nach oben

Continuum Mechanics and Thermodynamics

Erschienen in:

24.10.2019 | Original Article

Phenomenon of skin effect in metals due to hydrogen absorption

verfasst von: V. A. Polyanskiy, A. K. Belyaev, E. L. Alekseeva, A. M. Polyanskiy, D. A. Tretyakov, Yu. A. Yakovlev

Erschienen in: Continuum Mechanics and Thermodynamics | Ausgabe 6/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Experimental studies of the distribution of hydrogen in metal samples after a standardized saturation procedure in a neutral solution are described. It is shown that the hydrogen concentrates in a thin surface layer which plays the role of a shield for the further propagation of hydrogen. We refer to this phenomenon as a skin effect in the hydrogen saturation since the internal regions of the metal are not saturated by hydrogen. A review of similar experimental results for other standardized methods for saturation of metals with hydrogen (cathodic polarization, saturation in gaseous hydrogen) is provided, and the universal nature of the skin effect for metals is shown. The analysis of mechanisms of the skin effect is carried out by methods of continuum mechanics based on a bi-continual model of a solid. The problem of saturating a metal sample with hydrogen without external load is posed. It is shown that the model taking into account the mutual influence of hydrogen and mechanical stresses allows one to obtain solutions describing the highly non-uniform distribution of hydrogen at standardized saturation.

Vorheriger Artikel Numerically driven tuning of equilibrium paths for pantographic beams

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique. ISO 17081:2014 International Organization for Standardization (2014). https://www.iso.org/standard/64514.html

Steel—measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels. ISO 16573:2015 International Organization for Standardization (2015). https://www.iso.org/standard/57128.html

Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking. TM0284-2106-SG ANSI/NACE Standard, NACE International, Houston, TX (2016). https://store.nace.org/ansi-nace-tm0284-2016

Transportable gas cylinders—compatibility of cylinder and valve materials with gas contents—part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement. ISO 11114-4:2017 International Organization for Standardization (2017). https://www.iso.org/standard/64587.html

Welding and allied processes—determination of hydrogen content in arc weld metal. ISO3690:2018 IIW International Institute of Welding (2018). https://www.iso.org/standard/72150.html

Akiyama, E., Li, S.: Electrochemical hydrogen permeation tests under galvanostatic hydrogen charging conditions conventionally used for hydrogen embrittlement study. Corros. Rev. 34(1–2), 103–112 (2016). https://doi.org/10.1515/corrrev-2015-0049 CrossRef

Andrew, J.H.: The embrittling of iron by caustic soda. Trans. Faraday Soc. 9, 316–329 (1914). https://doi.org/10.1039/TF9140900316 CrossRef

Andronov, D., Arseniev, D., Polyanskiy, A., Polyanskiy, V., Yakovlev, Y.: Application of multichannel diffusion model to analysis of hydrogen measurements in solid. Int. J. Hydrog. Energy 42(1), 699–710 (2017). https://doi.org/10.1016/j.ijhydene.2016.10.126 CrossRef

Belyaev, A., Polyanskiy, A., Polyanskiy, V., Sommitsch, C., Yakovlev, Y.A.: Multichannel diffusion vs TDS model on example of energy spectra of bound hydrogen in 34 Cr Ni Mo6 steel after a typical heat treatment. Int. J. Hydrog. Energy 41(20), 8627–8634 (2016). https://doi.org/10.1016/j.ijhydene.2016.03.198 CrossRef

10.

Belyaev, A., Polyanskiy, A.M., Polyanskiy, V.A., Yakovlev, Y.A.: An Approach to Modeling Structural Materials with Low Hydrogen Concentration, pp. 63–87. Springer International Publishing, Cham (2019). https://doi.org/10.1007/978-3-030-11665-1_4 CrossRef

11.

Belyaev, A.K., Kudinova, N.R., Polyanskiy, V.A., Yakovlev, Y.A.: The description of deformation and destruction of materials containing hydrogen by means of rheological model. St. Petersb. Polytech. Univ. J. Phys. Math. 1(3), 305–314 (2015). https://doi.org/10.1016/j.spjpm.2015.12.002 CrossRef

12.

