nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

05.08.2019 | ORIGINAL ARTICLE

Recent advancements in additive manufacturing technologies for porous material applications

verfasst von: Subhash Guddati, A. Sandeep Kranthi Kiran, Montray Leavy, Seeram Ramakrishna

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 1-4/2019

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The fabrication of porous structures by additive manufacturing (AM) technologies has been broadly explored over the past few years. Based on the application, most of the research work in AM is focused on making high-density parts with porosity values ranging from 0.1 to 5%. Because of numerous technical challenges and lack of process control/monitoring, full aids of AM in porous application industries are not yet widespread in comparison with other technologies in the same arena. However, only very limited information is available on the exact correlation between process control and final 3D object, but this is rare. In 3D technology, the exact process parameters that user needs to adapt while processing his 3D object information are very limited. In this article, we have reviewed and critically analyzed present established AM technologies for fabricating porous parts, as well as post-processing characterization techniques and its applications in detail. In-depth analysis is done on different lattice structures and process parameters those are controlling the porosity of AM parts. We have also attempted to briefly discuss on the present porous applications in filtration and purification, energy, medical, and pharmaceutical domains.

Vorheriger Artikel Study on modal analysis and chip breaking mechanism of Inconel 718 by ultrasonic vibration-assisted drilling

Nächster Artikel A novel material removal prediction method based on acoustic sensing and ensemble XGBoost learning algorithm for robotic belt grinding of Inconel 718

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Vaezi M, Seitz H, Yang S (2013) A review on 3D micro-additive manufacturing technologies. Int J Adv Manuf Technol 67(5):1721–1754. https://doi.org/10.1007/s00170-012-4605-2 CrossRef

Delgado Camacho D, Clayton P, O’Brien WJ, Seepersad C, Juenger M, Ferron R, Salamone S (2018) Applications of additive manufacturing in the construction industry – a forward-looking review. Autom Constr 89:110–119. https://doi.org/10.1016/j.autcon.2017.12.031 CrossRef

Bose S, Ke D, Sahasrabudhe H, Bandyopadhyay A (2018) Additive manufacturing of biomaterials. Prog Mater Sci 93:45–111. https://doi.org/10.1016/j.pmatsci.2017.08.003 CrossRef

Markl D, Strobel A, Schlossnikl R, Bøtker J, Bawuah P, Ridgway C, Rantanen J, Rades T, Gane P, Peiponen K-E, Zeitler JA (2018) Characterisation of pore structures of pharmaceutical tablets: a review. Int J Pharm 538(1):188–214. https://doi.org/10.1016/j.ijpharm.2018.01.017 CrossRef

Kang H-W, Park JH, Kang T-Y, Seol Y-J, Cho D-W (2012) Unit cell-based computer-aided manufacturing system for tissue engineering. Biofabrication 4(1):1–8. https://doi.org/10.1088/1758-5082/4/1/015005 CrossRef

Zhang X-Y, Fang G, Zhou J (2017) Additively manufactured scaffolds for bone tissue engineering and the prediction of their mechanical behavior: a review. Materials 10(1):50. https://doi.org/10.3390/ma10010050 CrossRef

Ker Chin A, Kah Fai L, Chee Kai C, Margam C (2006) Investigation of the mechanical properties and porosity relationships in fused deposition modelling-fabricated porous structures. Rapid Prototyp J 12(2):100–105. https://doi.org/10.1108/13552540610652447 CrossRef

Torres-Sanchez C, Al Mushref FRA, Norrito M, Yendall K, Liu Y, Conway PP (2017) The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds. Mater Sci Eng C 77:219–228. https://doi.org/10.1016/j.msec.2017.03.249 CrossRef

Kurgan N (2014) Effect of porosity and density on the mechanical and microstructural properties of sintered 316L stainless steel implant materials. Mater Des 55:235–241. https://doi.org/10.1016/j.matdes.2013.09.058 CrossRef

10.

El-Hajje A, Kolos EC, Wang JK, Maleksaeedi S, He Z, Wiria FE, Choong C, Ruys AJ (2014) Physical and mechanical characterisation of 3D-printed porous titanium for biomedical applications. J Mater Sci Mater Med 25(11):2471–2480. https://doi.org/10.1007/s10856-014-5277-2 CrossRef

11.

Lee J-W, Lee J-S, Kim M-G, Hyun S-K (2013) Fabrication of porous titanium with directional pores for biomedical applications. Mater Trans 54(2):137–142. https://doi.org/10.2320/matertrans.MC201211 CrossRef

12.

Ishizaki K, Komarneni S, Nanko M (1998) Applications of porous materials. In: Porous materials: process technology and applications. Springer US, Boston, MA, pp 181–201. https://doi.org/10.1007/978-1-4615-5811-8_5 CrossRef

13.

Stoffregen H, Fischer J, Siedelhofer C, Abele E (2011) Selective laser melting of porous structures.

14.

Yan M, Tian X, Peng G, Cao Y, Li D (2017) Hierarchically porous materials prepared by selective laser sintering. Mater Des 135:62–68. https://doi.org/10.1016/j.matdes.2017.09.015 CrossRef

15.

Van Bael S, Chai YC, Truscello S, Moesen M, Kerckhofs G, Van Oosterwyck H, Kruth JP, Schrooten J (2012) The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds. Acta Biomater 8(7):2824–2834. https://doi.org/10.1016/j.actbio.2012.04.001 CrossRef

16.

Cheah CM, Chua CK, Leong KF, Chua SW (2003) Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: parametric library and assembly program. Int J Adv Manuf Technol 21(4):302–312. https://doi.org/10.1007/s001700300035 CrossRef

17.

