nach oben

Tribology Letters

Erschienen in:

01.02.2023 | Original Paper

Optimum Wear Resistance Achieved by Balancing Bulk Hardness and Work-Hardening: A Case Study in Austenitic Stainless Steels

verfasst von: Hengyi Zhang, Lingyu Wang, Jun Hu, Guodong Wang, Wei Xu

Erschienen in: Tribology Letters | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Wear, which exists in all industries and walks of life, causes tremendous economic losses and even major disasters. To prevent damage caused by wear, Archard’s theory suggests the use of materials with higher hardness. However, such materials are minimally formable and difficult to manufacture. Recent studies have reported that strain hardening is another factor that significantly affects wear resistance. In this study, to investigate the relative potential of each of these factors and examine the balance between the hardness and work-hardening properties under various working conditions, we selected 321 austenitic stainless steel as a candidate material. Cold-rolling, which improves the base strength of the material, was used to develop strain-induced α′-martensite. Simultaneously, the strain-hardening capability of the material was decreased. The wear resistance and corresponding failure mechanisms were evaluated using the ball-on-disc test under various loading conditions. The results indicate that wear resistance depends on the bulk hardness and loading conditions used. A series of microstructural analyses revealed that the wear resistance is closely related to the base strength and hardening capability of the material. Therefore, this study establishes an optimum hardness–strain hardening balance and elucidates the design of low-hardness, high-wear-resistance materials for future applications.

Vorheriger Artikel Experimental and Finite Element Analysis of Plastic Domain Evolution of Wavy Surfaces During Contact

Nächster Artikel Wear Induced Sub-surface Deformation Characteristics of a 26 Wt% Cr White Cast Iron Subjected to a Destabilization Heat Treatment

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Trevisiol, C., Jourani, A., Bouvier, S.: Effect of hardness, microstructure, normal load and abrasive size on friction and on wear behaviour of 35NCD16 steel. Wear 388–389, 101–111 (2017). https://doi.org/10.1016/j.wear.2017.05.008CrossRef

Das Bakshi, S., Sinha, D., Ghosh Chowdhury, S., Mahashabde, V.V.: Surface and sub-surface damage of 0.20 wt% C-martensite during three-body abrasion. Wear 394–395, 217–227 (2018). https://doi.org/10.1016/j.wear.2017.07.004CrossRef

Das Bakshi, S., Shipway, P.H., Bhadeshia, H.K.D.H.: Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite. Wear 308, 46–53 (2013). https://doi.org/10.1016/j.wear.2013.09.008CrossRef

Tyfour, W.R., Beynon, J.H., Kapoor, A.: The steady state wear behaviour of pearlitic rail steel under dry rolling-sliding contact conditions. Wear 180, 79–89 (1995). https://doi.org/10.1016/0043-1648(94)06533-0CrossRef

Moghaddam, P.V., Hardell, J., Vuorinen, E., Prakash, B.: The role of retained austenite in dry rolling/sliding wear of nanostructured carbide-free bainitic steels. Wear 428–429, 193–204 (2019). https://doi.org/10.1016/j.wear.2019.03.012CrossRef

Tressia, G., Pereira, J.I., Penagos, J.J., Bortoleto, E., Sinatora, A.: Effect of in-service work hardening on the sliding wear resistance of a heavy haul rail in the gauge corner. Wear 482–483, 203979 (2021). https://doi.org/10.1016/j.wear.2021.203979CrossRef

Téllez-Villaseñor, M.A., León-Patiño, C.A., Aguilar-Reyes, E.A., Bedolla-Jacuinde, A.: Effect of load and sliding velocity on the wear behaviour of infiltrated TiC/Cu–Ni composites. Wear 484–485, 203667 (2021). https://doi.org/10.1016/j.wear.2021.203667CrossRef

Lim, S.C.: Recent developments in wear-mechanism maps. Tribol Int 31, 87–97 (1998). https://doi.org/10.1016/s0301-679x(98)00011-5CrossRef

Liu, B., Li, W., Lu, X., Jia, X., Jin, X.: An integrated model of impact-abrasive wear in bainitic steels containing retained austenite. Wear 440–441, 203088 (2019). https://doi.org/10.1016/j.wear.2019.203088CrossRef

10.

Liu, B., Li, W., Lu, X., Jia, X., Jin, X.: The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels. Wear 428–429, 127–136 (2019). https://doi.org/10.1016/j.wear.2019.02.032CrossRef

11.

Qin, W., Li, J., Liu, Y., Yue, W., Wang, C., Mao, Q., et al.: Effect of rolling strain on the mechanical and tribological properties of 316 L stainless steel. J. Tribol. (2019). https://doi.org/10.1115/1.4041214CrossRef

12.

Fargas, G., Roa, J.J., Mateo, A.: Influence of pre-existing martensite on the wear resistance of metastable austenitic stainless steels. Wear 364–365, 40–47 (2016). https://doi.org/10.1016/j.wear.2016.06.018CrossRef

13.