Belyaev, A.K., Polyanskiy, V.A., Porubov, A.V.: Nonlinear dynamics of hydrogen concentration in high-strength and high-entropy alloys. Contin. Mech. Thermodyn. (2018). https://doi.org/10.1007/s00161-018-0734-7 CrossRef

13.

Bhadeshia, H.K.D.H.: Prevention of hydrogen embrittlement in steels. ISIJ Int. 56(1), 24–36 (2016). https://doi.org/10.2355/isijinternational.ISIJINT-2015-430 CrossRef

14.

Birnbaum, H., Sofronis, P.: Hydrogen-enhanced localized plasticity—a mechanism for hydrogen-related fracture. Mater. Sci. Eng., A 176(1–2), 191–202 (1994). https://doi.org/10.1016/0921-5093(94)90975-X CrossRef

15.

Brass, A., Chene, J.: Influence of deformation on the hydrogen behavior in iron and nickel base alloys: a review of experimental data. Mater. Sci. Eng., A 242(1), 210–221 (1998). https://doi.org/10.1016/S0921-5093(97)00523-6 CrossRef

16.

Capelle, J., Gilgert, J., Dmytrakh, I., Pluvinage, G.: Sensitivity of pipelines with steel api X52 to hydrogen embrittlement. Int. J. Hydrog. Energy 33(24), 7630–7641 (2008). https://doi.org/10.1016/j.ijhydene.2008.09.020 CrossRef

17.

Chan, S.L.I.: Hydrogen trapping ability of steels with different microstructures. J. Chin. Inst. Eng. 22(1), 43–53 (1999). https://doi.org/10.1080/02533839.1999.9670440 ADSCrossRef

18.

Chan, S.L.I., Charles, J.A.: Effect of carbon content on hydrogen occlusivity and embrittlement of ferrite–pearlite steels. Mater. Sci. Technol. 2(9), 956–962 (1986). https://doi.org/10.1179/mst.1986.2.9.956 CrossRef

19.

Chen, Y., Zheng, S., Zhou, J., Wang, P., Chen, L., Qi, Y.: Influence of H\(_2\)S interaction with prestrain on the mechanical properties of high-strength X80 steel. Int. J. Hydrog. Energy 41(24), 10412–10420 (2016). https://doi.org/10.1016/j.ijhydene.2016.01.144 CrossRef

20.

Cheng, Y.: Fundamentals of hydrogen evolution reaction and its implications on near-neutral pH stress corrosion cracking of pipelines. Electrochim. Acta 52(7), 2661–2667 (2007). https://doi.org/10.1016/j.electacta.2006.09.024 CrossRef

21.

Choo, W.Y., Lee, J.Y.: Thermal analysis of trapped hydrogen in pure iron. Metall. Trans. A 13(1), 135–140 (1982). https://doi.org/10.1007/BF02642424 CrossRef

22.

Choo, W.Y., Lee, J.Y., Cho, C.G., Hwang, S.H.: Hydrogen solubility in pure iron and effects of alloying elements on the solubility in the temperature range 20 to 500\(^\circ \) C. J. Mater. Sci. 16(5), 1285–1292 (1981). https://doi.org/10.1007/BF01033843 ADSCrossRef

23.

Delafosse, D., Magnin, T.: Interfaces in stress corrosion cracking: a case study in duplex stainless steels. In: Solid State Phenomena, vol. 59, pp. 221–250. Trans Tech Publ (1998)

24.

Delafosse, D., Magnin, T.: Hydrogen induced plasticity in stress corrosion cracking of engineering systems. Eng. Fract. Mech. 68(6), 693–729 (2001). https://doi.org/10.1016/S0013-7944(00)00121-1 CrossRef

25.

Depover, T., Wallaert, E., Verbeken, K.: On the synergy of diffusible hydrogen content and hydrogen diffusivity in the mechanical degradation of laboratory cast Fe- C alloys. Mater. Sci. Eng., A 664, 195–205 (2016). https://doi.org/10.1016/j.msea.2016.03.107 CrossRef

26.

