nach oben

International Journal on Interactive Design and Manufacturing (IJIDeM)

Erschienen in:

16.08.2022 | Original Paper

Parametric study and optimization of specific wear of a novel porcine bone reinforced hybrid composite on dry sliding wear apparatus: a RSM based design approach

verfasst von: Iti Dikshit, Gian Bhushan

Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Ausgabe 5/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Tribological property like specific wear play a significant role in the development of composites, and composites with improved tribological properties are desirable. In the present work a novel composite was prepared using the powder of the porcine bones (which are treated as biological waste) as the filler, and alkali-treated jute fiber. The specific wear of the developed hybrid composites has not yet been explored. Therefore, an attempts has been made to determine the effect of various dry sliding parameters namely, sliding velocity, sliding distance, and normal load, on the surface topography and specific wear of the developed hybrid composite. 20 experimental runs were performed on the basis of Central composite design (CCD) and Response surface methodology (RSM) was used to develop the statistical model for predicting the specific wear. Analysis of variance (ANOVA) was performed at a confidence interval of 95% to study the influence of significant parameters (p < 0.05) on specific wear (W_r). The study revealed that the sliding distance had the most significant influence of 38.5% on specific wear. Whereas, normal load had 18.6% indolence on W_r, and sliding velocity was 16.8%. Optimization was performed using genetic algorithm toolbox and it was found that the specific wear of the developed composite was reduced by 36.8%.

Vorheriger Artikel Non-traditional tolerance design techniques for low machining cost

Nächster Artikel Numerical simulation of sand–water slurry flow through pipe bend using CFD

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Zhang, S.W.: State-of-the-art of polymer tribology. Tribol. Int. 31, 49–60 (1998). https://doi.org/10.1016/S0301-679X(98)00007-3CrossRef

Singh, S., Singh, G., Prakash, C., Ramakrishna, S.: Current status and future directions of fused filament fabrication. J. Manuf. Process. 55, 288–306 (2020). https://doi.org/10.1016/j.jmapro.2020.04.049CrossRef

Singh, S., Singh, G., Prakash, C., Ramakrishna, S., Lamberti, L., Pruncu, C.I.: 3D printed biodegradable composites: an insight into mechanical properties of PLA/chitosan scaffold. Polym. Test. 89, 106722 (2020). https://doi.org/10.1016/j.polymertesting.2020.106722CrossRef

El-Tayeb, N.S.M.: Two-body abrasive behaviour of untreated SC and R-G fibres polyester composites. Wear 266, 220–232 (2009). https://doi.org/10.1016/j.wear.2008.06.018CrossRef

Almeida Jr, J.H.S., Amico, S.C., Botelho, E.C., Amado, F.D.R.: Hybridization effect on the mechanical properties of curaua/glass fiber composites. Compos. Part B Eng. 55, 492–497 (2013). https://doi.org/10.1016/j.compositesb.2013.07.014CrossRef

Kumar, G.R., Hariharan, V., Saravanakumar, S.S.: Enhancing the free vibration characteristics of epoxy polymers using sustainable phoenix sp. fibers and nano-clay for machine tool applications. J. Nat. Fibers. 18, 531–538 (2021). https://doi.org/10.1080/15440478.2019.1636740CrossRef

Veerasimman, A., Shanmugam, V., Rajendran, S., Johnson, D.J., Subbiah, A., Koilpichai, J., Marimuthu, U.: Thermal properties of natural fiber sisal based hybrid composites–a brief review. J. Nat. Fibers. 00, 1–11 (2021). https://doi.org/10.1080/15440478.2020.1870619CrossRef

Suriani, M.J., Ilyas, R.A., Zuhri, M.Y.M., Khalina, A., Sultan, M.T.H., Sapuan, S.M., Ruzaidi, C.M., Wan, F.N., Zulkifli, F., Harussani, M.M.: Critical review of natural fiber reinforced hybrid composites: processing, properties, applications and cost. Polymers (Basel). 13, 3514 (2021). https://doi.org/10.3390/polym13203514CrossRef

Pandey, A., Singh, G., Singh, S., Jha, K., Prakash, C.: 3D printed biodegradable functional temperature-stimuli shape memory polymer for customized scaffoldings. J. Mech. Behav. Biomed. Mater. 108, 103781 (2020). https://doi.org/10.1016/j.jmbbm.2020.103781CrossRef

10.