Ueda, M., Uchino, K., Kobayashi, A.: Effects of carbon content on wear property in pearlitic steels. Wear 253, 107–113 (2002). https://doi.org/10.1016/s0043-1648(02)00089-3CrossRef

14.

Liu, R., Li, D.Y.: Modification of Archard’s equation by taking account of elastic/pseudoelastic properties of materials. Wear 251, 956–964 (2001). https://doi.org/10.1016/s0043-1648(01)00711-6CrossRef

15.

Lindroos, M., Valtonen, K., Kemppainen, A., Laukkanen, A., Holmberg, K., Kuokkala, V.-T.: Wear behavior and work hardening of high strength steels in high stress abrasion. Wear 322–323, 32–40 (2015). https://doi.org/10.1016/j.wear.2014.10.018CrossRef

16.

Viáfara, C.C., Castro, M.I., Vélez, J.M., Toro, A.: Unlubricated sliding wear of pearlitic and bainitic steels. Wear 259, 405–411 (2005). https://doi.org/10.1016/j.wear.2005.02.013CrossRef

17.

Zhang, G.-S., Xing, J.-D., Gao, Y.-M.: Impact wear resistance of WC/Hadfield steel composite and its interfacial characteristics. Wear 260, 728–734 (2006). https://doi.org/10.1016/j.wear.2005.04.010CrossRef

18.

Shukla, N., Roy, H., Show, B.K.: Tribological behavior of a 0.33% C dual-phase steel with Pre I/C hardening and tempering treatment under abrasive wear condition. Tribol T 59, 593–603 (2016). https://doi.org/10.1080/10402004.2015.1094841CrossRef

19.

Xu, X., van der Zwaag, S., Xu, W.: The effect of martensite volume fraction on the scratch and abrasion resistance of a ferrite–martensite dual phase steel. Wear 348–349, 80–88 (2016). https://doi.org/10.1016/j.wear.2015.11.017CrossRef

20.

Jha, A.K., Prasad, B.K., Modi, O.P., Das, S., Yegneswaran, A.H.: Correlating microstructural features and mechanical properties with abrasion resistance of a high strength low alloy steel. Wear 254, 120–128 (2003). https://doi.org/10.1016/s0043-1648(02)00309-5CrossRef

21.

Pöhl, F., Hardes, C., Theisen, W.: Deformation behavior and dominant abrasion micro mechanisms of tempering steel with varying carbon content under controlled scratch testing. Wear 422–423, 212–222 (2019). https://doi.org/10.1016/j.wear.2019.01.073CrossRef

22.

Souza Filho, I.R., Sandim, M.J.R., Ponge, D., Sandim, H.R.Z., Raabe, D.: Strain hardening mechanisms during cold rolling of a high-Mn steel: Interplay between submicron defects and microtexture. Mater Sci Eng A 754, 636–649 (2019). https://doi.org/10.1016/j.msea.2019.03.116CrossRef

23.

Shi, Y., Yuan, M., Li, Z., La, P.: Two-step rolling and annealing makes nanoscale 316L austenite stainless steel with high ductility. Mater. Sci. Eng. A 759, 391–395 (2019). https://doi.org/10.1016/j.msea.2019.05.054CrossRef

24.

Kim, M.T., Park, T.M., Baik, K.-H., Choi, W.S., Han, J.: Effects of cold rolling reduction ratio on microstructures and tensile properties of intercritically annealed medium-Mn steels. Mater. Sci. Eng. A 752, 43–54 (2019). https://doi.org/10.1016/j.msea.2019.02.091CrossRef

25.

He, Y., Zhang, J., Wang, Y., Wang, Y., Wang, T.: The expansion behavior caused by deformation-induced martensite to austenite transformation in heavily cold-rolled metastable austenitic stainless steel. Mater. Sci. Eng. A 739, 343–347 (2019). https://doi.org/10.1016/j.msea.2018.10.075CrossRef

26.

He, W., Li, F., Zhang, H., Chen, H., Guo, H.: The influence of cold rolling deformation on tensile properties and microstructures of Mn18Cr18 N austenitic stainless steel. Mater. Sci. Eng. A (2019). https://doi.org/10.1016/j.msea.2019.138245CrossRef

27.

Benzing, J.T., da Silva, A.K., Morsdorf, L., Bentley, J., Ponge, D., Dutta, A., et al.: Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel. Acta Materialia 166, 512–530 (2019). https://doi.org/10.1016/j.actamat.2019.01.003CrossRef

28.

Amininejad, A., Jamaati, R., Hosseinipour, S.J.: Achieving superior strength and high ductility in AISI 304 austenitic stainless steel via asymmetric cold rolling. Mater. Sci. Eng. A (2019). https://doi.org/10.1016/j.msea.2019.138433CrossRef

29.