Dmytrakh, I., Leshchak, R., Syrotyuk, A., Barna, R.: Effect of hydrogen concentration on fatigue crack growth behaviour in pipeline steel. Int. J. Hydrogen Energy 42(9), 6401–6408 (2017). https://doi.org/10.1016/j.ijhydene.2016.11.193 CrossRef

27.

Dunne, D.P., Hejazi, D., Saleh, A.A., Haq, A.J., Calka, A., Pereloma, E.V.: Investigation of the effect of electrolytic hydrogen charging of X70 steel: I the effect of microstructure on hydrogen-induced cold cracking and blistering. Int. J. Hydrogen Energy 41(28), 12411–12423 (2016). https://doi.org/10.1016/j.ijhydene.2016.04.114 CrossRef

28.

Embid, P., Baer, M.: Mathematical analysis of a two-phase continuum mixture theory. Continuum Mech. Thermodyn. 4(4), 279–312 (1992). https://doi.org/10.1007/BF01129333 ADSMathSciNetCrossRefMATH

29.

Farrell, K.: Cathodic hydrogen absorption and severe embrittlement in a high strength steel. Corrosion 26(3), 105–110 (1970). https://doi.org/10.5006/0010-9312-26.3.105 CrossRef

30.

Fernandes, P.J.L., Jones, D.R.H.: Mechanisms of liquid metal induced embrittlement. Int. Mater. Rev. 42(6), 251–261 (1997). https://doi.org/10.1179/imr.1997.42.6.251 CrossRef

31.

Gangloff, R.P.: Gaseous Hydrogen Embrittlement of Materials in Energy Technologies: Mechanisms, Modelling and Future Developments, Woodhead Publishing Series in Metals and Surface Engineering 52, vol. 2. Woodhead Publishing, Sawston (2012)CrossRef

32.

Gorsky, W.: Theorie der elastischen nachwirkung in ungeordneten mischkristallen (elastische nachwirkung zweiter art.). Physikalische Zeitschrift der Sowjetunion 8, 457–471 (1935)

33.

Gorsky, W.: Theorie der elastischen nachwirkung in ungeordneten mischkristallen von cuau. Physikalische Zeitschrift der Sowjetunion 8, 443–456 (1935)

34.

Hadam, U., Zakroczymski, T.: Absorption of hydrogen in tensile strained iron and high-carbon steel studied by electrochemical permeation and desorption techniques. Int. J. Hydrogen Energy 34(5), 2449–2459 (2009). https://doi.org/10.1016/j.ijhydene.2008.12.088 CrossRef

35.

Hadfield, R.: The occlusion of gases by metals. a general discussion. introductory address. Trans. Faraday Soc. 14, 173–191 (1919). https://doi.org/10.1039/TF9191400173 CrossRef

36.

Hassel, A., Merzlikin, S., Mingers, A., Georges, C., Flock, J., Bergers, K., Tomandl, A., Muhr, A., Zwettler, F.: Methodology of Hydrogen Measurements in Coated Steels. Publications Office of the European Union, Luxembourg (2013). https://doi.org/10.2777/10253

37.

Hirth, J.P.: Effects of hydrogen on the properties of iron and steel. Metall. Trans. A 11(6), 861–890 (1980). https://doi.org/10.1007/BF02654700 CrossRef

38.

Hu, Z., Fukuyama, S., Yokogawa, K., Okamoto, S.: Hydrogen embrittlement of a single crystal of iron on a nanometre scale at a crack tip by molecular dynamics. Modell. Simul. Mater. Sci. Eng. 7(4), 541 (1999)ADSCrossRef

39.

Jenkins, N., Hart, P., Parker, D.: An evaluation of rapid methods for diffusible weld hydrogen. Weld. J.-Incl. Wel. Res.Suppl. 76(1), 1–6 (1997)

40.

Johnson, W.H.: On some remarkable changes produced in iron and steel by the action of hydrogen and acids. Proc. R. Soc. Lond. 23(156–163), 168–179 (1874)

41.

Johnson, W.H.: On some remarkable changes produced in iron and steel by the action of hydrogen and acids. Nature 11(281), 393 (1875). https://doi.org/10.1038/011393a0 ADSCrossRef

42.

