nach oben

Journal of Materials Engineering and Performance

Erschienen in:

16.08.2021

Postprocessing of Additively Manufactured Metal Parts

verfasst von: Wayne Hung

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 9/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

This article describes postprocessing techniques for machining, finishing, heat treating, and deburring used to remove additive manufacturing (AM) metallic workpieces from a base plate and subsequent techniques to enhance printed workpieces. The AM processes include powder bed fusion, binder jetting, and direct energy deposition. The discussion provides information on powder removal, powder recycling and conditioning, part removal, and part enhancement. The mechanism, applications, advantages, and limitations of mechanical, radiation, and chemical finishing processes as well as the properties of the resulting material are also covered.

Vorheriger Artikel Design and Manufacturing Implications of Additive Manufacturing

Nächster Artikel Studies on Hybrid Bio-Nanocomposites for Structural Applications

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

L.C. Ardila, F. Garciandia, J.B. González-Díaz, P. Álvarez, A. Echeverria, M.M. Petite, R. Deffley and J. Ochoa, Effect of IN718 Recycled Powder Reuse on Properties of Parts Manufactured by Means of Selective Laser Melting, Phys. Procedia, 2014, 56, p 99–107. https://doi.org/10.1016/j.phpro.2014.08.152CrossRef

H. Asgari, C. Baxter, K. Hosseinkhani and M. Mohammadi, On Microstructure and Mechanical Properties of Additively Manufactured AlSi10Mg 200C using Recycled Powder, Mater. Sci. Eng. A, 2017, 707, p 148–158. https://doi.org/10.1016/j.msea.2017.09.041CrossRef

A. Hadadzadeh, C. Baxter, B.A. Shalchi and M. Mohammadi, Strengthening Mechanisms in Direct Metal Laser Sintered AlSi10Mg: Comparison Between Virgin and Recycled Powders, Addit. Manuf., 2018, 23, p 108–120. https://doi.org/10.1016/j.addma.2018.07.014CrossRef

H.A. Maamoun, M. Elbestawi, G.K. Dosbaeva and S.C. Veldhuis, Thermal Post-Processing of AlSi10Mg Parts Produced by Selective Laser Melting using Recycled Powder, Addit. Manuf., 2018, 21, p 234–247. https://doi.org/10.1016/j.addma.2018.03.014CrossRef

J.A. Slotwinski, E.J. Garboczi, P.E. Stutzman, C.F. Ferraris, S.S. Watson and M.A. Peltz, Characterization of Metal Powders Used for Additive Manufacturing, J. Res. Nat. Inst. Stand. Technol., 2014, 119, p 460–493. https://doi.org/10.6028/jres.119.018CrossRef

M.X. Gan and C.H. Wong, Practical Support Structures for Selective Laser Melting, J. Mater. Process. Technol., 2016, 238, p 474–484. https://doi.org/10.1016/j.jmatprotec.2016.08.006CrossRef

https://grabcad.com/library/math-visualization-gyroid-1. Accessed 19 Jun 2019

N.N. Kumbhar and A.V. Mulay, Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review, J. Inst. Eng. India Ser. C, 2018, 99(4), p 481–487. https://doi.org/10.1007/s40032-016-0340-zCrossRef

R.K. Ananda-Kumara, W. Moscoso-Kingsley, G. Jacob, A. Donmez and V. Madhavan, Machining Behavior of Additively Manufactured and Cast-Wrought Nickel-Based Superalloy (IN 625), Procedia Manuf., 2018, 26, p 595–606. https://doi.org/10.1016/j.promfg.2018.07.070CrossRef

10.

G. Bonaiti, P. Parenti, M. Annoni and S. Kapoor, Micro-Milling Machinability of DED Additive Titanium Ti-6Al-4V, Procedia Manuf., 2017, 10, p 497–509. https://doi.org/10.1016/j.promfg.2017.07.104CrossRef

11.

M. Sadiq, M.N. Hoang, N. Valencia, S. Obeidat and N.P. Hung, Experimental Study of Micromilling Selective Laser Melted Inconel 718 Superalloy, Procedia Manuf., 2018, 26, p 983–992. https://doi.org/10.1016/j.promfg.2018.07.129CrossRef

12.

