nach oben

Cellulose

Erschienen in:

08.11.2022 | Original Research

Pin groove compressive performance of laminated bamboo lumber at different angles

verfasst von: Haitao Li, Tianyu Gao, Gensheng Cheng, Rodolfo Lorenzo

Erschienen in: Cellulose | Ausgabe 1/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this paper, two kinds of laminated bamboo lumber specimens with 7 groups of fiber angles on plane A and B were designed. The effects of different angles on the compressive strength and stiffness of laminated bamboo lumber were analyzed. According to the test results, the load displacement curves, ultimate strength values and initial stiffness of all specimens were obtained. The compressive strength test values of pin groove based on American Standard 5% diameter offset method were obtained. The results demonstrated that the compressive strength of the pin groove of laminated bamboo lumber obtained by 5% diameter offset method was relatively uniform. The compressive strength of class A pin groove decreased with the increase of angle. The coefficient of variation was within 9.42%, and the standard deviation within 6.33. The compressive strength of class B pin groove first decreased and then increased with the increase of angle. The coefficient of variation was within 12.10%, and the standard deviation within 6.67. The relationship between different fiber angles and the compressive performance of laminated bamboo lumber were analyzed, and the test results were compared with the theoretical formula calculated in the European wood structure and American wood structure design standards. The calculation model of pin groove compressive strength with different fiber angles was put forward.

Vorheriger Artikel Routes to improve the strengthening of paper with aminoalkylalkoxysilanes

Nächster Artikel Rapid identification of bast fibers in ancient handmade papers based on improved characterization of lignin monomers by Py-GCxGC/MS

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

American National Standards Institute (2012) National design specification for wood construction: NDS-2015. Washington, D.C: American Forest and Paper Association

American Society for Testing and Materials (2013) Standard test method for evaluating dowel-bearing strength of wood and wood-based products: ASTM D5764–97. West Conshohocken: ASTM

Assima D, Haitao L, Zhenhua X, Rodolfo L (2021) A review of mechanical behavior of structural laminated bamboo lumber. Sustain Struct 1(1):000004. https://doi.org/10.54113/j.sust.2021.000004CrossRef

British Standards Institution (2014) BS EN 1995‐1‐1: 2004+ A2: 2014. Eurocode 5: design of timber structures–Part 1–1: General–Common rules and rules for buildings.

Chen G, Jiang H, Yu YF, Zhou T, Li X (2020) Experimental analysis of nailed LBL-to-LBL connections loaded parallel to grain. Mater Struct 53(4):1–13. https://doi.org/10.1617/s11527-020-01517-5CrossRef

Chen W (2015) Mechanical properties analysis and experimental study of laminated bamboo lumber unidirectional bias component. Southeast University

Corbi O, Baratta A, Corbi I, Tropeano F, Liccardo E (2021) Design issues for smart seismic isolation of structures: past and recent research. Sustain Struct 1(1):000001. https://doi.org/10.54113/j.sust.2021.000001CrossRef

Ferdous W, Bai Y, Ngo TD, Manalo A, Mendis P (2019) New advancements, challenges and opportunities of multi-storey modular buildings–A state-of-the-art review. Eng Struct 183:883–893CrossRef

Ministry of Construction, PRC (2017) GB 50005-2017, Standard for design of timber structures

Ministry of Construction, PRC (2012) GB/T 50708–2012, Technical code of glued laminated timber structures

Itani R Y, Faherty K F (1984) Structural wood research: state-of-the-art and research needs. ASCE

Lei W, Zhang Y, Yu W, Yu Y (2021) The adsorption and desorption characteristics of moso bamboo induced by heat treatment. J Renewable Mater 6(3):41–46. https://doi.org/10.13360/j.issn.2096-1359.202009024CrossRef

Leng Y, Xu Q, Harries KA, Chen L, Liu K, Chen X (2020) Experimental study on mechanical properties of laminated bamboo beam-to-column connections. Eng Struct 210:110305. https://doi.org/10.1016/j.engstruct.2020.110305CrossRef

Leonel M, Rodolfo L, Li H (2022) An innovative digital workflow to design, build and manage bamboo structures. Sustain Struct 2(1):000011. https://doi.org/10.54113/j.sust.2022.000011CrossRef

Li YJ, Lou ZC (2021) Progress of bamboo flatten technology research. J for Eng 6(4):14–23. https://doi.org/10.13360/j.issn.2096-1359.202012021CrossRef

Li H, Zhang Q, Wu G, Xiong X, Li Y (2016) A review on development of laminated bamboo lumber. Journal of Forestry Engineering 1(6):10–16