Mohanavel, V., Raja, T., Yadav, A., Ravichandran, M., Winczek, J.: Evaluation of mechanical and thermal properties of jute and ramie reinforced epoxy-based hybrid composites. J. Nat. Fibers. 00, 1–11 (2021). https://doi.org/10.1080/15440478.2021.1958432CrossRef

11.

Agrebi, F., Hammami, H., Asim, M., Jawaid, M., Kallel, A.: Impact of silane treatment on the dielectric properties of pineapple leaf/kenaf fiber reinforced phenolic composites. J. Compos. Mater. 54, 937–946 (2020). https://doi.org/10.1177/0021998319871351CrossRef

12.

Kamble, Z., Behera, B.K.: Sustainable hybrid composites reinforced with textile waste for construction and building applications. Constr. Build. Mater. 284, 122800 (2021). https://doi.org/10.1016/j.conbuildmat.2021.122800CrossRef

13.

Prakash, C., Singh, G., Singh, S., Linda, W.L., Zheng, H.Y., Ramakrishna, S., Narayan, R.: Mechanical reliability and in vitro bioactivity of 3D-printed porous polylactic acid-hydroxyapatite scaffold. J. Mater. Eng. Perform. 30, 4946–4956 (2021)CrossRef

14.

Subramanian, K., Nagarajan, R., Sukumaran, J., Thangiah, W., De Baets, P.: Dry sliding wear properties of Jute/polymer composites in high loading applications. In: Synergy 2015 international conference. pp. 7–18. Szent István University. Faculty of Mechanical Engineering (2015).

15.

Durowaye, S., Lawal, G., Sekunowo, O.: Synthesis and characterization of hybrid polypropylene matrix composites reinforced with carbonized Terminalia catappa shell particles and Turritela communis shell particles. J. Taibah Univ. Sci. ISSN (2018). https://doi.org/10.1080/16583655.2018.1451112CrossRef

16.

Jagadeesh, V., Venkatasubbaiah, K., Naidu, A.L.: Experimental study on mechanical behavior of natural hybrid composites filled with ground nut shell ash. Mech. Mech. Eng. 23, 218–227 (2019). https://doi.org/10.2478/mme-2019-0029CrossRef

17.

Prasad, V., Joy, A., Venkatachalam, G., Narayanan, S., Rajakumar, S.: Finite element analysis of jute and banana fibre reinforced hybrid polymer matrix composite and optimization of design parameters using ANOVA technique. Procedia Eng. 97, 1116–1125 (2014). https://doi.org/10.1016/j.proeng.2014.12.390CrossRef

18.

Baig, M.M.A., Samad, M.A.: Epoxy\epoxy composite\epoxy hybrid composite coatings for tribological applications—a review. Polymers (2021). https://doi.org/10.3390/polym13020179CrossRef

19.

Suresha, B.: The role of fillers on friction and slide wear characteristics in glass-epoxy composite systems. J. Miner. Mater. Charact. Eng. 5, 87 (2006). https://doi.org/10.4236/jmmce.2006.51006CrossRef

20.

Suresha, B., Chandramohan, G., Samapthkumaran, P., Seetharamu, S., Vynatheya, S.: Friction and wear characteristics of carbon-epoxy and glass-epoxy woven roving fiber composites. J. Reinf. Plast. Compos. 25, 771–782 (2006). https://doi.org/10.1177/0731684406063540CrossRef

21.

Das, S.C., Paul, D., Grammatikos, S.A., Siddiquee, M.A.B., Papatzani, S., Koralli, P., Islam, J.M.M., Khan, M.A., Shauddin, S.M., Khan, R.A.: Effect of stacking sequence on the performance of hybrid natural/synthetic fiber reinforced polymer composite laminates. Compos. Struct. 276, 114525 (2021). https://doi.org/10.1016/j.compstruct.2021.114525CrossRef

22.

Şap, E., Usca, U.A., Gupta, M.K., Kuntoğlu, M.: Tool wear and machinability investigations in dry turning of Cu/Mo-SiCp hybrid composites. Int. J. Adv. Manuf. Technol. 114, 379–396 (2021). https://doi.org/10.1007/s00170-021-06889-8CrossRef

23.

