Skip to main content
Erschienen in: Flow, Turbulence and Combustion 2/2019

09.07.2018

Numerical Study of the Mixing Inside a Jet Stirred Reactor using Large Eddy Simulations

verfasst von: Ghazaleh Esmaeelzade, Kai Moshammer, Ravi Fernandes, Detlev Markus, Holger Grosshans

Erschienen in: Flow, Turbulence and Combustion | Ausgabe 2/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config
loading …

Abstract

Jet Stirred Reactors (JSR) have been extensively used in the last decades to investigate gas phase chemical kinetics. Inside the JSR efficient mixing through turbulent jets is required in order to obtain homogeneous compositions. One of the best ways to achieve the mixing of the gas phase is to use turbulent jets obtained from nozzles. In our research, Computational Fluid Dynamics (CFD) simulations were applied to predict the mixing and flow field characteristics inside a spherical reactor. Large-Eddy Simulations (LES) were used to compute the residence time distribution and the mixing inside the JSR for different flow rates. Our simulations concern a non-reacting mixture at ambient conditions. The results agree well with tracer-decay data, experimentally measured using laser absorption spectroscopy, and with a CFD analysis of the mixing rate based on the Reynolds-Averaged Navier-Stokes (RANS) approach. Our simulations enable us to provide detailed information concerning the instantaneous turbulent structures which effectuate mixing inside the JSR.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literatur
1.
Zurück zum Zitat Herbinet, O., Dayma, G.: Cleaner Combustion. In: Jet-Stirred Reactors. Springer, London (2013) Herbinet, O., Dayma, G.: Cleaner Combustion. In: Jet-Stirred Reactors. Springer, London (2013)
2.
Zurück zum Zitat Hanson, R., Davidson, D.: Recent advances in laser absorption and shock tube methods for studies of combustion chemistry. Prog. Energy Combust. Sci. 44, 103–114 (2014)CrossRef Hanson, R., Davidson, D.: Recent advances in laser absorption and shock tube methods for studies of combustion chemistry. Prog. Energy Combust. Sci. 44, 103–114 (2014)CrossRef
3.
Zurück zum Zitat Dryer, F.L., Haas, F.M., Santner, J., Farouk, T.I., Chaos, M.: Interpreting chemical kinetics from complex reaction–advection–diffusion systems: Modeling of flow reactors and related experiments. Prog. Energy Combust. Sci. 44, 19–39 (2014)CrossRef Dryer, F.L., Haas, F.M., Santner, J., Farouk, T.I., Chaos, M.: Interpreting chemical kinetics from complex reaction–advection–diffusion systems: Modeling of flow reactors and related experiments. Prog. Energy Combust. Sci. 44, 19–39 (2014)CrossRef
4.
Zurück zum Zitat Sung, C. -J., Curran, H.J.: Using rapid compression machines for chemical kinetics studies. Prog. Energy Combust. Sci. 44, 1–18 (2014)CrossRef Sung, C. -J., Curran, H.J.: Using rapid compression machines for chemical kinetics studies. Prog. Energy Combust. Sci. 44, 1–18 (2014)CrossRef
5.
Zurück zum Zitat Goldsborough, S., Hochgreb, S., Vanhove, G., Wooldridge, M., Curran, H., Sung, C.: Advances in rapid compression machine studies of low-and intermediate-temperature autoignition phenomena. Prog. Energy Combust. Sci. 63, 1–78 (2017)CrossRef Goldsborough, S., Hochgreb, S., Vanhove, G., Wooldridge, M., Curran, H., Sung, C.: Advances in rapid compression machine studies of low-and intermediate-temperature autoignition phenomena. Prog. Energy Combust. Sci. 63, 1–78 (2017)CrossRef
6.