J. Mazumder, J. Nui, and A. Shih, High-Speed, Ultra Precision Manufacturing Station That Combines Direct Metal Deposition and EDM, U.S. Patent 2007/0205184 A1, 6 Sept 2007

13.

E. Atzenia, M. Barlettab, F. Calignanoc, L. Iulianoa, G. Rubinod and V. Tagliaferri, Abrasive Fluidized Bed (AFB) Finishing of AlSi10Mg Substrates Manufactured by Direct Metal Laser Sintering (DMLS), Addit. Manuf., 2016, 10, p 15–23. https://doi.org/10.1016/j.addma.2016.01.005CrossRef

14.

Abrasive Flow Machining (AFM) Guidelines, 2016, Extrude Hone

15.

M.S. Duval-Chaneac, S. Hana, C. Claudin, F. Salvatore, J. Bajolet and J. Rech, Experimental Study on Finishing of Internal Laser Melting (SLM) Surface with Abrasive Flow Machining (AFM), Precis. Eng., 2018, 54, p 1–6. https://doi.org/10.1016/j.precisioneng.2018.03.006CrossRef

16.

Extrude Hone for Additive Manufacturing—Advanced Finishing Technology, 2018, Extrude Hone

17.

M. Jamal and M.N. Morgan, Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry, J. MDPI Invent., 2017 https://doi.org/10.3390/inventions2040036CrossRef

18.

D. Fletcher and F. Cooper, The precious project: Polishing and finishing of additive manufacturing (AM) industry, https://www.academia.edu May 2018, p 211–234

19.

F. Calignano, D. Manfredi, E.P. Ambrosio, L. Iuliano and P. Fino, Influence of Process Parameters on Surface Roughness of Aluminum Parts Produced by DMLS, J. Adv. Manuf. Technol., 2013, 67, p 2743–2751. https://doi.org/10.1007/s00170-012-4688-9CrossRef

20.

K.L. Tan and S.H. Yeo, Surface Modification of Additive Manufactured Components by Ultrasonic Cavitation Abrasive Finishing, Wear, 2017, 378–379, p 90–95. https://doi.org/10.1016/j.wear.2017.02.030CrossRef

21.

A. Lamikiz, J.A. Sanchez, L.N. Lopez de Lacalle and J.L. Arana, Laser polishing of Parts Built Up by Selective Laser Sintering, J. Mach. Tools Manuf., 2007, 47, p 2040–2050. https://doi.org/10.1016/j.ijmachtools.2007.01.013CrossRef

22.

Z. Fang, L. Lu, L. Chen and Y. Guan, Laser Polishing of Additive Manufactured Superalloy, Procedia CIRP, 2018, 71, p 150–154. https://doi.org/10.1016/j.procir.2018.05.088CrossRef

23.

C.P. Ma, Y.C. Guan and W. Zhou, Laser Polishing of Additive Manufactured Ti Alloys, J. Opt. Lasers Eng., 2017, 93, p 171–177. https://doi.org/10.1016/j.optlaseng.2017.02.005CrossRef

24.

S. Marimuthu, A. Triantaphyllou, M. Antar, D. Wimpenny, H. Morton and M. Beard, Laser Polishing of Selective Laser Melted Components, J. Mach. Tools Manuf., 2015, 95, p 97–104. https://doi.org/10.1016/j.ijmachtools.2015.05.002CrossRef

25.

K.C. Yung, T.Y. Xiao, H.S. Choy, W.J. Wang and Z.X. Cai, Laser Polishing of Additive Manufactured CoCr Alloy Components with Complex Surface Geometry, J. Mater. Process. Technol., 2018, 262, p 53–64. https://doi.org/10.1016/j.jmatprotec.2018.06.019CrossRef

26.

S. Hallmanna, T. Wolny and C. Emmelmann, Post-Processing of Additively Manufactured Cutting Edges by Laser Ablation, Procedia CIRP, 2018, 74, p 276–279. https://doi.org/10.1016/j.procir.2018.08.110CrossRef

27.