Basavarajappa, S., Ellangovan, S.: Dry sliding wear characteristics of glass-epoxy composite filled with silicon carbide and graphite particles. Wear 296, 491–496 (2012). https://doi.org/10.1016/j.wear.2012.08.001CrossRef

24.

Rajashekaraiah, H., Bheemappa, S., Yang, S.H., Mohan, S.: Abrasive wear behaviour of thermoplastic copolyester elastomer composites: a statistical approach. Int. J. Precis. Eng. Manuf. 17, 755–763 (2016). https://doi.org/10.1007/s12541-016-0093-xCrossRef

25.

Oledele, I.O., Isola, B.A.: Development of bone particulate reinforced epoxy composite for biomedical application. J. Appl. Biotechnol. Bioeng. (2016). https://doi.org/10.15406/jabb.2016.01.00006CrossRef

26.

Owuamanam, S., Cree, D.: Progress of bio-calcium carbonate waste eggshell and seashell fillers in polymer composites: a review. J. Compos. Sci. 4, 70 (2020). https://doi.org/10.3390/jcs4020070CrossRef

27.

Rajan, B.S., Balaji, M.A.S., AB, M.A.N.: Effect of silane surface treatment on the physico-mechanical properties of shell powder reinforced epoxy modified phenolic friction composite. Mater. Res. Express. 6, 65315 (2019). Doi: https://doi.org/10.1088/2053-1591/ab0ca5.

28.

Dikshit, I., Bhushan, G.: Development of an innovant carbon/jute porcine-bone hybrid material for sustainable composite manufacturing. Polym. Compos. 43, 2419–2430 (2022). https://doi.org/10.1002/pc.26551CrossRef

29.

Dikshit, I., Bhushan, G.: Experimental investigations and optimization of tensile and impact strength of a novel composite reinforced with carbon jute and porcine bone powder. Polym. Compos. 43, 3915–3928 (2022). https://doi.org/10.1002/pc.26666CrossRef

30.

Sezgin, H., Berkalp, O.B.: The effect of hybridization on significant characteristics of jute/glass and jute/carbon-reinforced composites. J. Ind. Text. 47, 283–296 (2017). https://doi.org/10.1177/1528083716644290CrossRef

31.

Baiardo, M., Zini, E., Scandola, M.: Flax fibre–polyester composites. Compos. Part A Appl. Sci. Manuf. 35, 703–710 (2004). https://doi.org/10.1016/j.compositesa.2004.02.004CrossRef

32.

Bajpai, P.K., Singh, I., Madaan, J.: Frictional and adhesive wear performance of natural fibre reinforced polypropylene composites. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 227, 385–392 (2013). https://doi.org/10.1177/1350650112461868CrossRef

33.

Yallew, T.B., Kumar, P., Singh, I.: Sliding wear properties of jute fabric reinforced polypropylene composites. Procedia Eng. 97, 402–411 (2014). https://doi.org/10.1016/j.proeng.2014.12.264CrossRef

34.

Batra, N., Singh, R.P., Dikshit, I.: Experimental investigations and statistical modeling of specific wear and coefficient of friction in a novel carbon fiber reinforced composite. Int. J. Surf. Eng. Interdiscip. Mater. Sci. 10, 1–17 (2021)

35.

Singh, S., Singh, G., Sandhu, K., Prakash, C., Singh, R.: Investigating the optimum parametric setting for MRR of expandable polystyrene machined with 3D printed end mill tool. Mater. Today Proc. 33, 1513–1517 (2020). https://doi.org/10.1016/j.matpr.2020.03.465CrossRef

36.

Singh, R.P., Mohan, P., Ranjan, A.: An in-vitro study of temperature rise during rotary ultrasonic bone drilling of human bone. Med. Eng. Phys. 79, 33–43 (2020). https://doi.org/10.1016/j.medengphy.2020.03.002CrossRef

37.

Singh, R.P., Pandey, P.M., Mridha, A.R., Joshi, T.: Experimental investigations and statistical modeling of cutting force and torque in rotary ultrasonic bone drilling of human cadaver bone. Proc. IMechE Part H J Eng. Med. 234, 148–162 (2020). https://doi.org/10.1177/0954411919889913CrossRef

38.