Zurück zum Zitat Moshammer, K., Jasper, A.W., Popolan-Vaida, D., Lucassen, A., Diévart, P., Selim, H., Eskola, A.J., Taatjes, C.A., Leone, S.R., Sarathy, S.M., Ju, Y., Dagaut, P., Kohse-Höinghaus, K., Hansen, N.: Detection and Identification of the keto-hydroperoxide (HOOCH2OCHO) and other intermediates during low-temperature oxidation of dimethyl ether. J. Phys. Chem. A 119(28), 7361–7374 (2015)CrossRef Moshammer, K., Jasper, A.W., Popolan-Vaida, D., Lucassen, A., Diévart, P., Selim, H., Eskola, A.J., Taatjes, C.A., Leone, S.R., Sarathy, S.M., Ju, Y., Dagaut, P., Kohse-Höinghaus, K., Hansen, N.: Detection and Identification of the keto-hydroperoxide (HOOCH2OCHO) and other intermediates during low-temperature oxidation of dimethyl ether. J. Phys. Chem. A 119(28), 7361–7374 (2015)CrossRef
7.
Zurück zum Zitat Fogler, H.S.: Elements of Chemical Reaction Engineering. Prentice-Hall International, London (1999) Fogler, H.S.: Elements of Chemical Reaction Engineering. Prentice-Hall International, London (1999)
8.
Zurück zum Zitat David, R., Matras, D.: Règies de construction et d’extrapolation des réacteurs auto-agités par jets gazeux. Can. J. Chem. Eng. 53(3), 297–300 (1975)CrossRef David, R., Matras, D.: Règies de construction et d’extrapolation des réacteurs auto-agités par jets gazeux. Can. J. Chem. Eng. 53(3), 297–300 (1975)CrossRef
9.
Zurück zum Zitat Dagaut, P., Cathonnet, M., Rouan, J.P., Foulatier, R., Quilgars, A., Boettner, J.C., Gaillard, F., James, H.: A jet-stirred reactor for kinetic studies of homogeneous gas-phase reactions at pressures up to ten atmospheres (≈ 1 MPa). J. Phys. E: Sci. Instrum. 19(3), 207 (1986)CrossRef Dagaut, P., Cathonnet, M., Rouan, J.P., Foulatier, R., Quilgars, A., Boettner, J.C., Gaillard, F., James, H.: A jet-stirred reactor for kinetic studies of homogeneous gas-phase reactions at pressures up to ten atmospheres (≈ 1 MPa). J. Phys. E: Sci. Instrum. 19(3), 207 (1986)CrossRef
10.
Zurück zum Zitat Rota, R., Bonini, F., Servida, A., Morbidelli, M., Carra, S.: Validation and updating of detailed kinetic mechanisms: the case of ethane oxidation. Ind. Eng. Chem. 33(11), 2540–2553 (1994)CrossRef Rota, R., Bonini, F., Servida, A., Morbidelli, M., Carra, S.: Validation and updating of detailed kinetic mechanisms: the case of ethane oxidation. Ind. Eng. Chem. 33(11), 2540–2553 (1994)CrossRef
11.
Zurück zum Zitat Ayass, W.W., Nasir, E.F., Farooq, A., Sarathy, S.M.: Mixing-structure relationship in jet-stirred reactors. Chem. Eng. Res. Des. 111, 461–464 (2016)CrossRef Ayass, W.W., Nasir, E.F., Farooq, A., Sarathy, S.M.: Mixing-structure relationship in jet-stirred reactors. Chem. Eng. Res. Des. 111, 461–464 (2016)CrossRef
12.
Zurück zum Zitat Gil, I., Mocek, P.: CFD Analysis of mixing in jet stirred reactors. Chem. Process Eng. 33(3), 397–410 (2012)CrossRef Gil, I., Mocek, P.: CFD Analysis of mixing in jet stirred reactors. Chem. Process Eng. 33(3), 397–410 (2012)CrossRef
13.
Zurück zum Zitat Ayass, W.W.: Mixing in Jet-Stirred Reactors with Different Geometries. Master’s thesis, King Abdullah University of Science and Technology (2013) Ayass, W.W.: Mixing in Jet-Stirred Reactors with Different Geometries. Master’s thesis, King Abdullah University of Science and Technology (2013)
14.
Zurück zum Zitat Grosshans, H., Szász, R.-Z., Fuchs, L.: Enhanced liquid–gas mixing due to pulsating injection. Comput. Fluids 107, 196–204 (2015)MathSciNetCrossRefMATH Grosshans, H., Szász, R.-Z., Fuchs, L.: Enhanced liquid–gas mixing due to pulsating injection. Comput. Fluids 107, 196–204 (2015)MathSciNetCrossRefMATH
15.
Zurück zum Zitat Ghorbani, A., Steinhilber, G., Markus, D., Maas, U.: Ignition by transient hot turbulent jets: an investigation of ignition mechanisms by means of a PDF/REDIM method. Proc. Combust. Inst. 35(2), 2191–2198 (2015)CrossRef Ghorbani, A., Steinhilber, G., Markus, D., Maas, U.: Ignition by transient hot turbulent jets: an investigation of ignition mechanisms by means of a PDF/REDIM method. Proc. Combust. Inst. 35(2), 2191–2198 (2015)CrossRef