Kim, C.D., Loginow, A.W.: Techniques for investigating hydrogen-induced cracking of steels with high yield strength. Corosion 24(10), 313–318 (1968). https://doi.org/10.5006/0010-9312-24.10.313 CrossRef

43.

Kissinger, H.E.: Reaction kinetics in differential thermal analysis. Anal. Chem. 29(11), 1702–1706 (1957). https://doi.org/10.1021/ac60131a045 CrossRef

44.

Kolman, D.: A review of recent advances in the understanding of liquid metal embrittlement. Corrosion 75(1), 42–57 (2018). https://doi.org/10.5006/2904 CrossRef

45.

Konar, J., Banerjee, N.: Vacuum heating hydrogen determination in aluminium and aluminium alloys. NML Tech. J. 16(1–2), 18–19 (1974)

46.

Konopel’ko, L.A., Polyanskii, A.M., Polyanskii, V.A., Yakovlev, Y.A.: New metrological support for measurements of the concentration of hydrogen in solid samples. Meas. Tech. 60(12), 1222–1227 (2018). https://doi.org/10.1007/s11018-018-1343-3 CrossRef

47.

Kudinova, N.R., Polyanskiy, V.A., Polyanskiy, A.M., Yakovlev, Y.A.: Contribution of surface tension energy during plastic deformation of nanomaterials. Dokl. Phys. 61(10), 514–516 (2016). https://doi.org/10.1134/S1028335816100104 ADSCrossRef

48.

Kuduzovic, A., Poletti, M., Sommitsch, C., Domankova, M., Mitsche, S., Kienreich, R.: Investigations into the delayed fracture susceptibility of 34crnimo6 steel, and the opportunities for its application in ultra-high-strength bolts and fasteners. Mater. Sci. Eng., A 590, 66–73 (2014). https://doi.org/10.1016/j.msea.2013.10.019 CrossRef

49.

Leeuwen, H.V.: The kinetics of hydrogen embrittlement: A quantitative diffusion model. Eng. Fract. Mech. 6(1), 141–161 (1974). https://doi.org/10.1016/0013-7944(74)90053-8 CrossRef

50.

Lexcellent, C., Gay, G., Chapelle, D.: Thermomechanics of a metal hydride-based hydrogen tank. Contin. Mech. Thermodyn. 27(3), 379–397 (2015). https://doi.org/10.1007/s00161-014-0356-7 ADSCrossRef

51.

Li, J., Oriani, R., Darken, L.: The thermodynamics of stressed solids. Zeitschrift für Physikalische Chemie 49(3–5), 271–290 (1966). https://doi.org/10.1524/zpch.1966.49.3_5.271 CrossRef

52.

Lunarska, E.: Changes in the strain hardening rate of iron and steel during absorption and desorption of hydrogen under cathodic charging and discharging conditions. Scr. Metall. 15(10), 1077–1082 (1981). https://doi.org/10.1016/0036-9748(81)90161-7 CrossRef

53.

Lunarska, E., Flis, J.: Effect of hydrogen charging–discharging on the stress-strain relationship for nickel. Scr. Metall. 18(9), 889–892 (1984). https://doi.org/10.1016/0036-9748(84)90255-2 CrossRef

54.

Lynch, S.: A fractographic study of gaseous hydrogen embrittlement and liquid-metal embrittlement in a tempered-martensitic steel. In: M. Ashby, J. Hirth (eds.) Perspectives in Hydrogen in Metals, pp. 739–750. Pergamon, Oxford (1986). https://doi.org/10.1016/B978-0-08-034813-1.50103-0 CrossRef

55.

Martinsson, Å., Sandström, R.: Hydrogen depth profile in phosphorus-doped, oxygen - free copper after cathodic charging. J. Mater. Sci. 47(19), 6768–6776 (2012). https://doi.org/10.1007/s10853-012-6592-y ADSCrossRef

56.

Mine, Y., Koga, K., Takashima, K., Horita, Z.: Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging. Mater. Sci. Eng., A 661, 87–95 (2016). https://doi.org/10.1016/j.msea.2016.03.018 CrossRef

57.

Momotani, Y., Shibata, A., Terada, D., Tsuji, N.: Effect of strain rate on hydrogen embrittlement in low-carbon martensitic steel. Int. J. Hydrogen Energy 42(5), 3371–3379 (2017). https://doi.org/10.1016/j.ijhydene.2016.09.188 CrossRef

58.

