nach oben

Tribology Letters

Erschienen in:

01.03.2023 | Original Paper

Transition from Plastic Shearing to Fracture of Asperity Junctions: Role of a Critical Aspect Ratio

verfasst von: Mohammad Malekan

Erschienen in: Tribology Letters | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Material loss can result through sliding contact between solids, primarily due to wear process. Failure of interlocking asperities in contact, which can occur as a fracture-induced or plastic shearing mechanism, is a significant contributor in material wear. We developed an analytical model to predict asperity junction failure mechanisms as a function of material properties (fracture toughness and shear strength) and geometrical parameters (asperity height and width). The failure causes fracture-induced and plastic shearing below and above a threshold aspect ratio, respectively. This was validated by a wide range of configurations and materials using both finite element simulations and documented data from literature.

Graphical Abstract

Vorheriger Artikel Experimental Investigation of Tribological and Rheological Behaviour of Hybrid Nanolubricants for Applications in Internal Combustion Engines

Nächster Artikel Effect of TiC Particles Addition on Tribological Behavior of Ductile Iron

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Archard, J.F.: Contact and rubbing of flat surfaces. J. Appl. Phys. 24, 981–988 (1953). https://doi.org/10.1063/1.1721448CrossRef

Bhushan, B.: Contact mechanics of rough surfaces in tribology: multiple asperity contact. Tribol. Lett. 4, 1–35 (1998). https://doi.org/10.1023/A:1019186601445CrossRef

Pham-Ba, S., Brink, T., Molinari, J.-F.: Adhesive wear and interaction of tangentially loaded micro-contacts. Int. J. Solids Struct. 188–189, 261–268 (2020). https://doi.org/10.1016/j.ijsolstr.2019.10.023CrossRef

Lawn, B.R.: A model for the wear of brittle solids under fixed abrasive conditions. Wear 33(2), 369–372 (1975). https://doi.org/10.1016/0043-1648(75)90290-2CrossRef

Moore, M., King, F.: Abrasive wear of brittle solids. Wear 60, 123–140 (1980). https://doi.org/10.1016/0043-1648(80)90253-7CrossRef

Harish, A.B., Wriggers, P.: Modeling of two-body abrasive wear of filled elastomers as a contact-induced fracture process. Tribol. Int. 138, 16–31 (2019). https://doi.org/10.1016/j.triboint.2019.05.009CrossRef

Brink, T., Molinari, J.-F.: Adhesive wear mechanisms in the presence of weak interfaces: insights from an amorphous model system. Phys. Rev. Mater. 3, 053604 (2019). https://doi.org/10.1103/PhysRevMaterials.3.053604CrossRef

Suh, N.P.: The delamination theory of wear. Wear 25(1), 111–124 (1973). https://doi.org/10.1016/0043-1648(73)90125-7CrossRef

Rozeanu, L.: Fatigue wear as a rate process. Wear 6(5), 337–340 (1963). https://doi.org/10.1016/0043-1648(63)90201-1CrossRef

10.

Tewari, A., Basu, B., Bordia, R.K.: Model for fretting wear of brittle ceramics. Acta Mater. 57(7), 2080–2087 (2009). https://doi.org/10.1016/j.actamat.2009.01.013CrossRef

11.

Watson, S.W., Friedersdorf, F.J., Madsen, B.W., Cramer, S.D.: Methods of measuring wear-corrosion synergism. Wear 181–183(2), 476–484 (1995). https://doi.org/10.1016/0043-1648(95)90161-2CrossRef

12.

Brach, S., Collet, S.: Criterion for critical junctions in elastic-plastic adhesive wear. Phys. Rev. Lett. 127, 185501 (2021). https://doi.org/10.1103/PhysRevLett.127.185501CrossRef

13.

Bowden, F., Tabor, D.: The Friction and Lubrication of Solids. Oxford University Press, Oxford (2001)

14.

Maw, W., Stevens, F., Langford, S., Dickinson, J.: Single asperity tribochemical wear of silicon nitride studied by atomic force microscopy. J. Appl. Phys. 92, 5103 (2002). https://doi.org/10.1063/1.1510595CrossRef

15.

Gotsmann, B., Lantz, M.A.: Atomistic wear in a single asperity sliding contact. Phys. Rev. Lett. 125501, 101 (2008). https://doi.org/10.1103/PhysRevLett.101.125501CrossRef

16.

Merkle, A.P., Marks, L.D.: Liquid-like tribology of gold studied by in situ TEM. Wear 265, 1864 (2008). https://doi.org/10.1016/j.wear.2008.04.032CrossRef

17.

