nach oben

Erschienen in:

24.05.2021 | Materials for life sciences

Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior

verfasst von: A. Bužarovska, J. Blazevska-Gilev, B. T. Pérez-Martnez, L. R. Balahura, G. Gradisteanu Pircalabioru, S. Dinescu, M. Costache

Erschienen in: Journal of Materials Science | Ausgabe 24/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this study, poly(L-lactic acid) (PLA)/low molar mass alkali lignin (aL) (1%, 5% and 10% w/w) composites were prepared primarily for a comprehensive understanding of the effect of aL on their antimicrobial properties, biocompatibility and cytotoxic behavior. The properties were evaluated by Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, thermogravimetry and X-ray diffraction. The mechanical, water vapor barrier properties and photodegradability were analyzed as well. The results showed a significant inhibiting effect of aL on the crystallization behavior of PLA, increased water barrier properties (up to 73%) and photodegradability. PLA/aL composites showed a tenfold reduction in Gram-positive bacteria viability, very good cellular response and very low cytotoxicity levels, thus validating these materials as non-cytotoxic and with high potential to be used as food packaging.

Graphical abstract

Vorheriger Artikel Laser-modified Fe–30Mn surfaces with promoted biodegradability and biocompatibility toward biological applications

Nächster Artikel New observations of the twinning effect and austenite stability in intercritical quenched and tempered steel with high strength

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Beisl S, Friedl A, Miltner A (2017) Lignin from micro- to nanosize: applications. Int J Mol Sci 18:2367. https://doi.org/10.3390/ijms18112367CrossRef

Wang YY, Meng X, Pu Y, Ragauskas AJ (2020) Recent advances in the application of functionalized lignin in value-added polymeric materials. Polymers 12:2277. https://doi.org/10.3390/polym12102277CrossRef

Bertella S, Luterbacher JS (2020) Lignin functionalization for the production of novel materials. Trends Chem 2:440–452. https://doi.org/10.1016/j.trechm.2020.03.001CrossRef

Kun D, Pukánszky B (2017) Polymer/lignin blends: interactions, properties, applications. Eur Polym J 93:618–641. https://doi.org/10.1016/j.eurpolymj.2017.04.035CrossRef

Domenek D, Louaifi A, Guinault A, Baumberger S (2013) Potential of lignins as antioxidant additive in active biodegradable packaging materials. J Polym Environ 21:692–701. https://doi.org/10.1007/s10924-013-0570-6CrossRef

Witzler M, Alzagameem A, Bergs M, El Khaldi-Hansen B, Klein SE, Hielscher D, Kamm B, Kreyenschmidt J, Tobiasch E, Schulze M (2018) Lignin-derived biomaterials for drug release and tissue engineering. Molecules 23:1885. https://doi.org/10.3390/molecules23081885CrossRef

Figueiredo P, Lintinen K, Hirvonen JT, Kostiainen MA, Santos HA (2018) Properties and chemical modifications of lignin: towards lignin-based nanomaterials for biomedical applications. Prog Mater Sci 93:233–269. https://doi.org/10.1016/j.pmatsci.2017.12.001CrossRef

Abejón R, IPérez-Acebo H, Clavijo L (2018) Alternatives for chemical and biochemical lignin valorization: hot topics from a bibliometric analysis of the research published during the 2000–2016 period. Processes 6:98. https://doi.org/10.3390/pr6080098CrossRef

Saini P, Arora M, Ravi Kumar MNV (2016) Poly(lactic acid) blends in biomedical applications. Adv Drug Deliv Rev 107:47–59. https://doi.org/10.1016/j.addr.2016.06.014CrossRef

10.

Armentano I, Bitinis N, Fortunati E, Mattioli S, Rescignano N, Verdejo R, Lopez-Manchado MA, Kenny JM (2013) Multifunctional nanostructured PLA materials for packaging and tissue engineering. Prog Polym Sci 38:1720–1747. https://doi.org/10.1016/j.progpolymsci.2013.05.010CrossRef

11.

