nach oben

Lasers in Manufacturing and Materials Processing

Erschienen in:

15.04.2023 | Research

Productive Laser Machining of Sintered Carbide Using a Combination of Nanosecond and Femtosecond Laser Ablation

verfasst von: Tomas Primus, Pavel Zeman, Radka Bicistova, Frantisek Holesovsky

Erschienen in: Lasers in Manufacturing and Materials Processing | Ausgabe 2/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Short and ultrashort pulse lasers are increasingly used for cutting tool preparation. On the one hand, nanosecond lasers can ablate material very effectively but result in poor surface quality and material heat influence. On the other hand, femtosecond lasers are very precise tools with relatively low productivity. In this paper, a complex approach combining nanosecond laser roughing and femtosecond laser finishing is presented for effective sintered carbide ablation in one laser machine. The machining time was shortened by more than 74% in comparison to a femtosecond-only process. Surface roughness was decreased by more than 25% in comparison with roughness obtained after a nanosecond roughing approach. Complete removal of the heat affected zone was demonstrated by a SEM analysis of the cross-section images.

Vorheriger Artikel Fabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO2 and Diode Lasers

Nächster Artikel Characteristics of the Aluminized IN738 Superalloy Using Laser Cladding Method

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Mills, B.: Recent developments in cutting tool materials. J. Mater. Process. Technol. 56(1–4), 16–23 (1996). https://doi.org/10.1016/0924-0136(95)01816-6. (ISSN 09240136)CrossRef

Bobzin, K.: High-performance coatings for cutting tools. CIRP J. Manuf. Sci. Technol. 18, 1–9 (2017). https://doi.org/10.1016/j.cirpj.2016.11.004. (ISSN 17555817)CrossRef

Upadhyaya, G.S.: Materials science of cemented carbides — an overview. Mater. Des. 22(6), 483–489 (2001). https://doi.org/10.1016/S0261-3069(01)00007-3. (ISSN 02613069)CrossRef

Rizzo, A., Goel, S., Grilli, M.L., et al.: The critical raw materials in cutting tools for machining applications: A review. Materials 13(6), 1377 (2020). https://doi.org/10.3390/ma13061377. (ISSN 1996-1944)CrossRef

Jawahir, I.S., van Luttervelt, C.A.: Recent developments in chip control research and applications. CIRP Ann. 42(2), 659–693 (1993). https://doi.org/10.1016/S0007-8506(07)62531-1. (ISSN 00078506)CrossRef

Dumitru, G., Lüscher, B., Krack, M., Bruneau, S., Hermann, J., Gerbig, Y.: Laser processing of hardmetals: Physical basics and applications. Int. J. Refract. Met. Hard Mater. 23(4–6), 278–286 (2005). https://doi.org/10.1016/j.ijrmhm.2005.04.020. (ISSN 02634368)CrossRef

Denkena, B., Krödel, A., Ellersiek, L., Murrenhoff, M.: Production of chip breakers on cemented carbide tools using laser ablation. Procedia CIRP 94, 834–839 (2020). https://doi.org/10.1016/j.procir.2020.09.114. (ISSN 22128271)CrossRef

Zimmermann, M., Kirsch, B., Kang, Y., Herrmann, T., Aurich, J.C.: Influence of the laser parameters on the cutting edge preparation and the performance of cemented carbide indexable inserts. J. Manuf. Process. 58, 845–856 (2020). https://doi.org/10.1016/j.jmapro.2020.09.003. (ISSN 15266125)CrossRef

Karpuschewski, B., Wolf, E., Krause, M.: Laser machining of cobalt cemented tungsten carbides. In: Kimura, F., Horio, K. (eds.) Owards Synthesis of Micro-/Nano-systems:: The 11th International Conference on Precision Engineering (ICPE) August 16-18, 2006, Tokyo, Japan (Jspe Publication Series), 1st edn., pp. 243–248. Springer, Tokyo (2006) . (ISBN 978-1-84628-558-5)

10.

Fang, S., Lima, R., Sandoval, D., Bähre, D., Llanes, L.: Ablation investigation of cemented carbides using short-pulse laser beams. Procedia CIRP 68, 172–177 (2018). https://doi.org/10.1016/j.procir.2017.12.042. (ISSN 22128271)CrossRef

11.