Bhaskaran, H., Gotsmann, B., Sebastian, A., Drechsler, U., Lantz, M.A., Despont, M., Jaroenapibal, P., Carpick, R.W., Chen, Y., Sridharan, K.: Ultralow nanoscale wear through atom-by-atom attrition in silicon-containing diamond-like carbon. Nat. Nanotechnol. 5, 181 (2010). https://doi.org/10.1038/nnano.2010.3CrossRef

18.

Mulvihill, D., Kartal, M., Nowell, D., Hills, D.: An elastic-plastic asperity interaction model for sliding friction. Tribol. Int. 44(12), 1679–1694 (2011). https://doi.org/10.1016/j.triboint.2011.06.018CrossRef

19.

Sato, T., Ishida, T., Jalabert, L., Fujita, H.: Real-time transmission electron microscope observation of nanofriction at a single Ag asperity. Nanotechnology 23(50), 505701 (2012). https://doi.org/10.1088/0957-4484/23/50/505701CrossRef

20.

Romero, P.A., Jarvi, T.T., Beckmann, N., Mrovec, M., Moseler, M.: Coarse graining and localized plasticity between sliding nanocrystalline metals. Phys. Rev. Lett. 113(36), 101 (2014). https://doi.org/10.1103/PhysRevLett.113.036101CrossRef

21.

Aghababaei, R., Brink, T., Molinari, J.-F.: Asperity-level origins of transition from mild to severe wear. Phys. Rev. Lett. 120, 186105 (2018). https://doi.org/10.1103/PhysRevLett.120.186105CrossRef

22.

Mishra, T., de Rooij, M., Shisode, M., Hazrati, J., Schipper, D.J.: An analytical model to study the effect of asperity geometry on forces in ploughing by an elliptical asperity. Tribol. Int. 137, 405–419 (2019). https://doi.org/10.1016/j.triboint.2019.05.015CrossRef

23.

Green, A.: Friction between unlubricated metals: a theoretical analysis of the junction model. Proc. R. Soc. 228, 191 (1955). https://doi.org/10.1098/rspa.1955.0043CrossRef

24.

Brockley, C.A., Fleming, G.K.: A model junction study of severe metallic wear. Wear 8(5), 374–380 (1965). https://doi.org/10.1016/0043-1648(65)90168-7CrossRef

25.

Byerlee, J.D.: Theory of friction based on brittle fracture. J. Appl. Phys. 38, 2928–2934 (1967). https://doi.org/10.1063/1.1710026CrossRef

26.

Liu, J., Notbohm, J.K., Carpick, R.W., Turner, K.T.: Method for characterizing nanoscale wear of atomic force microscope tips. ACS Nano 4, 3763 (2010). https://doi.org/10.1021/nn100246gCrossRef

27.

Bouchet, M.I.D.B., Matta, C., Vacher, B., Le-Mogne, T., Martin, J.M., Lautz, J.V., Ma, T., Pastewka, L., Otschik, J., Gumbsch, P., Moseler, M.: Energy filtering transmission electron microscopy and atomistic simulations of tribo-induced hybridization change of nanocrystalline diamond coating. Carbon 87, 317–329 (2015). https://doi.org/10.1016/j.carbon.2015.02.041CrossRef

28.

Vahdat, V., Grierson, D.S., Turner, K.T., Carpick, R.W.: Mechanics of interaction and atomic-scale wear of amplitude modulation atomic force microscopy probes. ACS Nano 7, 3221–3235 (2013). https://doi.org/10.1021/nn305901nCrossRef

29.

Liu, J., Jiang, Y., Grierson, D.S., Sridharan, K., Shao, Y., Jacobs, T.D.B., Falk, M.L., Carpick, R.W., Turner, K.T.: Tribochemical wear of diamond-like carbon-coated atomic force microscope tips. ACS Appl. Mater. Interface 9, 35341–35348 (2017). https://doi.org/10.1021/acsami.7b08026CrossRef

30.

Bernal, R.A., Carpick, R.W.: Visualization of nanoscale wear mechanisms in ultrananocrystalline diamond by in-situ TEM tribometry. Carbon 154, 132–139 (2019). https://doi.org/10.1016/j.carbon.2019.07.082CrossRef

31.

Aghababaei, R., Warner, D.H., Molinari, J.-F.: Critical length scale controls adhesive wear mechanisms. Nat. Commun. 7, 11816 (2016). https://doi.org/10.1038/ncomms11816CrossRef

32.