Corobea M, Vuluga Z, Florea D, Miculescu F, Voicu Ş (2017) Composites and nanocomposites based on polylactic acid. In: Handbook of composites from renewable materials. pp 327–360. https://doi.org/10.1002/9781119441632.ch160

12.

Rahman MA, De Santis D, Spagnoli G, Ramorino G, Penco M, Phuong VT, Lazzeri A (2013) Biocomposites based on lignin and plasticized poly(L-lactic acid). J Appl Polym Sci 129:202–214. https://doi.org/10.1002/app.38705CrossRef

13.

Gordobil O, Egüéz I, Liano-Ponte R, Labidi J (2014) Physicochemical properties of PLA lignin blends. Polym Degrad Stab 108:330–338. https://doi.org/10.1016/j.polymdegradstab.2014.01.002CrossRef

14.

Thunga M, Chen K, Grewell D, Kessler M (2014) Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers. Carbon 68:159–166. https://doi.org/10.1016/j.carbon.2013.10.075CrossRef

15.

Vila C, Santos V, Saake B, Parajó JC (2016) Manufacture, characterization, and properties of poly-(lactic acid) and its blends with esterified pine lignin. BioRes 11:5322–5332. https://doi.org/10.15376/biores.11.2.5322-5332CrossRef

16.

Ye H, Zhang Y, Yu Z (2017) Effect of desulfonation of lignosulfonate on the properties of poly(lactic acid)/lignin composites. BioRes 12:4810–4829. https://doi.org/10.15376/biores.12.3.4810-4829CrossRef

17.

Gkartzou E, Koumoulos EP, Charitidis CA (2017) Production and 3D printing processing of bio-based thermoplastic filament. Manuf Rev 4:1. https://doi.org/10.1051/mfreview/2016020CrossRef

18.

Musilova L, Mracek A, Kovalcik A, Smolka P, Minarik A, Humpolícek P, Vicha R, Ponizil P (2018) Hyaluronan hydrogels modified by glycinated Kraft lignin: morphology, swelling, viscoelastic properties and biocompatibility. Carbohydr Polym 181:394–403. https://doi.org/10.1016/j.carbpol.2017.10.048CrossRef

19.

Aadil KR, Barapatre A, Jha H (2016) Synthesis and characterization of Acacia lignin-gelatin film for its possible application in food packaging. Bioresour Bioprocess 3:27. https://doi.org/10.1186/s40643-016-0103-yCrossRef

20.

Spiridon I, Tanase CE (2018) Design, characterization and preliminary biological evaluation of new lignin-PLA biocomposites. Int J Biol Macromol 114:855–863. https://doi.org/10.1016/j.ijbiomac.2018.03.140CrossRef

21.

Zhang Y, Jiang M, Zhang Y, Cao Q, Wang X, Han Y, Sun G, Li Y, Zhou J (2019) Novel lignin–chitosan–PVA composite hydrogel for wound dressing. Mater Sci Eng C 104:110002. https://doi.org/10.1016/j.msec.2019.110002CrossRef

22.

Fisher EW, Sterzel HJ, Wegner G (1973) Investigation of the structure of solution grown crystals of lactide copolymers by means of chemical reactions. Coll Polym Sci 251:980–990. https://doi.org/10.1007/BF01498927CrossRef

23.

ASTM E96/E93-12. Standard test methods for water vapor transmission of materials. Annual book of standards, Vol 04.06.1993

24.

Park C-W, Youe W-J, Kim S-J, Han S-Y, Park J-S, Lee E-A, Kwon G-J, Kim Y-S, Kim N-H, Lee S-H (2019) Effect of lignin plasticization on physico-mechanical properties of lignin/poly(lactic acid) composites. Polymers 11:2089. https://doi.org/10.3390/polym11122089CrossRef

25.