Li H, Qiu Z, Wu G, Wei D, Lorenzo R, Yuan C (2019) Compression behaviors of parallel bamboo strand lumber under static loading. J Renewable Mater 7(7):583–600. https://doi.org/10.32604/jrm.2019.07592CrossRef

Li H, Chen B, Fei B, Xiong Z, Lorenzo R, Ashraf M (2022) Mechanical properties of aramid fiber reinforced polymer confined laminated bamboo lumber column under cyclic loading. Eur J Wood Wood Prod 80:1057–1070. https://doi.org/10.1007/s00107-022-01816-4CrossRef

Li X Z (2013) Research on bearing performance of bolt joint for recombinant bamboo. Chinese Academy of Forestry, Beijing, China

Liu J, Zhou AP, Sheng BL, Liu YY, Sun LW (2021) Effect of temperature on short-term compression creep property of bamboo scrimber. J for Eng 6(2):64–69. https://doi.org/10.13360/j.issn.2096-1359.202006003CrossRef

Lou ZC, Yang LT, Zhang AW, Shen D, Liu J, Yang L, Li Y (2020) Influence of saturated steam heat treatment on the bamboo color. J for Eng 5(4):38–44

Lv Q, Ding Y, Liu Y (2019) Study of the bond behaviour between basalt fibre-reinforced polymer bar/sheet and bamboo engineering materials. Adv Struct Eng 22(14):3121–3133CrossRef

Mahdavi M, Clouston PL, Arwade SR (2011) Development of laminated bamboo lumber: review of processing, performance, and economical considerations. J Mater Civ Eng 23(7):1036–1042. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000253CrossRef

Mahmud A, Mohammad JH, Safat A (2021) Semi-rigid behaviour of stainless steel beam-to-column bolted connections. Sustain Struct 1(1):000002. https://doi.org/10.54113/j.sust.2021.000002CrossRef

Pradhan NPN, Paraskeva TS, Dimitrakopoulos EG (2019) Quasi-static reversed cyclic testing of multi-culm bamboo members with steel connectors. Journal of Building Engineering 27:100983. https://doi.org/10.1016/j.jobe.2019.100983CrossRef

Qi JQ, Xie JL, Huang XY, Yu WJ, Chen SM (2014) Influence of characteristic inhomogeneity of bamboo culm on mechanical properties of bamboo plywood: effect of culm height. J Wood Sci 60(6):396–402. https://doi.org/10.1007/s10086-014-1429-8CrossRef

Quenneville JHP, Mohammad M (2000) On the failure modes and strength of steel-wood-steel bolted timber connections loaded parallel-to-grain. Can J Civ Eng 27(4):761–773. https://doi.org/10.1139/l00-020CrossRef

Ramirez F, Correal JF, Yamin LE, Atoche JC, Piscal CM (2012) Dowel-bearing strength behavior of glued laminated Guadua bamboo. J Mater Civ Eng 24(11):1378–1387. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000515CrossRef

Rassiah K, Ahmad MMHM, Ali A (2013) Mechanical properties of laminated bamboo strips from Gigantochloa Scortechinii polyester composites. Mater Des 57:551–559. https://doi.org/10.1016/j.matdes.2013.12.070CrossRef

Richard MJ, Harries KA (2015) On inherent bending in tension tests of bamboo. Wood Sci Technol 49(1):99–119CrossRef

Santos CL, De Jesus AMP, Morais JJL, Lousada JLPC (2010) A comparison between the EN 383 and ASTM D5764 test methods for dowel-bearing strength assessment of wood: experimental and numerical investigations. Strain 46(2):159–174CrossRef

Sassu M, De Falco A, Giresini L, Puppio ML (2016) Structural solutions for low-cost bamboo frames: experimental tests and constructive assessments. Materials 9(5):346. https://doi.org/10.3390/ma9050346CrossRef

Sharma B, Gatóo A, Bock M, Ramage M (2015) Engineered bamboo for structural applications. Constr Build Mater 81:66–73. https://doi.org/10.1016/j.conbuildmat.2015.01.077CrossRef

Su J, Li H, Xiong Z, Lorenzo R (2021) Structural design and construction of an office building with laminated bamboo lumber. Sustain Struct 1(2):000010. https://doi.org/10.54113/j.sust.2021.000010CrossRef

Sun X, He M, Li Z (2020) Novel engineered wood and laminated bamboo lumbers for structural applications: State-of-art of manufacturing technology and mechanical performance evaluation. Constr Build Mater 249:118751. https://doi.org/10.1016/j.conbuildmat.2020.118751CrossRef