Aghababaei, R.: On the origins of third-body particle formation during adhesive wear. Wear 426–427(Part B), 1076–1081 (2019). https://doi.org/10.1016/j.wear.2018.12.060CrossRef

33.

Aghababaei, R.: Effect of adhesion on material removal during adhesive wear. Phys. Rev. Mater. 3(6), 2476–2485 (2019). https://doi.org/10.1103/PhysRevMaterials.3.063604CrossRef

34.

Collet, S., Molinari, J.-F., Brach, S.: Variational phase-field continuum model uncovers adhesive wear mechanisms in asperity junctions. J. Mech. Phys. Solids 145, 104130 (2020). https://doi.org/10.1016/j.jmps.2020.104130CrossRef

35.

Xu, H., Komvopoulos, K.: A fracture mechanics analysis of asperity cracking due to sliding contact. Int. J. Solids Struct. 171, 1–9 (2019). https://doi.org/10.1016/j.ijsolstr.2019.05.005CrossRef

36.

Carollo, V., Paggi, M., Reinoso, J.: The steady-state archard adhesive wear problem revisited based on the phase field approach to fracture. Int. J. Fract. 215, 39–48 (2019). https://doi.org/10.1007/s10704-018-0329-0CrossRef

37.

Aghababaei, R., Budzik, M.: Fracture modes of brittle junctions under shear. Ext. Mech. Lett. 35, 100644 (2020). https://doi.org/10.1016/j.eml.2020.100644CrossRef

38.

Suo, Z., Hutchinson, J.: Interface crack between two elastic layers. Int. J. Fract. 43, 1–18 (1990). https://doi.org/10.1007/BF00018123CrossRef

39.

Jensen, H., Thouless, M.: Effects of residual stresses in the blister test. Int. J. Solids Struct. 30(6), 779–795 (1993). https://doi.org/10.1016/0020-7683(93)90040-ECrossRef

40.

Malekan, M., Budzik, M.K., Jensen, H.M., Aghababaei, R.: Fracture analyses of surface asperities during sliding contact. Tribol. Int. 159, 106939 (2021). https://doi.org/10.1016/j.triboint.2021.106939CrossRef

41.

Williams, M.: Stress singularities resulting from various boundary conditions in angular corners of plates in extension. J. Appl. Mech. 19, 526–528 (1952). https://doi.org/10.1115/1.4010553CrossRef

42.

Seweryn, A.: Brittle fracture criterion for structures with sharp notches. Eng. Fract. Mech. 47, 673–681 (1994). https://doi.org/10.1016/0013-7944(94)90158-9CrossRef

43.

Carpinteri, A.: Stress-singularity and generalized fracture toughness at the vertex of re-entrant corners. Eng. Fract. Mech. 26, 143–155 (1987). https://doi.org/10.1016/0013-7944(87)90086-5CrossRef

44.

Carpinteri, A., Cornetti, P., Pugno, N., Sapora, A., Taylor, D.: A finite fracture mechanics approach to structures with sharp V-notches. Eng. Fract. Mech. 75, 1736–1752 (2008). https://doi.org/10.1016/j.engfracmech.2007.04.010CrossRef

45.

Carpinteri, A., Paggi, M., Pugno, N.: Numerical evaluation of generalized stress-intensity factors in multi-layered composites. Int. J. Solids Struct. 43, 627–641 (2006). https://doi.org/10.1016/j.ijsolstr.2005.06.009CrossRef

46.

Hibbeler, R.C.: Mechanics of Materials, 10th edn. Pearson Education Inc, Boston (2017)

47.

Malekan, M.: Fracture loads of sharp and blunt asperities under normal and tangential loading. Tribol. Int. 177, 107949 (2023). https://doi.org/10.1016/j.triboint.2022.107949CrossRef

48.

Johnson, G.R., Cook, J.R.: Constitutive model and data for metals subjected to large strains, high strain rates, and high temperatures. In: Proceedings of 7th Symposium on Ballistics, Netherlands (1983)

49.

Krasauskas, P., Kilikevicius, S., Česnavicius, R., Pacenga, D.: Experimental analysis and numerical simulation of the stainless AISI 304 steel friction drilling process. Mechanika 20(6), 590–595 (2014). https://doi.org/10.5755/j01.mech.20.6.8664CrossRef

50.

Tounsi, N., Vincenti, J., Otho, A., Elbestawi, M.A.: From the basic mechanics of orthogonal metal cutting toward the identification of the constitutive equation. Int. J. Mach. Tools Manuf. 42, 12 (2002). https://doi.org/10.1016/S0890-6955(02)00046-9CrossRef

51.

