nach oben

Journal of Materials Engineering and Performance

Erschienen in:

01.02.2009

Processing Effects on Grain Refinement of AZ31 Magnesium Alloy Treated with a Commercial Al-10Sr Master Alloy

verfasst von: Mingbo Yang, Fusheng Pan

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 1/2009

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The effects of Sr amount and melt holding time on the grain refinement of AZ31 magnesium alloy treated with a commercial Al-10Sr master alloy are investigated. The effects of solutionizing, rolling, and remelting of commercial Al-10Sr master alloy on the grain refinement of AZ31 magnesium alloy are also investigated. An increase in Sr amount from 0.01 to 0.1 wt.% or melt holding time from 20 to 80 min causes the grain size of AZ31 alloy treated with the commercial Al-10Sr master alloy to gradually decrease. In addition, the solutionizing, rolling, or remelting of commercial Al-10Sr master alloy can improve the refinement efficiency of the master alloy to AZ31 alloy, and the improvement resulting from the remelting is best obvious, followed by rolling and solutionizing, respectively.

Vorheriger Artikel Combination of the Upper Bound and Potts Models for Simulation of Microstructure in Wire Drawing and Annealing Processes

Nächster Artikel Fine and Ultrafine Particle Characterization and Modeling in High-Speed Milling of 6061-T6 Aluminum Alloy

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A.A. Luo, Recent magnesium alloy development for elevated temperature applications, Inter. Mater. Reviews, 49(1), 2004, p.13–30CrossRef

M.B. Yang, F.S. Pan, J. Zhang, J. Zhang, An Analysis of the Development and Applications of Current and New Mg-Al Based Elevated Temperature Magnesium Alloys. Mater. Sci. Forum, 488–489, 2005, p.923–926CrossRef

F.S. Pan, M.B. Yang, D.F. Zhang, L.Y. Wang, P.D. Ding, Research and Development of Wrought Magnesium Alloys in China, Mater. Sci. Forum, 488–489, 2005, p.413–417CrossRef

F.S. Pan, M.B. Yang, Y.L. Ma, G.S Cole, Research and Development of Processing Technologies for Wrought Magnesium Alloys, Mater. Sci. Forum, 546–549, 2007, p.37–48CrossRef

S. Lee, S.H. Lee, D.H. Kim, Effect of Y, Sr and Nd Addition in the Microstructure and Microfracture Mechanism of Squeeze-cast AZ9lx Magnesium Alloys, Metal. Mater. Trans. A, 29,1998, p.l22l–l235CrossRef

C.A. Aliravci, E. Gruzleski, and F.C. Dimayuga, Effect of Strontium on the Shrinkage Microporosity in Magnesium Sand Castings, AFS Trans. (100), 1992, p 353–362

J.E. Gruzleski and C.A. Aliravci, Low porosity, Fine Grain Sized Strontium-Treated Magnesium Alloy Casting [P], U.S. Patent, NO5143564, 1992

A. Srinivasan, U.T. Pillai, J. Swaminathan, S.K. Das, B.C. Pai. Observations of microstructural refinement in Mg-Al-Si alloys containing strontium, J. Mater. Sci., 41, 2006, p.6087–6089CrossRef

K.Y. Nam, D.H. Song, C.W. Lee, Modification of Mg₂Si Morphology in As-cast Mg-Al-Si Alloys with Strontium and Antimony, Mater. Sci. Forum, 510–511, 2006, P.238–241CrossRef

10.

P. Zhao, Q.D. Wang, C.Q. Zai, Y.P. Zhu, Effects of strontium and titanium on the microstructure, tensile properties and creep behavior of AM50 alloys, Mater. Sci. Eng. A, 444, 2007, p.318–326CrossRef

11.

Kinji Hirai, Hidetoshi Somekaw, Yorinobu Takigaw, Effects of Ca and Sr Addition on Mechanical Properties of a Cast AZ91 Magnesium Alloy at Room and Elevated Temperature, Mater. Sci. Eng. A, 403, 2005, p.276–280CrossRef

12.

X.Q. Zeng, Y.X. Wang, W.J. Ding, Effect of strontium on the microstructure, mechanical properties, and fracture behavior of AZ31 magnesium alloys, Metal. Mater. Trans. A, 37, 2006, p.1333–1341CrossRef

13.

R.J. Cheng, A.T. Tang, M.B. Yang, F.S. Pan, Effects of Al-Sr Master Alloys on the As-cast Microstructure of the AZ31 Magnesium Alloys, Mater. Sci. Forum, 546–549, 2007, p.183–186CrossRef

14.

Z.H. Zhang, X.F. Bian, Y. Wang, Growth of dendrites in a rapidly solidified Al-23Sr alloy, J. Crystal Growth, 243, 2002, p.531–538CrossRef

15.

Z.H. Zhang, X.F. Bian, Y. Wang, Microstructural characterization of a rapidly solidified Al-Sr-Ti alloy, Mater. Res. Bulletin, 37, 2002, p. 2303–2314CrossRef

16.

J.D. Martinez, M.A. Cisneros, S. Valtierra, Effect of strontium and cooling rate upon eutectic temperatures of A319 aluminum alloy, Scripta Mater., 52, 2005,p.439–443CrossRef

17.

P. Cao, M. Qian, D.H. Stjohn, Effect of iron on grain refinement of high-purity Mg-Al alloys, Scripta Mater., 51, 2004, p.125–129CrossRef

18.

G.Y. Yuan, Z.L. Liu, Q.D. Wang, W.J. Ding, Microstructure refinement of Mg-Al-Zn-Si alloys, Mater. Letter, 56, 2002, p.53–58CrossRef

19.

J. Bai, Y.S. Sun, S. Xun, Microstructure and Tensile Behavior of Mg-4Al Based Magnesium Alloys with Alkaline-earth Elements Sr and Ca Additions, Mater. Sci. Eng. A, 419, 2006, p.181–188CrossRef

Titel: Processing Effects on Grain Refinement of AZ31 Magnesium Alloy Treated with a Commercial Al-10Sr Master Alloy
verfasst von: Mingbo Yang
Fusheng Pan
Publikationsdatum: 01.02.2009
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 1/2009
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-008-9259-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1/2009

Deposition and Characterization of HVOF Thermal Sprayed Functionally Graded Coatings Deposited onto a Lightweight Material

Evaluation of the Effects of Powder Coating Cure Temperatures on the Mechanical Properties of Aluminum Alloy Substrates

Corrosion Properties and Morphology of Laser Melted Aluminum Alloy 8022 Surface

Microhardness and Tensile Properties of a 6XXX Alloy Through Minor Additions of Zr

Room Temperature Mechanical Properties of Fe3Al Intermetallic Alloys with Li and Ni Additions

Effect of Welding Consumables on Fatigue Performance of Shielded Metal Arc Welded High Strength, Q&T Steel Joints

Premium Partner

Marktübersichten