Sun H, Li X, Li H, Hui D, Gaff M, Lorenzo R (2022) Nanotechnology application on bamboo material: a review. Nanotechnol Rev 11:1670–1698. https://doi.org/10.1515/ntrev-2022-0101CrossRef

Tian L, Kou Y, Hao J (2019) Axial compressive behaviour of sprayed composite mortar–original laminated bamboo lumber columns. Constr Build Mater 215:726–736. https://doi.org/10.1016/j.conbuildmat.2019.04.234CrossRef

Verma CS, Chariar VM (2013) Stiffness and strength analysis of four layered laminate laminated bamboo lumber at macroscopic scale. Compos B 45(1):369–376. https://doi.org/10.1016/j.compositesb.2012.07.048CrossRef

Wang F, Shao Z (2020) Study on the variation law of bamboo fibers’ tensile properties and the organization structure on the radial direction of bamboo stem. Ind Crops Prod 152:112521. https://doi.org/10.1016/j.indcrop.2020.112521CrossRef

Wang X, Zhou A, Zhao L, Chui YH (2019) Mechanical properties of wood columns with rectangular hollow cross section. Constr Build Mater 214:133–142. https://doi.org/10.1016/j.conbuildmat.2019.04.119CrossRef

Wei X, Chen FM, Wang G (2020) (2020) Flexibility characterization of bamboo slivers through winding-based bending stiffness method. J for Eng 5(2):48–53

Xiao Y, Yang RZ, Shan B (2013) Production, environmental impact and mechanical properties of glulam. Constr Build Mater 44:765–773. https://doi.org/10.1016/j.conbuildmat.2013.03.087CrossRef

Xiao Y, Shan B, Yang RZ, Li Z, Chen J (2014) Glue laminated bamboo (Glulam) for structural applications Materials and Joints in timber structures. Springer, Dordrecht, pp 589–601CrossRef

Xiao F, Wu Y, Zuo Y, Peng L, Li W, Sun X (2021) Preparation and bonding performance evaluation of bamboo veneer/foam aluminum composites. J for Eng 6(3):35–40. https://doi.org/10.13360/j.issn.2096-1359.202009024CrossRef

Xu X, Teng Q, Que Z, Zhang L (2019) Influence of different load directions on bearing strength of spruce glulam pin groove. Build Technol 50(04):419–422

Yang D, Li H, Xiong Z, Mimendi L, Lorenzo R, Corbi I, Hong C (2020) Mechanical properties of laminated bamboo under off-axis compression. Compos A 138:106042. https://doi.org/10.1016/j.compositesa.2020.106042CrossRef

Yu W, Yu Y, Zhou Y, Ren DH (2006) Studies on factors influencing properties of reconstituted engineering timber made from small-sized bamboo. China for Prod Ind 33(6):24–28

Zhang T, Wang A, Wang Q, Guan F (2019) Bending characteristics analysis and lightweight design of a bionic beam inspired by bamboo structures. Thin-Walled Struct 142:476–498. https://doi.org/10.1016/j.tws.2019.04.043CrossRef

Zhou A, Huang D, Li H, Su Y (2012) Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo. Constr Build Mater 35:191–196. https://doi.org/10.1016/j.conbuildmat.2012.03.011CrossRef

Zhou H, Wang G, Chen L, Yu Z, Smith LM, Chen F (2019) Hydrothermal aging properties of three typical bamboo engineering composites. Materials 12(9):1450. https://doi.org/10.3390/ma12091450CrossRef

Zhou K, Li H, Dauletbek A, Yang D, Xiong Z, Lorenzo R, Corbi O (2022) Slenderness ratio effect on the eccentric compression performance of chamfered laminated bamboo lumber columns. J Renewable Mater 10(1):165–182. https://doi.org/10.32604/jrm.2021.017223CrossRef

Titel: Pin groove compressive performance of laminated bamboo lumber at different angles
verfasst von: Haitao Li
Tianyu Gao
Gensheng Cheng
Rodolfo Lorenzo
Publikationsdatum: 08.11.2022
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 1/2023
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-022-04920-z

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 1/2023

Composite membranes of cellulose–mesoporous silica: optimization of membrane fabrication and adsorption capacity

Sodium alginate coupled with organosilane quaternary ammonium salt for the antibacterial application

Aqueous foam forming of quartz paper

Salt-free reactive dyeing of cotton fibers in a ternary solvent system with different reactive dye chemistries

Adhesive, sustained-release, antibacterial, cytocompatible hydrogel-based nanofiber membrane assembled from polysaccharide hydrogels and functionalized nanofibers

Synthesis by carbonate aminolysis and chiral recognition ability of cellulose 2,3-bis(3,5-dimethylphenyl carbamate)-6-(α-phenylethyl carbamate) selectors