Gupta, N.K., Iqbal, M.A., Sekhon, G.S.: Experimental and numerical studies on the behavior of thin aluminum plates subjected to impact by blunt- and hemispherical-nosed projectiles. Int. J. Impact Eng. 32(12), 1921–1944 (2006). https://doi.org/10.1016/j.ijimpeng.2005.06.007CrossRef

52.

Johnson, G.R., Cook, W.H.: Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng. Fract. Mech. 21, 31–48 (1985). https://doi.org/10.1016/0013-7944(85)90052-9CrossRef

53.

Khurshudov, A., Kato, K.: Wear of the atomic force microscope tip under light load, studied by atomic force microscopy. Ultramicroscopy 60, 11–16 (1995). https://doi.org/10.1016/0304-3991(95)00071-8CrossRef

54.

Chung, K.-H., Kim, D.-E.: Fundamental investigation of micro wear rate using an atomic force microscope. Tribol. Lett. 15, 135–144 (2003). https://doi.org/10.1023/A:1024457132574CrossRef

55.

Chung, K.-H., Lee, Y.-H., Kim, D.-E.: Characteristics of fracture during the approach process and wear mechanism of a silicon AFM tip. Ultramicroscopy 102, 161–171 (2005). https://doi.org/10.1016/j.ultramic.2004.09.009CrossRef

56.

Tao, Z., Bhushan, B.: Surface modification of AFM silicon probes for adhesion and wear reduction. Tribol. Lett. 21, 1–16 (2006). https://doi.org/10.1007/s11249-005-9001-8CrossRef

57.

Norman, T.L., Nivargikar, S.V., Burr, D.B.: Resistance to crack growth in human cortical bone is greater in shear than in tension. J. Biomech. 29(8), 1023–1031 (1996). https://doi.org/10.1016/0021-9290(96)00009-7CrossRef

58.

Tarigopula, V., Hopperstad, O.S., Langseth, M., Clausen, A.H., Hild, F., Lademo, O.-G., Eriksson, M.: A study of large plastic deformations in dual phase steel using digital image correlation and fe analysis. Exp. Mech. 48, 181–196 (2008). https://doi.org/10.1007/s11340-007-9066-4CrossRef

59.

An, Y.G., Vegter, H., Heijne, J.: Development of simple shear test for the measurement of work hardening. J. Mater. Proc. Technol. 209, 4248–4254 (2009). https://doi.org/10.1016/j.jmatprotec.2008.11.007CrossRef

60.

Yin, Q., Zillmann, B., Suttner, S., Gerstein, G., Biasutti, M., Tekkaya, A.E., Wagner, M.F.-X., Merklein, M., Schaper, M., Halle, T., Brosius, A.: An experimental and numerical investigation of different shear test configurations for sheet metal characterization. Int. J. Solids Struct. 51, 1066–1074 (2014). https://doi.org/10.1016/j.ijsolstr.2013.12.006CrossRef

61.

Yin, Q., Soyarslan, C., Isik, K., Tekkaya, A.E.: A grooved in-plane torsion test for the investigation of shear fracture in sheet materials. Int. J. Solids Struct. 66, 121–132 (2015). https://doi.org/10.1016/j.ijsolstr.2015.03.032CrossRef

62.

Jia, L.-J., Ikai, T., Shinohara, K., Ge, H.: Ductile crack initiation and propagation of structural steels under cyclic combined shear and normal stress loading. Construct. Build. Mater. 112, 69–83 (2016). https://doi.org/10.1016/j.conbuildmat.2016.02.171CrossRef

63.

Gorji, M.B., Mohr, D.: Micro-tension and micro-shear experiments to characterize stress-state dependent ductile fracture. Acta Mater. 131, 65–76 (2017). https://doi.org/10.1016/j.actamat.2017.03.034CrossRef

64.

Starman, B., Vrhb, M., Koca, P., Halilovic, M.: Shear test-based identification of hardening behaviour of stainless steel sheet after onset of necking. J. Mater. Proc. Technol. 270, 335–344 (2019). https://doi.org/10.1016/j.jmatprotec.2019.03.010CrossRef

65.

Liu, Y., Kang, L., Ge, H.: Experimental and numerical study on ductile fracture of structural steels under different stress states. J. Construct. Steel Res. 158, 381–404 (2019). https://doi.org/10.1016/j.jcsr.2019.04.001CrossRef

66.