Li J, He Y, Inoue Y (2003) Thermal and mechanical properties of biodegradable blends of poly(L-lactic acid) and lignin. Polym Int 52:949–955. https://doi.org/10.1002/pi.1137CrossRef

26.

Auras R, Lim LT, Susan E, Selke M, Tsuji H (2010) Poly(lactic acid): synthesis, structures, properties, processing, and application. Wiley, New JerseyCrossRef

27.

Furukawa T, Sato H, Murakami R, Zhang J, Noda I et al (2007) Comparison of miscibility and structure of poly (3-hydroxybutyrate-co-3- hydroxyhexanoate)/poly (l-lactic acid) blends with those of poly (3-hydroxybutyrate)/poly (l-lactic acid) blends studied by wide angle X-ray diffraction, differential scanning calorimetry, and FTIR microspectroscopy. Polymer 48:749–1755. https://doi.org/10.1016/j.polymer.2007.01.020CrossRef

28.

Abdelaziz OY, Hulteberg CP (2017) Physicochemical characterisation of technical lignins for their potential valorisation. Waste Biomass Valor 8:859–869. https://doi.org/10.1007/s12649-016-9643-9CrossRef

29.

Agarwal UP, Atalla RH (2010) spectroscopy. In: Heitner C, Dimmel DR, Schmidt JA (eds) Lignin and lignins, advances in chemistry. CRC Press, Boca Raton, pp 103–136CrossRef

30.

Mukherjee T, Tobin MJ, Lj P, Sani MA, Kao N, Gupta RK, Pannirselvam M, Bhattacharya QN, S, (2017) Chemically imaging the interaction of acetylated nanocrystalline cellulose (NCC) with a polylactic acid (PLA) polymer matrix. Cellulose 24:1717–1729. https://doi.org/10.1007/s10570-017-1217-xCrossRef

31.

Blomergen S, Holden D, Hamer G, Bluhm T, Marchessault R (1986) Studies of Composition and crystallinity of bacterial poly(β-hydroxybutyrate-co-β-hydroxyvalerate). Macromolecules 19:2865–2871. https://doi.org/10.1021/ma00165a034CrossRef

32.

Monticelli O, Bocchini S, Gardella L, Cavallo D, Cebe P, Germelli G (2013) Impact of synthetic talc on PLLA electrospun fibers. Europ Polym J 49:2572–2583. https://doi.org/10.1016/j.eurpolymj.2013.05.017CrossRef

33.

Bitinis N, Fortunati E, Verdejo R, Armentano I, Torre L, Kenny JM, Lopez-Manchado MA (2014) Thermal and bio-disintegration properties of poly(lactic acid)/natural rubber/organoclay nanocomposites. Appl Clay Sci 93–94:78–84. https://doi.org/10.1016/j.clay.2014.02.024CrossRef

34.

Chen X, Kalish J, Hsu S (2011) Structure evolution of α′-phase poly(lactic acid). J Polym Sci B-Polym Phys 49:1446–1454. https://doi.org/10.1002/polb.22327CrossRef

35.

Singla RK, Maiti SN, Ghosh AK (2016) Crystallization, morphological, and mechanical response of poly(lactic acid)/lignin-based biodegradable composites. Polym Plast Technol Eng 55:475–485. https://doi.org/10.1080/03602559.2015.1098688CrossRef

36.

Pan P, Zhu B, Kai W, Dong T, Inoue Y (2008) Polymorphic transition in disordered poly (L-lactide) crystals induced by annealing at elevated temperatures. Macromolecules 41:4296–4304. https://doi.org/10.1021/ma800343gCrossRef

37.

Ouyang W, Huang Y, Luo H, Wang D (2012) Poly (lactic acid) blended with cellulolytic enzyme lignin: mechanical and thermal properties and morphology evaluation. J Polym Environ 20:1–9. https://doi.org/10.1007/s10924-011-0359-4CrossRef

38.