N. Worts, J. Jones and J. Squier, Surface Structure modification of Additively Manufactured Titanium Components via Femtosecond Laser Micromachining, J. Opt Commun., 2019, 430, p 352–357. https://doi.org/10.1016/j.optcom.2018.08.055CrossRef

28.

E. Łyczkowska, P. Szymczyk, B. Dybała and E. Chlebus, Chemical Polishing of Scaffolds made of Ti–6Al–7Nb Alloy by Additive Manufacturing, Arch. Civ. Mech. Eng., 2014, 14, p 586–594. https://doi.org/10.1016/j.acme.2014.03.001CrossRef

29.

Z. Baicheng, L. Xiaohua, B. Jiaming, G. Junfeng, W. Pan, S. Chen-nan, N. Muiling, Q. Guojun and W. Jun, Study of Selective Laser Melting (SLM) Inconel 718 Part Surface Improvement by Electrochemical Polishing, Mater. Des., 2017, 116, p 531–537. https://doi.org/10.1016/j.matdes.2016.11.103CrossRef

30.

AFM Technology Handbook, 2018, Extrude Hone

31.

S. Jain, J. Hyder, M. Corliss, B.L. Tai, and W.N.P. Hung, “Electrochemical polishing of selective laser melted Inconel 718. In: Proc. 47th SME NA Manuf. Res. Conf. (NAMRC 47), 201910.1016/j.promfg.2019.06.145

32.

C. Rotty, M.-L. Doche, A. Mandroyan and J.-Y. Hihn, Electropolishing Behavior of Additive Layer Manufacturing 316l Stainless Steel in Deep Eutectic Solvents, Electrochem. Soc. ECS Trans., 2017, 77(11), p 1199–1207. https://doi.org/10.1149/07711.1199ecstCrossRef

33.

H. Zeidler, F. Boettger-Hiller, J. Edelmann and A. Schubert, Surface Finish Machining of Medical Parts using Plasma Electrolytic Polishing, Procedia CIRP, 2016, 49, p 83–87. https://doi.org/10.1016/j.procir.2015.07.038CrossRef

34.

J. Kim and H.W. Park, Hybrid Deburring Process Assisted by a Large Pulsed Electron Beam (LPEB) for Laser-Fabricated Patterned Metal masks, Appl. Surf. Sci., 2015, 357, p 1676–1683. https://doi.org/10.1016/j.apsusc.2015.10.047CrossRef

• A. Lalehpour, “Modelling, Inspection, and Post-Processing of Layer-Based Additive Manufacturing surfaces to Maintain Product Quality,” Thesis, University of Ontario Institute of Technology, 2017

• A. Triantaphyllou, C.L. Giusca, G.D. Macaulay, F. Roerig, M. Hoebel, R.K. Leach, B. Tomita and K.A. Milne, Surface Texture Measurement for Additive Manufacturing, J. Surf. Topogr. Metrol. Prop., 2015, 3, p 1–8. https://doi.org/10.1088/2051-672X/3/2/024002

• E. Atzeni and A. Salmi, Economics of Additive Manufacturing for End- Usable Metal Parts, J. Adv. Manuf. Technol., 2012, 62, p 1147–1155. https://doi.org/10.1007/s00170-011-3878-1

• M. Benedettia, E. Torresani, M. Leoni, V. Fontanari, M. Bandini, C. Pederzolli and C. Potrich, The Effect of Post-Sintering Treatments on the Fatigue and Biological Behavior of Ti-6Al-4V ELI Parts Made by Selective Laser Melting, J. Mech. Behav. Biomed. Mater., 2017, 71, p 295–306. https://doi.org/10.1016/j.jmbbm.2017.03.024CrossRef

• A. Boschetto and L. Bottini, Surface Improvement of Fused Deposition Modeling Parts by Barrel Finishing, J. Rapid Prototyp., 2015, 21(6), p 686–696. https://doi.org/10.1108/RPJ-10-2013-0105CrossRef

• C.S. Scott, J.W. Comb, W.R. Priedeman Jr., and R.L. Zinniel, Process of support removal for fused deposition modeling, U.S. Patent 5,503,785, 1996

• J. Dawes, R. Bowerman and R. Trepleton, Exploring the Production and Supply of Metal Powders for AM Processes, Johns Matthey Technol. Rev., 2015, 59(3), p 243–256. https://doi.org/10.1595/205651315X688686CrossRef

• B. Duleba, F. Greškovič and J.W. Sikora, Materials & Finishing Methods of DMLS Manufactured Parts, Trans. Inovácií, 2011, 21, p 143–148.

