Sci. Technol., 2004, 20, p 399–402CrossRef

12.

Z.Y. Ma, R.S. Mishra, and M.W. Mahoney, Superplasticity in Cast A 356 Induced via Friction Stir Processing, Scripta Mater., 2004, 50(7), p 931–935CrossRef

13.

S.R. Sharma, Z.Y. Ma, and R.S. Mishra, Effect of Friction Stir Processing on Fatigue Behavior of A356 Alloy, Scripta Mater., 2004, 51(3), p 237–241CrossRef

14.

B. Li, Y. Shen, and H. Weiye, The Study on Defects in Aluminium 2219-T6 Thick Butt Friction Stir Welds with the Application of Multiple Non-destructive Testing Methods, Mater. Des., 2011, 32, p 2073–2084CrossRef

15.

S.R. Luis, G.S. Telmo, P. Moisés, M.R. Pedro, and V. Pedro, Advanced Technique for Non-destructive Testing of Friction Stir Welding of Metals, Measurement, 2010, 43, p 1021–1030CrossRef

16.

C. Changming, K. Radovan, and J. Dragana, Wavelet Transform Analysis of Acoustic Emission in Monitoring Friction Stir Welding of 6061 Aluminium, Int. J. Mach. Tools Manuf., 2003, 43, p 1383–1390CrossRef

17.

T. Saravanan, H. Das, K. Arunmuthu, J. Philip, B.P.C. Rao, T. Jayakumar, and T.K. Pal, Evaluation of Dissimilar Friction Stir Lap Joints Using Digital X-ray Radiography, Sci. Technol. Weld. Join., 2014, 19(2), p 125–132CrossRef

18.

H. Das, S. Basak, and G. Das, Influence of Energy Induced from Processing Parameters on the Mechanical Properties of Friction Stir Welded Lap Joint of Aluminium to Coated Steel Sheet, Int. J. Adv. Manuf. Technol., 2013, 64, p 1653–1661CrossRef

19.

K. Kimapong and T. Watanabe, Lap Joint of A5083 Aluminium Alloy and SS400 Steel by Friction Stir Welding, Mater. Trans. JIM, 2005, 46, p 835–841CrossRef

20.

H. Das, S.S. Jana, T.K. Pal, and A. De, Numerical and Experimental Investigation on Friction Stir Lap Welding of Aluminium to Steel, Sci. Technol. Weld. Join., 2014, 19(1), p 69–76CrossRef

21.

C. Bitondo, U. Prisco, A. Squillace, G. Giorleo, P. Buonadonna, G. Dionoro, and G. Campanile, Friction Stir Welding of AA2198-T3 Butt Joints for Aeronautical Applications, Int. J. Mater. Form., 2010, 3, p 1079–1082CrossRef

22.

C. Bitondo, U. Prisco, A. Squillace, P. Buonadonna, and G. Dionoro, Friction-Stir Welding of AA 2198 Butt Joints: Mechanical Characterization of the Process and of the Welds Through DOE Analysis, Int. J. Adv. Manuf. Technol., 2011, 23, p 505–516CrossRef

23.

S. Zimmer, L. Langlois, J. Laye, and R. Bigot, Experimental Investigation of the Influence of the FSW Plunge Processing Parameters on the Maximum Generated Force and Torque, Int. J. Adv. Manuf. Technol., 2010, 47, p 201–215CrossRef

24.

A. Kumar, K.V. Rajkumar, P. Palanichamy, T. Jayakumar, R. Chellapandian, K.V. Kasiviswanathan, B. Raj, V.H. Patankar, and V.M. Joshi, Development and Applications of C-Scan Ultrasonic Facility, BARC Newslett., 2007, 285, p 49–70

25.

Y.G. Kim, H. Fujii, T. Tsumura, T. Komazaki, and K. Nakata, Three Defect Types in Friction Stir Welding of Aluminium Die Casting Alloy, Mater. Sci. Eng. A, 2006, 415, p 250–254CrossRef

26.

M. Santella, G. Grant, and W. Arbegast, Proc. Plunge Testing to Evaluate Tool Materials for Friction Stir Welding of 6061 + 20wt% Al ₂ O ₃ Composite. Proceedings of the 4th International Symposium on Friction Stir Welding, Part City, USA, 2003.

27.

A. Arora, Z. Zhang, A. De, and T. Deb Roy, Strains and Strain Rates During Friction Stir Welding, Scripta Mater., 2009, 61, p 863–866CrossRef

Titel: Nondestructive Evaluation of Friction Stir-Welded Aluminum Alloy to Coated Steel Sheet Lap Joint
verfasst von: H. Das
A. Kumar
K. V. Rajkumar
T. Saravanan
T. Jayakumar
Tapan Kumar Pal
Publikationsdatum: 18.09.2015
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 11/2015
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-015-1713-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 11/2015

Effect of Preheat Treatment on the Texture Evolution During Cold Rolling of AA 3003 Aluminum Alloy

Effect of 0.2 and 0.5% Ti on the microstructure and mechanical properties of 13Cr supermartensitic stainless steel

An Analysis on Microstructure and Grain Size of Molybdenum Powder Material Processed by Equal Channel Angular Pressing

Radiation Degradation of Polytetrafluoroethylene-Lead Composites

Development of Highly Ductile Spheroidized Steel from High C (0.61 wt.% C) Low-Alloy Steel

The Tribological Behaviors of Three Films Coated on Biomedical Titanium Alloy by Chemical Vapor Deposition

Premium Partner

Marktübersichten