Aletdinov, A., Mironov, S., Korznikova, G., Konkova, T., Zaripova, R., Myshlyaev, M., et al.: EBSD investigation of microstructure evolution during cryogenic rolling of type 321 metastable austenitic steel. Mater. Sci. Eng A 745, 460–473 (2019). https://doi.org/10.1016/j.msea.2018.12.115CrossRef

30.

Shintani, T., Murata, Y.: Evaluation of the dislocation density and dislocation character in cold rolled Type 304 steel determined by profile analysis of X-ray diffraction. Acta Materialia 59, 4314–4322 (2011). https://doi.org/10.1016/j.actamat.2011.03.055CrossRef

31.

Hedayati, A., Najafizadeh, A., Kermanpur, A., Forouzan, F.: The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel. J. Mater. Process. Technol. 210, 1017–1022 (2010). https://doi.org/10.1016/j.jmatprotec.2010.02.010CrossRef

32.

De, A.K., Murdock, D.C., Mataya, M.C., Speer, J.G., Matlock, D.K.: Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction. Scripta Materialia 50, 1445–1449 (2004). https://doi.org/10.1016/j.scriptamat.2004.03.011CrossRef

33.

Takaki, S., Tomimura, K., Ueda, S.: Effect of Pre-cold-working on diffusional reversion of deformation induced martensite in metastable austenitic stainless steel. ISIJ Int. 34, 522–527 (1994). https://doi.org/10.2355/isijinternational.34.522CrossRef

34.

Efremenko, V.G., Hesse, O., Friedrich, T., Kunert, M., Brykov, M.N., Shimizu, K., et al.: Two-body abrasion resistance of high-carbon high-silicon steel: metastable austenite vs nanostructured bainite. Wear 418–419, 24–35 (2019). https://doi.org/10.1016/j.wear.2018.11.003CrossRef

35.

Yan, X., Hu, J., Yu, H., Wang, C., Xu, W.: Unraveling the significant role of retained austenite on the dry sliding wear behavior of medium manganese steel. Wear (2021). https://doi.org/10.1016/j.wear.2021.203745CrossRef

36.

Saada, F.B., Antar, Z., Elleuch, K., Ponthiaux, P., Gey, N.: The effect of nanocrystallized surface on the tribocorrosion behavior of 304L stainless steel. Wear 394–395, 71–79 (2018). https://doi.org/10.1016/j.wear.2017.10.007CrossRef

37.

Li, G., Chen, J., Guan, D.: Friction and wear behaviors of nanocrystalline surface layer of medium carbon steel. Tribol. Int. 43, 2216–2221 (2010). https://doi.org/10.1016/j.triboint.2010.07.004CrossRef

38.

Yan, W., Fang, L., Zheng, Z., Sun, K., Xu, Y.: Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel. Tribol. Int. 42, 634–641 (2009). https://doi.org/10.1016/j.triboint.2008.08.012CrossRef

39.

Zhang, F.C., Lei, T.Q.: A study of friction-induced martensitic transformation for austenitic manganese steel. Wear 212, 195–198 (1997)CrossRef

40.

Li, C.X., Bell, T.: Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steel. Wear 256, 1144–1152 (2004). https://doi.org/10.1016/j.wear.2003.07.006CrossRef

41.

Zandrahimi, M., Bateni, M.R., Poladi, A., Szpunar, J.A.: The formation of martensite during wear of AISI 304 stainless steel. Wear 263, 674–678 (2007). https://doi.org/10.1016/j.wear.2007.01.107CrossRef

42.

Williams, J.A.: Analytical models of scratch hardness. Tribol. Int. 29, 675–694 (1996). https://doi.org/10.1016/0301-679x(96)00014-xCrossRef

43.

Talonen, J., Hänninen, H.: Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels. Acta Materialia 55, 6108–6118 (2007). https://doi.org/10.1016/j.actamat.2007.07.015CrossRef

Titel: Optimum Wear Resistance Achieved by Balancing Bulk Hardness and Work-Hardening: A Case Study in Austenitic Stainless Steels
verfasst von: Hengyi Zhang
Lingyu Wang
Jun Hu
Guodong Wang
Wei Xu
Publikationsdatum: 01.02.2023
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 1/2023
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-022-01681-5

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

Enhancing the Tribological Performance of MoS Coatings in Humid Environments with the Addition of BiS

Transition from Plastic Shearing to Fracture of Asperity Junctions: Role of a Critical Aspect Ratio

A Mortar Finite Element Formulation for Large Deformation Lubricated Contact Problems with Smooth Transition Between Mixed, Elasto-Hydrodynamic and Full Hydrodynamic Lubrication

Experimental and Finite Element Analysis of Plastic Domain Evolution of Wavy Surfaces During Contact

The Role of Fragility in Thermal Elastohydrodynamics

Wear Induced Sub-surface Deformation Characteristics of a 26 Wt% Cr White Cast Iron Subjected to a Destabilization Heat Treatment

Premium Partner

Marktübersichten