• E. Uhlmann and S. Roßkamp, Surface Integrity and Chip Formation in Abrasive Flow Machining, Procedia CIRP, 2018, 71, p 446–452. https://doi.org/10.1016/j.procir.2018.05.048CrossRef

• B. Ezair, F. Massarwi and G. Elber, Orientation Analysis of 3D Objects Toward Minimal Support Volume in 3D-Printing, J. Comput. Graph., 2015, 51, p 117–124. https://doi.org/10.1016/j.cag.2015.05.009CrossRef

• Z. Feng, E. Granda and N.P. Hung, Experimental Investigation of Vibration-Assisted Pulsed Electrochemical Machining, Procedia Manuf., 2016, 5, p 798–814. https://doi.org/10.1016/j.promfg.2016.08.065CrossRef

• J.M. Flynn, A. Shokrani, S.T. Newman and V. Dhokian, Hybrid Additive and Subtractive Machine Tools – Research and Industrial Developments, J. Mach. Tools Manuf., 2016, 101, p 79–101. https://doi.org/10.1016/j.ijmachtools.2015.11.007CrossRef

• W.E. Frazier, Metal Additive Manufacturing: A Review, J. Mater. Eng. Perform., 2014, 23, p 1917–1928. https://doi.org/10.1007/s11665-014-0958-zCrossRef

• G. Strano, L. Hao, R.M. Everson and K.E. Evans, Surface Roughness Analysis, Modelling and Prediction in Selective Laser melting, J. Mater. Process. Technol., 2013, 213, p 589–597. https://doi.org/10.1016/j.jmatprotec.2012.11.011CrossRef

• W.S. Gora, Y. Tian, A.P. Cabo, M. Ardron, R.R.J. Maier, P. Prangnell, N.J. Weston and D.P. Hand, Enhancing Surface Finish of Additively Manufactured Titanium and Cobalt Chrome Elements using Laser Based Finishing, Phys. Procedia, 2016, 83, p 258–263. https://doi.org/10.1016/j.phpro.2016.08.021CrossRef

• E. Gordon and V. Dhokia, “Experimental Framework for Testing the Finishing of Additive Parts. In: Proc. ICMR2015, 13th Int. Conf. Manuf. Res., UK, 2015, p 57–62

• W. Grzesik, Hybrid Additive and Subtractive Manufacturing Processes and Systems: A Review, J. Mach. Eng., 2018, 18(4), p 5–24. https://doi.org/10.5604/01.3001.0012.7629CrossRef

• H. Sangil, S. Ferdinando and R. Joël, Residual Stress Profiles Induced by Abrasive Flow Machining (AFM) in 15–5PH Stainless Steel Internal Channel Surfaces, J. Mater. Process. Technol., 2019, 267, p 348–358. https://doi.org/10.1016/j.jmatprotec.2018.12.024CrossRef

• J.R. Hebert, Viewpoint: Metallurgical Aspects of Powder Bed Metal Additive Manufacturing, J. Mater. Sci., 2016, 51, p 1165–1175. https://doi.org/10.1007/s10853-015-9479-xCrossRef

• K. Hu, S. Jin and C.L. Wang, Support Slimming for Single Material Based Additive Manufacturing, J. Comput. Aided Des., 2015, 65, p 1–10. https://doi.org/10.1016/j.cad.2015.03.001CrossRef

• A. Hussein, L. Hao, C. Yan, R. Everson and P. Young, Advanced Lattice Support Structures for Metal Additive Manufacturing, J. Mater. Process. Technol., 2013, 213, p 1019–1026. https://doi.org/10.1016/j.jmatprotec.2013.01.020CrossRef