Kumar, R., Dikshit, I., Verma, A.: Experimental investigations and statistical modelling of dilution rate and area of penetration in submerged arc welding of SS316-L. Mater. Today Proc. 44, 3997–4003 (2020). https://doi.org/10.1016/j.matpr.2020.10.201CrossRef

39.

Batra, N.K., Singh, R.P., Dayal, S.: Experimental investigation and statistical modelling of cutting speed in AL6063-W composite by wire EDM process. Mater. Today Proc. 62, 1408–1412 (2022). https://doi.org/10.1016/j.matpr.2021.12.418CrossRef

40.

Pal Singh, R., Batra, N.K., Dayal, S.: Influence of machining parameters on surface roughness in AL6063-W composite by wire EDM process: experimental investigations and process optimization. Mater. Today Proc. 63, 192–196 (2022). https://doi.org/10.1016/j.matpr.2022.02.462CrossRef

41.

Montgomery, D.C.: Design and Analysis of Experiments Eighth Edition. (2013).

42.

Dikshit, I., Bhushan, G., Singh, R.P., Batra, N.K.: Statistical modeling and optimization of density in a novel carbon/jute fiber reinforced hybrid composite. Mater. Today Proc. 63, 259–263 (2022). https://doi.org/10.1016/j.matpr.2022.03.052CrossRef

43.

Rahiman, A.H.S., Smart, D.S.R., Wilson, B., Ebrahim, I., Eldhose, B., Mathew, B., Murickan, R.T.: Dry sliding wear analysis OF Al5083/CNT/Ni/MoB hybrid composite using DOE Taguchi method. Wear 460–461, 203471 (2020). https://doi.org/10.1016/j.wear.2020.203471CrossRef

44.

Sampathkumaran, P., Seetharamu, S., Vynatheya, S., Murali, A., Kumar, R.K.: SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers. Wear 237, 20–27 (2000). https://doi.org/10.1016/S0043-1648(99)00300-2CrossRef

45.

Wieleba, W.: The mechanism of tribological wear of thermoplastic materials. Arch. Civ. Mech. Eng. 7, 185–199 (2007). https://doi.org/10.1016/S1644-9665(12)60236-2CrossRef

46.

Kumaresan, K., Chandramohan, G., Senthilkumar, M., Suresha, B., Indran, S.: Dry sliding wear behaviour of carbon fabric-reinforced epoxy composite with and without silicon carbide. Compos. Interfaces. 18, 509–526 (2011). https://doi.org/10.1163/156855411X610241CrossRef

47.

Nayak, A., Jesthi, D.K., Routara, B.C., Das, D., Nayak, R.K.: Tribological properties of glass/carbon hybrid composites through inter-ply arrangement using response surface methodology. Mater. Today Proc. 5, 19828–19835 (2018). https://doi.org/10.1016/j.matpr.2018.06.346CrossRef

48.

Dass, K., Chauhan, S.R., Gaur, B.: Study on mechanical and dry sliding wear characteristics of meta-cresol novalac epoxy composites filled with silicon carbide, aluminum oxide, and zinc oxide particulates. Tribol. Trans. 57, 157–172 (2014). https://doi.org/10.1080/10402004.2013.861049CrossRef

Titel: Parametric study and optimization of specific wear of a novel porcine bone reinforced hybrid composite on dry sliding wear apparatus: a RSM based design approach
verfasst von: Iti Dikshit
Gian Bhushan
Publikationsdatum: 16.08.2022
Verlag: Springer Paris
Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Ausgabe 5/2023
Print ISSN: 1955-2513
Elektronische ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-022-00997-9

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 5/2023

Experimental and computational investigation of acoustophoretic effect in cylindrical vibro cleaner

Design and characterization of novel ternary nanocomposite (rGO-MnO2-PoPDA) product and screening its dielectric properties

Modelling and optimization of selective laser melting parameters using Taguchi and super ranking concept approaches

Reducing scrap due to missed operations and machining defects in 90PS pistons

Design and optimization of process parameters for hard turning of AISI 304 stainless steel using Taguchi-GRA-PCA

4D printing of thermoresponsive materials: a state-of-the-art review and prospective applications

Premium Partner