17.
Zurück zum Zitat Echekki, T., Mastorakos, E.: Turbulent combustion modeling: advances, New Trends and Perspectives. Springer, New York (2010)MATH Echekki, T., Mastorakos, E.: Turbulent combustion modeling: advances, New Trends and Perspectives. Springer, New York (2010)MATH
18.
Zurück zum Zitat Mahesh, K., Constantinescu, G., Apte, S., Iaccarino, G., Ham, F., Moin, P.: Large-Eddy simulation of reacting turbulent flows in complex geometries. J. Appl. Mech-Tran. ASME 73(3), 374–381 (2006)CrossRefMATH Mahesh, K., Constantinescu, G., Apte, S., Iaccarino, G., Ham, F., Moin, P.: Large-Eddy simulation of reacting turbulent flows in complex geometries. J. Appl. Mech-Tran. ASME 73(3), 374–381 (2006)CrossRefMATH
19.
Zurück zum Zitat Veynante, D.: Turbulence and Interactions. In: Large Eddy Simulations of Turbulent Combustion. Springer, Berlin Heidelberg (2009) Veynante, D.: Turbulence and Interactions. In: Large Eddy Simulations of Turbulent Combustion. Springer, Berlin Heidelberg (2009)
20.
Zurück zum Zitat Smagorinsky, J.: General circulation experiments with the primitive equations: I. The basic equations. Mon. Weather Rev. 91(3), 99–164 (1963)CrossRef Smagorinsky, J.: General circulation experiments with the primitive equations: I. The basic equations. Mon. Weather Rev. 91(3), 99–164 (1963)CrossRef
21.
Zurück zum Zitat Banaeizadeh, A., Afshari, A., Schock, H., Jaberi, F.: Large-Eddy simulations of turbulent flows in internal combustion engines. Int. J. Heat Mass Transf. 60, 781–796 (2013)CrossRef Banaeizadeh, A., Afshari, A., Schock, H., Jaberi, F.: Large-Eddy simulations of turbulent flows in internal combustion engines. Int. J. Heat Mass Transf. 60, 781–796 (2013)CrossRef
22.
Zurück zum Zitat Poinsot, T., Veynante, D.: Theoretical and Numerical Combustion. Edwards, USA (2005) Poinsot, T., Veynante, D.: Theoretical and Numerical Combustion. Edwards, USA (2005)
23.
Zurück zum Zitat Issa, R.I.: Solution of the implicitly discretised fluid flow equations by operator-splitting. J. Comput. Phys. 62(1), 40–65 (1986)MathSciNetCrossRefMATH Issa, R.I.: Solution of the implicitly discretised fluid flow equations by operator-splitting. J. Comput. Phys. 62(1), 40–65 (1986)MathSciNetCrossRefMATH
24.
Zurück zum Zitat Patankar, S.V.: Numerical Heat Transfer and Fluid Flow. Hemisphere, New York (1980)MATH Patankar, S.V.: Numerical Heat Transfer and Fluid Flow. Hemisphere, New York (1980)MATH
25.
Zurück zum Zitat Crawford, M.R.: A Computational Study of Mixing in Jet Stirred Reactors. Ph.D. dissertation, University of Akron (2014) Crawford, M.R.: A Computational Study of Mixing in Jet Stirred Reactors. Ph.D. dissertation, University of Akron (2014)
26.
Zurück zum Zitat Klein, M., Sadiki, A., Janicka, J.: A digital filter based generation of inflow data for spatially developing direct numerical or large Eddy simulations. J. Comput. Phys. 186(2), 652–665 (2003)CrossRefMATH Klein, M., Sadiki, A., Janicka, J.: A digital filter based generation of inflow data for spatially developing direct numerical or large Eddy simulations. J. Comput. Phys. 186(2), 652–665 (2003)CrossRefMATH
27.
Metadaten
Titel
Numerical Study of the Mixing Inside a Jet Stirred Reactor using Large Eddy Simulations
verfasst von
Ghazaleh Esmaeelzade
Kai Moshammer
Ravi Fernandes
Detlev Markus
Holger Grosshans
Publikationsdatum
09.07.2018
Verlag
Springer Netherlands
Erschienen in
Flow, Turbulence and Combustion / Ausgabe 2/2019
Print ISSN: 1386-6184
Elektronische ISSN: 1573-1987
DOI
https://doi.org/10.1007/s10494-018-9961-z

Weitere Artikel der Ausgabe 2/2019

Flow, Turbulence and Combustion 2/2019 Zur Ausgabe

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.