Xing, J., Qiu, C., Wang, M., Yang, N.: Uniaxial failure mechanism and design strength of high-strength welded hollow spherical joint. Eng. Struct. 256, 113897 (2020). https://doi.org/10.1016/j.engstruct.2022.113897CrossRef

67.

Huang, X., Ge, J., Zhao, J., Zhao, W.: A continuous damage model of q690d steel considering the influence of lode parameter and its application. Construct. Build. Mater. 262, 120067 (2020). https://doi.org/10.1016/j.conbuildmat.2020.120067CrossRef

68.

Zhu, Y., Kiran, R., Xing, J., Pan, Z., Li, L.: A modified micromechanics framework to predict shear involved ductile fracture in structural steels at intermediate and low-stress triaxialities. Eng. Fract. Mech. 225, 106860 (2020). https://doi.org/10.1016/j.engfracmech.2019.106860CrossRef

69.

Aghababaei, R., Malekan, M., Budzik, M.: Cutting depth dictates the transition from continuous to segmented chip formation. Phys. Rev. Lett. 127, 235502 (2021). https://doi.org/10.1103/PhysRevLett.127.235502CrossRef

70.

Zhu, P., Zhang, Q., Xu, H., Ouyang, Y.: Experimental and numerical investigation on plasticity and fracture behaviors of aluminum alloy 6061–t6 extrusions. Arch. Civ. Mech. Eng. 21, 88 (2021). https://doi.org/10.1007/s43452-021-00225-3CrossRef

71.

Qin, S., Novak, T.C., Vailhe, M.K., Liu, Z.-K., Beese, A.M.: Plasticity and fracture behavior of inconel 625 manufactured by laser powder bed fusion: comparison between as-built and stress relieved conditions. Mater. Sci. Eng. A 806, 140808 (2021). https://doi.org/10.1016/j.msea.2021.140808CrossRef

72.

Reyne, B., Herault, D., Thuillier, S., Manach, P.-Y.: Quality of the strain state in simple shear testing using field measurement techniques. Int. J. Mech. Sci. 208, 106660 (2021). https://doi.org/10.1016/j.ijmecsci.2021.106660CrossRef

73.

Tancogne-Dejean, T., Roth, C.C., Morgeneyer, T.F., Helfen, L., Mohr, D.: Ductile damage of AA2024-T3 under shear loading: mechanism analysis through in-situ laminography. Acta Mater. 205, 116556 (2021). https://doi.org/10.1016/j.actamat.2020.116556CrossRef

74.

Bucci, R.H.: ASM Handbook, Volume 19: Fatigue and Fracture (1996)

75.

Svoboda, A., Wedberg, D., Lindgren, L.-E.: Simulation of metal cutting using a physically based plasticity model. Model. Simul. Mater. Sci. Eng. 18, 075005 (2010). https://doi.org/10.1088/0965-0393/18/7/075005CrossRef

76.

Delrio, F.W., Boer, M.P.D., Knapp, J.A., Clews, P.J., Dunn, M.L.: The role of van der waals forces in adhesion of micromachined surfaces. Nat. Mater. 4, 629–634 (2005). https://doi.org/10.1038/nmat1431CrossRef

77.

Lubrecht, A.A., Dwyer-Joyce, R.S., Ioannides, E.: Analysis of the influence of indentations on contact life. In: Dowson, D., Taylor, C.M., Godet, M. (eds.) Proceedings of the 18th Leeds-Lyon Symposium on Tribology (Wear Particles - from the Cradle to the Grave). Elsevier, Amsterdam (1990)

Titel: Transition from Plastic Shearing to Fracture of Asperity Junctions: Role of a Critical Aspect Ratio
verfasst von: Mohammad Malekan
Publikationsdatum: 01.03.2023
Verlag: Springer US
Erschienen in: Tribology Letters / Ausgabe 1/2023
Print ISSN: 1023-8883
Elektronische ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-023-01699-3

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2023

On the Elastohydrodynamic Film-Forming Properties of Metalworking Fluids and Oil-in-Water Emulsions

Application of Tribological Artificial Neural Networks in Machine Elements

Nano and Sub-nano Scale Friction Behavior in Rotary Processing of 6H-SiC with Different Off-Axis Angles

Dependency of Lithium Complex Grease on the Size of hBN Particles for Enhanced Performance

Correction to: Activation Volume in Shear-Driven Chemical Reactions

Experimental and Finite Element Analysis of Plastic Domain Evolution of Wavy Surfaces During Contact

Premium Partner

Marktübersichten