Spiridon I, Leluk K, Resmerita AM, Darie RN (2015) Evaluation of PLA-lignin bioplastics properties before and after accelerated weathering. Compos Part B Eng 69:342–349. https://doi.org/10.1016/j.compositesb.2014.10.006CrossRef

39.

Park CW, Youe WJ, Namgung HW, Han SY, Seo PN, Chae HM, Lee SH (2018) Effect of lignocellulose nanofibril and polymeric methylene diphenyl diisocyanate addition on plasticized lignin/polycaprolactone composites. BioRes 13:6802–6817. https://doi.org/10.15376/biores.13.3.6802-6817CrossRef

40.

Kim Y, Suhr J, Seo H-W, Sun H, Kim S, Park IK, Kim S-H, Lee Y, Kim K-J, Nam J-D (2017) All Biomass and UV protective composites composed of compatibilized lignin and Poly(Lactic acid). Sci Rep 7:43596. https://doi.org/10.1038/srep43596CrossRef

41.

Gilormini P, Verdu J (2018) On the role of hydrogen bonding on water absorption polymers. Polymer 142:164–169. https://doi.org/10.1016/j.polymer.2018.03.033CrossRef

42.

Chaochanchaikul K, Jayaraman K, Rosarpitak V, Sombatsompop N (2012) Influence of lignin content on photodegradation in wood/HDPE composites under UV weathering. BioRes 7:38–55

43.

Lekelefac CA, Busse N, Herrenbauer M, Czermak P (2015) Photocatalytic based degradation processes of lignin derivatives. Int J Photoenergy 2015:137634. https://doi.org/10.1155/2015/137634CrossRef

44.

Buzarovska A (2013) PLA nano composites with functionalized TiO₂ nanoparticles. Polym Plast Technol Eng 52:280–286. https://doi.org/10.1080/03602559.2012.751411CrossRef

45.

Dong X, Dong M, Lu Y, Turley A, Jin T, Wu C (2011) Antimicrobial and antioxidant activities of lignin from residue of corn stover to ethanol production. Ind Crops Prod 34:1629–1634. https://doi.org/10.1016/j.indcrop.2011.06.002CrossRef

46.

Kai D, Ren W, Tian L, Chee PL, Liu Y, Ramakrishna S, Loh XJ (2016) Engineering poly(lactide)–lignin nanofibers with antioxidant activity for biomedical application. ACS Sustain Chem Eng 4:5268–5276. https://doi.org/10.1021/acssuschemeng.6b00478CrossRef

47.

Rocca DM, Vanegas JP, Fournier K, Becerra MC, Scaiano JC, Lanterna AE (2018) Biocompatibility and photo-induced antibacterial activity of lignin-stabilized noble metal nanoparticles. RSC Adv 8:40454–40463. https://doi.org/10.1039/c8ra08169gCrossRef

Titel: Poly(l-lactic acid)/alkali lignin composites: properties, biocompatibility, cytotoxicity and antimicrobial behavior
verfasst von: A. Bužarovska
J. Blazevska-Gilev
B. T. Pérez-Martnez
L. R. Balahura
G. Gradisteanu Pircalabioru
S. Dinescu
M. Costache
Publikationsdatum: 24.05.2021
Verlag: Springer US
Erschienen in: Journal of Materials Science / Ausgabe 24/2021
Print ISSN: 0022-2461
Elektronische ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-021-06185-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Graphical abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 24/2021

Modeling the solar absorption performance of Copper@Carbon core–shell nanoparticles

Melamine-assisted synthesis of cobalt–nickel coordination polymers as electrode materials for supercapacitors

Covalent surface functionalization of carbon nanostructures via [2 + 1] cycloaddition microwave-assisted reactions

Microstructure evolution and mechanical responses of Al–Zn–Mg–Cu alloys during hot deformation process

New observations of the twinning effect and austenite stability in intercritical quenched and tempered steel with high strength

Silica-based aerogel composites reinforced with different aramid fibres for thermal insulation in Space environments

Premium Partner

Marktübersichten