Skip to main content
main-content

Zeitschrift

Progress in Additive Manufacturing

Progress in Additive Manufacturing 4/2019

Ausgabe 4/2019

Inhaltsverzeichnis ( 13 Artikel )

25.10.2019 | Editorial | Ausgabe 4/2019

Editorial PIAM October 2019

Eujin Pei

13.12.2018 | Full Research Article | Ausgabe 4/2019

Integral numerical modeling of the deposition profile of a cold spraying process as an additive manufacturing technology

Weijun Zhu, Xiaoyu Zhang, Minjuan Zhang, Xiaoyong Tian, Dichen Li

07.02.2019 | Full Research Article | Ausgabe 4/2019

Experimental investigation and analysis of dimensional accuracy of laser-based powder bed fusion made specimen by application of response surface methodology

M. Hiren, M. E. Gajera, Komal G. Dave, Veera P. Jani

09.02.2019 | Review Article | Ausgabe 4/2019 Open Access

Powders for powder bed fusion: a review

Silvia Vock, Burghardt Klöden, Alexander Kirchner, Thomas Weißgärber, Bernd Kieback

06.05.2019 | Full Research Article | Ausgabe 4/2019

3D hybrid-material processing in selective laser melting: implementation of a selective coating system

Simon Girnth, Julian Koopmann, Günter Klawitter, Nils Waldt, Thomas Niendorf

07.05.2019 | Full Research Article | Ausgabe 4/2019

In-process closed-loop control for stabilising the melt pool temperature in selective laser melting

Volker Renken, Axel von Freyberg, Kevin Schünemann, Felix Pastors, Andreas Fischer

23.08.2019 | Full Research Article | Ausgabe 4/2019

Statistical analysis of spatter velocity with high-speed stereovision in laser powder bed fusion

Christopher Barrett, Carolyn Carradero, Evan Harris, Kirk Rogers, Eric MacDonald, Brett Conner

21.06.2019 | Full Research Article | Ausgabe 4/2019

The validation of the microstructural evolution of selective laser-melted AlSi10Mg on the in-house built machine: energy density studies

Ntombizodwa R. Mathe, Lerato C. Tshabalala

02.05.2019 | Full Research Article | Ausgabe 4/2019

Suitability of electrical discharge machining debris particles for usage as a powder for selective laser melting: an explorative study

Kai Oßwald, Jörg Woidasky, Anika Marie Hoffmann, Marco Moser

19.08.2019 | Full Research Article | Ausgabe 4/2019

Tailoring and investigation of defined porosity properties in thin-walled 316L structures using laser-based powder bed fusion

Eberhard Abele, Thorsten Reiber, Manfred Hampe, María Catalina Bermúdez Agudelo, Fabian Menz

09.09.2019 | Full Research Article | Ausgabe 4/2019

Thermo-mechanical simulations of selective laser melting for AlSi10Mg alloy to predict the part-scale deformations

Emrecan Soylemez, Ebubekir Koç, Mert Coşkun

14.09.2019 | Full Research Article | Ausgabe 4/2019

High-speed material jetting additive manufacturing of silicone structures: mechanical characterization

Farzad Liravi, Mehrnaz Salarian, Charles Dal Castel, Leonardo Simon, Ehsan Toyserkani

12.09.2019 | Full Research Article | Ausgabe 4/2019

Characterization of the anisotropic thermal conductivity of additively manufactured components by fused filament fabrication

Ahmed Elkholy, Mahmoud Rouby, Roger Kempers

Aktuelle Ausgaben

Premium Partner

    Marktübersichten

    Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen. 

    Bildnachweise