Newman, J., Shreir, L.: The effect of temperature upon the solubility and diffusion coefficient of cathodic H2 in steel. Corros. Sci. 11(1), 25–33 (1971). https://doi.org/10.1016/S0010-938X(71)80071-9 CrossRef

59.

Nicholas, M.G., Old, C.F.: Liquid metal embrittlement. J. Mater. Sci. 14(1), 1–18 (1979). https://doi.org/10.1007/BF01028323 ADSCrossRef

60.

Niu, L., Cheng, Y.: Corrosion behavior of X-70 pipe steel in near-neutral p H solution. Appl. Surf. Sci. 253(21), 8626–8631 (2007). https://doi.org/10.1016/j.apsusc.2007.04.066 ADSCrossRef

61.

Omura, T., Nakamura, J., Hirata, H., Jotoku, K., Ueyama, M., Osuki, T., Terunuma, M.: Effect of surface hydrogen concentration on hydrogen embrittlement properties of stainless steels and ni based alloys. ISIJ Int. 56(3), 405–412 (2016). https://doi.org/10.2355/isijinternational.ISIJINT-2015-268 CrossRef

62.

Oriani, R.: The diffusion and trapping of hydrogen in steel. Acta Metall. 18(1), 147–157 (1970). https://doi.org/10.1016/0001-6160(70)90078-7 CrossRef

63.

Pearson, W.: Chapter V - miscellaneous aspects of lattice–spacing variation. In: W. Pearson (ed.) A Handbook of Lattice Spacings and Structures of Metals and Alloys, International Series of Monographs on Metal Physics and Physical Metallurgy, vol. 4, pp. 68 – 75. Pergamon (1958). https://doi.org/10.1016/B978-1-4832-1318-7.50009-7 CrossRef

64.

Petushkov, E., Tserfas, A., Maksumov, T.: Determination of hydrogen in molybdenum by a diffusion–manometric method. In: U. Arifov (ed.) Secondary Emission and Structural Properties of Solids, pp. 107–109. Springer US (1971). https://doi.org/10.1007/978-1-4684-7212-7_27 CrossRef

65.

Polyanskiy, A., Polyanskiy, V., Yakovlev, Y.A.: Experimental determination of parameters of multichannel hydrogen diffusion in solid probe. Int. J. Hydrogen Energy 39(30), 17381–17390 (2014). https://doi.org/10.1016/j.ijhydene.2014.07.080 CrossRef

66.

Pressouyre, G.: Trap theory of hydrogen embrittlement. Acta Metall. 28(7), 895–911 (1980). https://doi.org/10.1016/0001-6160(80)90106-6 CrossRef

67.

Ramunni, V., Coelho, T.D.P., de Miranda, P.: Interaction of hydrogen with the microstructure of low-carbon steel. Mater. Sci. Eng., A 435–436, 504–514 (2006). https://doi.org/10.1016/j.msea.2006.07.089 CrossRef

68.

Robertson, I.: The effect of hydrogen on dislocation dynamics. Eng. Fract. Mech. 68(6), 671–692 (2001). https://doi.org/10.1016/S0013-7944(01)00011-X CrossRef

69.

Ryu, J.H., Chun, Y.S., Lee, C.S., Bhadeshia, H., Suh, D.W.: Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel. Acta Mater. 60(10), 4085–4092 (2012). https://doi.org/10.1016/j.actamat.2012.04.010 CrossRef

70.

Sanchez, J., Lee, S., Martin-Rengel, M., Fullea, J., Andrade, C., Ruiz-Herväs, J.: Measurement of hydrogen and embrittlement of high strength steels. Eng. Fail. Anal. 59, 467–477 (2016). https://doi.org/10.1016/j.engfailanal.2015.11.001 CrossRef

71.

Sayi, Y., Ramakumar, K., Prasad, R., Yadav, C., Shankaran, P., Chhapru, G., Jain, H.: Determination of H\(_2\) and D\(_2\) content in metals and alloys using hot vacuum extraction. J. Radioanal. Nucl. Chem. 230(1–2), 5–9 (1998). https://doi.org/10.1007/BF02387438 CrossRef

72.