Stankevič, V., Cermák, A., Mikalauskas, S., Kožmín, P., Indrisiunas, S., Račiukaitis, G.: Processing of ultra-hard materials with picosecond pulses: From research work to industrial applications. J. Laser Appl. 30(3), 032202 (2018). https://doi.org/10.2351/1.5040633. (ISSN 1042-346X)CrossRef

12.

Metzner, D., Lickschat, P., Weißmantel, S.: Investigations of qualitative aspects with burst mode ablation of silicon and cemented tungsten carbide. Appl. Phys. A 125(6), 4116 (2019). https://doi.org/10.1007/s00339-019-2696-4. (ISSN 0947-8396)CrossRef

13.

Brenner, A., Kurzidim, F., Fornaroli, C., Gillner, A.: Combination of short and ultrashort pulse laser processing for productive large scale structuring of 3D plastic mould steel. J. Laser Appl. 30(3), 032509 (2018). https://doi.org/10.2351/1.5040621. (ISSN 1042-346X)CrossRef

14.

Primus, T., Hlavinka, J., Zeman, P., Brajer, J., Sorm, M., Cermák, A., Kožmín, P., Holešovský, F.: Investigation of multiparameter laser stripping of AlTiN and DLC C coatings. Materials 14(4), 951 (2021). https://doi.org/10.3390/ma14040951. (ISSN 1996-1944)CrossRef

15.

Eberle, G., Wegener, K.: Ablation study of WC and PCD composites using 10 Picosecond and 1 nanosecond pulse durations at green and infrared wavelengths. Phys. Procedia 56, 951–962 (2014). https://doi.org/10.1016/j.phpro.2014.08.115. (ISSN 18753892)CrossRef

16.

Yeh, L.-Y., Hellrung, D., Gillner, A., Poprawe, R.: Development in the model-industry: Micro-machining of hard metal (WC-10%Co) by Nd:YAG-laser. ICALEO 1999(144), 144–152 (1999). https://doi.org/10.2351/1.5059296. (Laser Institute of America)CrossRef

17.

Li, T., Lou, Q., Dong, J., Wei, Y., Liu, J.: Selective removal of cobalt binder in surface ablation of tungsten carbide hardmetal with pulsed UV laser. Surf. Coat. Technol. 145(1–3), 16–23 (2001). https://doi.org/10.1016/S0257-8972(01)01288-9. (ISSN 02578972)CrossRef

18.

Yang, J.X., Miao, X.H., Wang, Z.C., Wang, X.B.: Nanosecond excimer laser ablation (W, Ti)C-Co cemented carbide. Adv. Mater. Res. 583, 333–337 (2012). https://doi.org/10.4028/www.scientific.net/AMR.583.333. (ISSN 1662-8985)CrossRef

19.

Förster, D.J., Jäggi, B., Michalowski, A., Neuenschwander, B.: Review on experimental and theoretical investigations of ultra-short pulsed laser ablation of metals with burst pulses. Materials 14(12), 333140 (2021). https://doi.org/10.3390/ma14123331. (ISSN 1996-1944)CrossRef

20.

Lickschat, P., Metzner, D., Steffen Weißmantel, S.: Burst mode ablation of stainless steel with tunable ultrashort laser pulses. J. Laser Appl. 33(2). ISSN 1042-346X (2021). https://doi.org/10.2351/7.0000271

Titel: Productive Laser Machining of Sintered Carbide Using a Combination of Nanosecond and Femtosecond Laser Ablation
verfasst von: Tomas Primus
Pavel Zeman
Radka Bicistova
Frantisek Holesovsky
Publikationsdatum: 15.04.2023
Verlag: Springer US
Erschienen in: Lasers in Manufacturing and Materials Processing / Ausgabe 2/2023
Print ISSN: 2196-7229
Elektronische ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-023-00207-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 2/2023

Multifaceted Laser Applications for Wood – A Review from Properties Analysis to Advanced Products Manufacturing

Laser-Assisted Flux-Cored Arc Welding Underwater

Effect of Build and Scan Direction on Tensile Properties of Selective Laser Melted SS316L Alloy

Laser Surface Modification of Vermicular Cast Iron to Resist Erosion

Characteristics of the Aluminized IN738 Superalloy Using Laser Cladding Method

Fabrication, Comparison, Optimization, and Applications of Conductive Graphene Patterns Induced via CO2 and Diode Lasers

Premium Partner

Marktübersichten