• T. Illston and Y.P. Vora, Additive Manufacturing, U.S. Patent 2017/0057014 A1, 2017

• A.S. Iquebal, S. Amri, S. Shrestha, Z. Wang, G.P. Manogharan and S. Bukkapatnam, Longitudinal Milling and Fine Abrasive Finishing Operations to Improve Surface Integrity of Metal AM components, Procedia Manuf., 2017, 10, p 990–996. https://doi.org/10.1016/j.promfg.2017.07.090CrossRef

• J. dos Santos Solheid, H.J. Seifert and W. Pfleging, Laser Surface Modification and Polishing of Additive Manufactured Metallic Parts, Procedia CIRP, 2018, 74, p 280–284. https://doi.org/10.1016/j.procir.2018.08.111CrossRef

• O. Kerbrat, P. Mognol and J.-Y. Hascoet, A New DFM Approach to Combine Machining and Additive Manufacturing, Comput. Ind., 2011, 62, p 684–692. https://doi.org/10.1016/j.compind.2011.04.003CrossRef

• W.A. Khan, M.N. Hoang, B. Tai and N.P. Hung, Through-Tool Minimum Quantity Lubrication and Effect on Machinability, J. Manuf. Process., 2018, 34, p 750–757. https://doi.org/10.1016/j.jmapro.2018.03.047CrossRef

• D. Kim, K. Son, D. Sung, Y. Kim and W. Chung, Effect of Added Ethanol in Ethylene Glycol-NaCl Electrolyte on Titanium Electropolishing, Corros. Sci., 2015, 98, p 494–499. https://doi.org/10.1016/j.corsci.2015.05.057CrossRef

• J.H. Lemelson, Method for finishing articles, U.S. Patent 3,851,426, 1974

• A.M. Mirzendehdel and K. Suresh, Support Structure Constrained Topology Optimization for Additive Manufacturing, Comput. Aided Des., 2016, 81, p 1–13. https://doi.org/10.1016/j.cad.2016.08.006CrossRef

• N. Mohammadian, S. Turenne and V. Brailovski, Surface Finish Control of Additively Manufactured Inconel 625 Components using Combined Chemical-Abrasive flow Polishing, J. Mater. Process. Technol., 2018, 252, p 728–738. https://doi.org/10.1016/j.jmatprotec.2017.10.020CrossRef

• A.P. Nagalingam and S.H. Yeo, “Controlled Hydrodynamic Cavitation erosion with Abrasive Particles for Internal Surface Modification of Additive Manufactured Components, Wear, 2018, 414–415, p 89–100. https://doi.org/10.1016/j.wear.2018.08.006CrossRef

• N.E. Uzana, S. Ramatib, R. Shnecka, N. Fragea and O. Yeheskela, On the Effect of Shot-Peening on Fatigue Resistance of AlSi10Mg Specimens Fabricated by Additive manufacturing using Selective Laser Melting (AMSLM), Addit. Manuf., 2018, 21, p 458–464. https://doi.org/10.1016/j.addma.2018.03.030CrossRef

• K. Nestler, F. Böttger-Hiller, W. Adamitzki, G. Glowa, H. Zeidler and A. Schubert, Plasma Electrolytic Polishing – an Overview of Applied Technologies and Current Challenges to Extend the Polishable Material Range, Procedia CIRP, 2016, 42, p 503–507. https://doi.org/10.1016/j.procir.2016.02.240CrossRef

• G. Nicoletto, S. Maisano, M. Antolotti and F. Dallaglio, Influence of Post Fabrication Heat Treatments on the Fatigue Behavior of Ti-6Al-4V produced by Selective Laser Melting, Procedia Struct. Integr., 2017, 7, p 133–140. https://doi.org/10.1016/j.prostr.2017.11.070CrossRef

• N. Sihag, P. Kala and P.M. Pandey, Analysis of Surface Finish Improvement during Ultrasonic Assisted Magnetic Abrasive Finishing on Chemically Treated Tungsten Substrate, Procedia Manuf., 2017, 10, p 136–146. https://doi.org/10.1016/j.promfg.2017.07.040CrossRef

