nach oben

Journal of Material Cycles and Waste Management

Erschienen in:

29.02.2024 | ORIGINAL ARTICLE

Preparation of calcium sulfate from recycled red gypsum to neutralize acidic wastewater and application of high silica residue

verfasst von: Chulei Wang, Xiaoling Ma, Wanzhen Zhong, Hongbin Tan, Feihua Yang, Maksim Kamarou, Dmitry Moskovskikh, Valentin Ramanovski

Erschienen in: Journal of Material Cycles and Waste Management | Ausgabe 3/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Red gypsum (RG) is an industrial waste generated from the titanium dioxide process produced. For the low-cost and high-benefit utilization of RG, calcium sulfate (CaS) was prepared from recycled RG. Rod-like gypsum crystals with a rough surface, uniform size, 1 µm in diameter and 5 µm in length, were obtained, when the as-prepared CaS was divided into three equal portions and one portion was added at each interval of 2 h to neutralize the simulated acidic wastewater. CaS was prepared from RG to neutralize acidic wastewater to produce silicon-enriched RG for the next cycle. High silica residue (HSR) was obtained after 6 cycles. The effect of calcined temperature on the desulfurization of HSR was investigated. The sulfur content in the residue decreased by 97% after calcined at 1200 ℃ for 2 h. According to GB/T 12957-2005 “Industrial waste residue activity test method for cement admixture”, the activity index of desulfurized HSR was 90%, which it can be used as a cementing material.

Vorheriger Artikel Optimizing Indonesian municipal solid waste collection scenarios: integration of multi-objective search simulation and social cost–benefit analysis

Nächster Artikel Effect of cold plasma pretreatment on biodegradation of high-density polyethylene (HDPE) and polystyrene (PS)

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Rosli NA, Aziz HA, Selamat MR et al (2020) A mixture of sewage sludge and red gypsum as an alternative material for temporary landfill cover. J Environ Manag 263:110420. https://doi.org/10.1016/j.jenvman.2020.110420CrossRef

Wu H, Fen Y, Li H et al (2019) Red gypsum utilization and acidic wastewater treatment based on metal self-enrichment process. Sci Total Environ 691:9–15. https://doi.org/10.1016/j.scitotenv.2019.07.080CrossRef

Chen QJ, Ding WJ, Sun H et al (2020) Synthesis of anhydrite from red gypsum and acidic wastewater treatment. J Clean Prod 278:24026. https://doi.org/10.1016/j.jclepro.2020.124026CrossRef

Perez-Moreno SM, Gazquez MJ, Barneto AG et al (2013) Thermal characterization of new fre-insulating materials from industrial inorganic TiO₂ wastes. Thermochim Acta 552:114–122. https://doi.org/10.1016/j.tca.2012.10.021CrossRef

Gázquez MJ, Bolívar JP, García-Tenorio R et al (2009) Physicochemical characterization of raw materials and co-products from the titanium dioxide industry. J Hazard Mater 166:1429–1440. https://doi.org/10.1016/j.jhazmat.2008.12.067CrossRef

Zhang J, Yan Y, Hu ZH et al (2019) Properties and hydration behavior of Ti-extracted residues-red gypsum based cementitious materials. Constr Build Mater 218:610–617. https://doi.org/10.1016/j.conbuildmat.2019.05.099CrossRef

Gázquez MJ, Bolívar JP, Vaca F et al (2013) Evaluation of the use of TiO₂ industry red gypsum waste in cement production. Cem Concr Compos 37:76–81. https://doi.org/10.1016/j.cemconcomp.2012.12.003CrossRef

Zhang JF, Yan Y, Hu ZH (2018) Preparation and characterization of foamed concrete with Ti-extracted residues and red gypsum. Constr Build Mater 171:109–119. https://doi.org/10.1016/j.conbuildmat.2018.03.072CrossRef

Zhang YH, Wang F, Huang HW et al (2016) Gypsum blocks produced from TiO₂ production by-products. Environ Technol 37(9):1094–1100. https://doi.org/10.1080/09593330.2015.1102329CrossRef

10.

Fauziah I, Zauyah S, Jamal S (1996) Characterization and land application of red gypsum: a waste product from the titanium dioxide industry. Sci Total Environ 188:243–251. https://doi.org/10.1016/0048-9697(96)05179-0CrossRef

11.

Rodriguez-Jorda MP, Garrido F, Garcia-Gonzalez MT (2010) Potential use of gypsum and lime rich industrial by-products for induced reduction of Pb, Zn and Ni leachability in an acid soil. J Hazard Mater 175:762–769. https://doi.org/10.1016/j.jhazmat.2009.10.074CrossRef

12.