Schaller, R., Scully, J.: Spatial determination of diffusible hydrogen concentrations proximate to pits in a Fe- Cr- Ni- Mo steel using the scanning kelvin probe. Electrochem. Commun. 63, 5–9 (2016). https://doi.org/10.1016/j.elecom.2015.12.002 CrossRef

73.

Sofronis, P., Liang, Y., Aravas, N.: Hydrogen induced shear localization of the plastic flow in metals and alloys. Eur. J. Mech. A. Solids 20(6), 857–872 (2001). https://doi.org/10.1016/S0997-7538(01)01179-2 CrossRefMATH

74.

Song, J., Curtin, W.: A nanoscale mechanism of hydrogen embrittlement in metals. Acta Mater. 59(4), 1557–1569 (2011). https://doi.org/10.1016/j.actamat.2010.11.019 CrossRef

75.

Varias, A., Massih, A.: Simulation of hydrogen embrittlement in zirconium alloys under stress and temperature gradients. J. Nucl. Mater. 279(2–3), 273–285 (2000). https://doi.org/10.1016/S0022-3115(99)00286-X ADSCrossRef

76.

Varias, A., Massih, A.: Hydride-induced embrittlement and fracture in metals—effect of stress and temperature distribution. J. Mech. Phys. Solids 50(7), 1469–1510 (2002). https://doi.org/10.1016/S0022-5096(01)00117-X ADSCrossRefMATH

77.

Williams, D.P., Nelson, H.G.: Embrittlement of 4130 steel by low-pressure gaseous hydrogen. Metall. Trans. 1(1), 63–68 (1970). https://doi.org/10.1007/BF02819243 CrossRef

78.

Wu, R., Ahlström, J., Magnusson, H., Frisk, K., Martinsson, A.: Charging, degassing and distribution of hydrogen in cast iron. Swerea KIMAB pp. 1–41 (2015). http://www.skb.com/publication/2480147/R-13-45.pdf

79.

Wu, T.I., Wu, J.C.: Effects of cathodic charging and subsequent solution treating parameters on the hydrogen redistribution and surface hardening of Ti–6 Al–4 V alloy. J. Alloy. Compd. 466(1), 153–159 (2008). https://doi.org/10.1016/j.jallcom.2007.11.045 CrossRef

80.

Yagodzinskyy, Y., Todoshchenko, O., Papula, S., Hänninen, H.: Hydrogen solubility and diffusion in austenitic stainless steels studied with thermal desorption spectroscopy. Steel Res. Int. 82(1), 20–25 (2011). https://doi.org/10.1002/srin.201000227 CrossRef

81.

Yamabe, J., Awane, T., Matsuoka, S.: Elucidating the hydrogen-entry-obstruction mechanism of a newly developed aluminum-based coating in high-pressure gaseous hydrogen. Int. J. Hydrogen Energy 40(32), 10329–10339 (2015). https://doi.org/10.1016/j.ijhydene.2015.06.023 CrossRef

Titel: Phenomenon of skin effect in metals due to hydrogen absorption
verfasst von: V. A. Polyanskiy
A. K. Belyaev
E. L. Alekseeva
A. M. Polyanskiy
D. A. Tretyakov
Yu. A. Yakovlev
Publikationsdatum: 24.10.2019
Verlag: Springer Berlin Heidelberg
Erschienen in: Continuum Mechanics and Thermodynamics / Ausgabe 6/2019
Print ISSN: 0935-1175
Elektronische ISSN: 1432-0959
DOI: https://doi.org/10.1007/s00161-019-00839-2

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 6/2019

An equilibrium of a micropolar elastic rectangle with mixed boundary conditions

Nonlinear travelling strain waves in a gradient-elastic medium

Fractional heat conduction in solids connected by thin intermediate layer: nonperfect thermal contact

Robust four-node elements based on Hu–Washizu principle for nonlinear analysis of Cosserat shells

Vibration suppression of a boron nitride nanotube under a moving nanoparticle using a classical optimal control procedure

Stability of elastic cylindrical tube with surface stresses

Premium Partner

Marktübersichten