• O. Oyelola, P. Crawforth, R. M’Saoubi and A.T. Clare, On the Machinability of Directed Energy Deposited Ti6Al4V, Addit. Manuf., 2018, 19, p 39–50. https://doi.org/10.1016/j.addma.2017.11.005CrossRef

• O. Oyelola, P. Crawforth, R. M’Saoubi and A.T. Clare, Machining of Additively Manufactured Parts: Implications for Surface Integrity, Procedia CIRP, 2016, 45, p 119–122. https://doi.org/10.1016/j.procir.2016.02.066CrossRef

• J. Patel, Z. Feng, P. Villanueva and W.N.P. Hung, Quality Enhancement with Ultrasonic Wave and Pulsed Current in Electrochemical Machining, Procedia Manuf., 2017, 10, p 662–673. https://doi.org/10.1016/j.promfg.2017.07.013CrossRef

• T.L. Perry, D. Werschmoeller, X. Li, F.E. Pfefferkorn and N.A. Duffie, Pulsed Laser Polishing of Micro-Milled Ti6Al4V Samples, J. Manuf. Process., 2009, 11, p 74–81. https://doi.org/10.1016/j.jmapro.2009.10.001CrossRef

• M. Qian, W. Xu, M. Brandt and H.P. Tang, Additive Manufacturing and Post Processing of Ti-6Al-4V for Superior Mechanical Properties, MRS Bull., 2016, 41, p 775–783. https://doi.org/10.1557/mrs.2016.215CrossRef

• R.E. Williams and V.L. Melton, Abrasive Flow Finishing of Stereolithography Prototypes, J. Rapid Prototyp., 1998, 4(2), p 56–67. https://doi.org/10.1108/13552549810207279CrossRef

• R. Vaidya and S. Anand, Optimum Support Structure Generation for Additive Manufacturing using Unit Cell Structures and Support Removal Constraint, Procedia Manuf., 2016, 5, p 1043–1059. https://doi.org/10.1016/j.promfg.2016.08.072CrossRef

• K. Salonitis, L. D’Alvise, B. Schoinochoritis and D. Chantzis, Additive Manufacturing and Postprocessing Simulation: Laser Cladding Followed by High Speed Machining, J. Adv. Manuf. Technol., 2016, 85, p 2401–2411. CrossRef

• “Heat resistant superalloys,” Application Guide, Sandvik Coromant https://www.sandvik.coromant.com/C-2920-034.pdf.

• J.A. Slotwinski and E.J. Garboczi, Metrology Needs for Metal Additive Manufacturing Powders, JOM, 2015, 67(3), p 538–543. https://doi.org/10.1007/s11837-014-1290-7CrossRef

• G. Strano, L. Hao, R.M. Everson and K.E. Evans, A New Approach to the Design and Optimisation of Support Structures in Additive Manufacturing, J. Adv. Manuf. Technol., 2013, 66, p 1247–1254. https://doi.org/10.1007/s00170-012-4403-xCrossRef

• A. Strondl, O. Lyckfeldt, H. Brodin and U. Ackelid, Characterization and Control of Powder Properties for Additive Manufacturing, JOM, 2015, 67(3), p 549–554. https://doi.org/10.1007/s11837-015-1304-0CrossRef

• W.J. Swanson, D.F. Mannella, and R.G. Schloesser “Support structure removal system,” U.S. Patent 8,459,280 B2, 201310.4155/ppa.13.34

• T. Yamazaki, Development of a Hybrid Multi-Tasking Machine Tool: Integration of Additive Manufacturing Technology with CNC Machining, Procedia CIRP, 2016, 42, p 81–86. https://doi.org/10.1016/j.procir.2016.02.193CrossRef

• H.P. Tang, M. Qian, N. Liu, X.Z. Zhang, G.Y. Yang and J. Wang, Effect of Powder Reuse Times on Additive Manufacturing of Ti-6Al-4V by Selective Electron Beam Melting, JOM, 2015, 67(3), p 555–563. https://doi.org/10.1007/s11837-015-1300-4CrossRef