Azdarpour A, Karaei MA, Hamidi H et al (2017) CO₂ sequestration using red gypsum via pH-swing process: effect of carbonation temperature and NH₄HCO₃ on the process efficiency. Int J Miner Process 169:27–34. https://doi.org/10.1016/j.minpro.2017.09.014CrossRef

13.

Rahmani O (2018) Siderite precipitation using by-product red gypsum for CO₂ sequestration. J CO2 Util 24:321–327. https://doi.org/10.1016/j.jcou.2018.01.020CrossRef

14.

Mittal A, Rakshit D (2020) Utilization of cement rotary kiln waste heat for calcination of phosphogypsum. Therm Sci Eng Prog 20:100729. https://doi.org/10.1016/j.tsep.2020.100729CrossRef

15.

Zheng DL, Ma LP, Wang RM et al (2018) Research on thermal decomposing properties of phosphogypsum with Fe addition under multi-atmosphere control. Thermochim Acta 661:59–66. https://doi.org/10.1016/j.tca.2018.01.011CrossRef

16.

Ma XL, Tan HB, Su XM et al (2022) Recovery elemental sulfur from calcium sulfide prepared by red gypsum in sulfuric acid wastewater treatment. J Mater Cycles Waste Manag 24(4):1542–1550. https://doi.org/10.1007/s10163-022-01419-4CrossRef

17.

Ma XL, Tan HB, Dong FQ et al (2020) Influence of troilite on the decomposition of ammonium jarosite and estimated activation energy. J Therm Anal Calorim 139:933–939. https://doi.org/10.1007/s10973-019-08480-6CrossRef

18.

Ma XL, Tan HB, Dong FQ et al (2022) Influence of carbon and pyrite on desulfurization behavior of red gypsum at high temperature. J Sustain Metall 8(1):409–418. https://doi.org/10.1007/s40831-021-00483-8CrossRef

19.

Kong B, Guan BH, Yates MZ et al (2012) Control of α-calcium sulfate hemihydrate morphology using reverse microemulsions. Langmuir 28(40):14137–14142. https://doi.org/10.1021/la302459zCrossRef

20.

Petrou AL, Terzidaki A (2014) Calcium carbonate and calcium sulfate precipitation, crystallization and dissolution: evidence for the activated steps and the mechanisms from the enthalpy and entropy of activation values. Chem Geol 381:144–153. https://doi.org/10.1016/j.chemgeo.2014.05.018CrossRef

21.

Liu ST, Nancollas GH (1973) Linear crystallization and induction-period studies of the growth of calcium sulphate dihydrate crystals. Talanta 20:211–216. https://doi.org/10.1016/0039-9140(73)80268-1CrossRef

22.

Liu ST, Nancollas GH (1970) The kinetics of crystal growth of calcium sulfate dihydrate. J Cryst Growth 6:281–289. https://doi.org/10.1016/0022-0248(70)90081-3CrossRef

23.

Touzo B, Scrivener KL, Glasser FP (2013) Phase compositions and equilibria in the CaO–Al₂O₃–Fe₂O₃–SO₃ system, for assemblages containing ye’elimite and ferrite Ca₂(Al, Fe)O₅. Cement Concr Res 54:77–86. https://doi.org/10.1016/j.cemconres.2013.08.005CrossRef

24.

Zhao J, Su H, Zuo HB et al (2020) The mechanism of preparation calcium ferrite from desulfurization gypsum produced in sintering. J Clean Prod 267:959–6526. https://doi.org/10.1016/j.jclepro.2020.122002CrossRef

Titel: Preparation of calcium sulfate from recycled red gypsum to neutralize acidic wastewater and application of high silica residue
verfasst von: Chulei Wang
Xiaoling Ma
Wanzhen Zhong
Hongbin Tan
Feihua Yang
Maksim Kamarou
Dmitry Moskovskikh
Valentin Ramanovski
Publikationsdatum: 29.02.2024
Verlag: Springer Japan
Erschienen in: Journal of Material Cycles and Waste Management / Ausgabe 3/2024
Print ISSN: 1438-4957
Elektronische ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-024-01914-w

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 3/2024

Unraveling the environmental and economic impacts of fly ash utilization on mass concrete considering industry practices

Blending electric arc furnace slag and municipal incineration bottom ash to make ceramic tiles

Thermal pre-treatment of reactive aluminium alloy waste powders

Challenges and characteristics of the informal waste sector in developing countries: an overview

Immobilization of heavy metals from MSWI fly ash using a novel cementitious material: Long-term leaching behavior and mechanism

Processing and characterization of biogenic SiO2 and CaO from rice husks and eggshell waste materials