• A. Townsend, N. Senin, L. Blunta, R.K. Leach and J.S. Taylor, Surface Texture Metrology for Metal Additive Manufacturing: A Review, Precis. Eng., 2016, 46, p 34–47. https://doi.org/10.1016/j.precisioneng.2016.06.001CrossRef

• V. Urlea and V. Brailovski, Electropolishing and Electropolishing-Related Allowances for Powder Bed Selectively Laser-Melted Ti-6Al-4V Alloy Components, J. Mater. Process. Technol., 2017, 242, p 1–11. https://doi.org/10.1016/j.jmatprotec.2016.11.014CrossRef

• B. Vayrea, F. Vignata and F. Villeneuvea, Designing for Additive Manufacturing, Procedia CIRP, 2012, 3, p 632–637. https://doi.org/10.1016/j.procir.2012.07.108CrossRef

• W.M. Tuchoa, P. Cuvillier, A. Sjolyst-Kverneland and V. Hansen, Microstructure and Hardness Studies of Inconel 718 Manufactured by Selective Laser Melting Before and After Solution Heat Treatment, Mater. Sci. Eng. A, 2017, 689, p 220–232. https://doi.org/10.1016/j.msea.2017.02.062CrossRef

• Z. Wang, V. Kovvuria, A. Araujo, M. Bacci, N.P. Hung and S.T.S. Bukkapatnam, Built-Up-Edge Effects on Surface Deterioration in Micromilling Processes, J. Manuf. Process., 2016, 24, p 321–327. https://doi.org/10.1016/j.jmapro.2016.03.016CrossRef

• X. Shui, K. Yamanaka, M. Mori, Y. Nagatad, K. Kurita and A. Chiba, Effects of Post-Processing on Cyclic Fatigue Response of a Titanium Alloy Additively Manufactured by Electron Beam Melting, Mater. Sci. Eng. A, 2017, 680, p 239–248. https://doi.org/10.1016/j.msea.2016.10.059CrossRef

• X. Wang, T. Keya and K. Chou, Build Height Effect on the Inconel 718 Parts Fabricated by Selective Laser Melting, Procedia Manuf., 2016, 5, p 1006–1017. https://doi.org/10.1016/j.promfg.2016.08.089CrossRef

• Y. Tian, D. Tomus, P. Rometsch and X. Wu, Influences of Processing Parameters on Surface Roughness of Hastelloy X Produced by Selective Laser Melting, Addit. Manuf., 2017, 13, p 103–112. https://doi.org/10.1016/j.addma.2016.10.010CrossRef

• Y. Xie and X. Chen, Support-Free Interior Carving for 3D Printing, J. Vis. Inform., 2017, 1, p 9–15. https://doi.org/10.1016/j.visinf.2017.01.002CrossRef

• Y. Zhai, H. Galarraga and D.A. Lados, Microstructure Evolution, Tensile Properties, and Fatigue Damage Mechanisms in Ti-6Al-4V Alloys Fabricated by Two Additive Manufacturing Techniques, Procedia Eng., 2015, 114, p 658–666. https://doi.org/10.1016/j.proeng.2015.08.007CrossRef

Titel: Postprocessing of Additively Manufactured Metal Parts
verfasst von: Wayne Hung
Publikationsdatum: 16.08.2021
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 9/2021
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-021-06037-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 9/2021

Mechanical Performance and Mesostructure Analysis of Proton-Irradiated Fused Filament Fabrication Acrylonitrile Butadiene Styrene Material

Effect of Rescanning Strategy on Residual Stress and Distortion of Two Alloys Manufactured by Selective Laser Melting

Influence of Microstructure and Defects on Mechanical Properties of AISI H13 Manufactured by Electron Beam Powder Bed Fusion

Effect of Laser Polishing Post-Processing Technique on the Roughness and Wear Resistance of Inconel 625 Deposited by Laser Cladding on AISI 304L Stainless Steel

Structural Investigation of Delicate-Geometry Fused Deposition Modeling Additive Manufacturing Scaffolds: Experiment and Analytics

Investigation of Spatters in Cold Metal Transfer + Pulse-Based Wire and Arc Additive Manufacturing of High Nitrogen Austenitic Stainless Steel

Premium Partner

Marktübersichten