Cheah CM, Chua CK, Leong KF, Chua SW (2003) Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: investigation and classification. Int J Adv Manuf Technol 21(4):291–301. https://doi.org/10.1007/s001700300034 CrossRef

18.

An J, Teoh JEM, Suntornnond R, Chua CK (2015) Design and 3D printing of scaffolds and tissues. Engineering 1(2):261–268. https://doi.org/10.15302/J-ENG-2015061 CrossRef

19.

Egan PF, Gonella VC, Engensperger M, Ferguson SJ, Shea K (2017) Computationally designed lattices with tuned properties for tissue engineering using 3D printing. PLoS One 12(8):e0182902. https://doi.org/10.1371/journal.pone.0182902 CrossRef

20.

Amin Yavari S, Ahmadi SM, Wauthle R, Pouran B, Schrooten J, Weinans H, Zadpoor AA (2015) Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. J Mech Behav Biomed Mater 43:91–100. https://doi.org/10.1016/j.jmbbm.2014.12.015 CrossRef

21.

Li SJ, Xu QS, Wang Z, Hou WT, Hao YL, Yang R, Murr LE (2014) Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method. Acta Biomater 10(10):4537–4547. https://doi.org/10.1016/j.actbio.2014.06.010 CrossRef

22.

Ghouse S, Babu S, Van Arkel RJ, Nai K, Hooper PA, Jeffers JRT (2017) The influence of laser parameters and scanning strategies on the mechanical properties of a stochastic porous material. Mater Des 131:498–508. https://doi.org/10.1016/j.matdes.2017.06.041 CrossRef

23.

Xiao L, Song W (2018) Additively-manufactured functionally graded Ti-6Al-4V lattice structures with high strength under static and dynamic loading: experiments. Int J Impact Eng 111:255–272. https://doi.org/10.1016/j.ijimpeng.2017.09.018 CrossRef

24.

Nune KC, Kumar A, Misra RDK, Li SJ, Hao YL, Yang R (2017) Functional response of osteoblasts in functionally gradient titanium alloy mesh arrays processed by 3D additive manufacturing. Colloids Surf B: Biointerfaces 150:78–88. https://doi.org/10.1016/j.colsurfb.2016.09.050 CrossRef

25.

Khoda AKM, Ozbolat IT, Koc B (2013) Designing heterogeneous porous tissue scaffolds for additive manufacturing processes. Comput Aided Des 45(12):1507–1523. https://doi.org/10.1016/j.cad.2013.07.003 CrossRef

26.

Contuzzi N, Campanelli SL, Caiazzo F, Alfieri V (2019) Design and fabrication of random metal foam structures for laser powder bed fusion. Materials 12(8):1301. https://doi.org/10.3390/ma12081301 CrossRef

27.

Sachs E, Cima M, Cornie J (1990) Three-dimensional printing: rapid tooling and prototypes directly from a CAD model. CIRP Ann 39(1):201–204. https://doi.org/10.1016/S0007-8506(07)61035-X CrossRef

28.

Gibson I, Rosen D, Stucker B (2015) Additive manufacturing technologies. Springer. https://doi.org/10.1007/978-1-4939-2113-3 CrossRef

29.

Salehi M, Gupta M, Maleksaeedi S, Sharon NML (2018) Inkjet based 3D additive manufacturing of metals, vol 20. Mater Res Solid State Phys Eng. https://doi.org/10.21741/9781945291456

30.

Wang Y, Zhao YF (2017) Investigation of sintering shrinkage in binder jetting additive manufacturing process. Procedia Manufacturing 10:779–790. https://doi.org/10.1016/j.promfg.2017.07.077 CrossRef

31.

Kiran ASK, Veluru JB, Merum S, Radhamani AV, Doble M, Kumar TSS, Ramakrishna S (2018) Additive manufacturing technologies: an overview of challenges and perspective of using electrospraying. Nanocomposites 4(4):190–214. https://doi.org/10.1080/20550324.2018.1558499 CrossRef

32.

Turker M, Godlinski D, Petzoldt F (2008) Effect of production parameters on the properties of IN 718 superalloy by three-dimensional printing. Mater Charact 59(12):1728–1735. https://doi.org/10.1016/j.matchar.2008.03.017 CrossRef

33.

Xiong Y, Qian C, Sun J (2012) Fabrication of porous titanium implants by three-dimensional printing and sintering at different temperatures. Dent Mater J 31(5):815–820. https://doi.org/10.4012/dmj.2012-065 CrossRef

34.

Ziaee M, Tridas EM, Crane NB (2017) Binder-jet printing of fine stainless steel powder with varied final density. JOM 69(3):592–596. https://doi.org/10.1007/s11837-016-2177-6 CrossRef

35.

Verlee B, Dormal T, Lecomte-Beckers J (2012) Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing. Powder Metall 55(4):260–267. https://doi.org/10.1179/0032589912Z.00000000082 CrossRef

36.

Miguel C, Barbara G, Inês P, Jorge R, Manuel P (2015) The role of shell/core saturation level on the accuracy and mechanical characteristics of porous calcium phosphate models produced by 3D printing. Rapid Prototyp J 21(1):43–55. https://doi.org/10.1108/RPJ-02-2013-0015 CrossRef

37.

Zhang W, Melcher R, Travitzky N, Bordia RK, Greil P (2009) Three-dimensional printing of complex-shaped alumina/glass composites. Adv Eng Mater 11(12):1039–1043. https://doi.org/10.1002/adem.200900213 CrossRef

38.

Asadi-Eydivand M, Solati-Hashjin M, Farzad A, Abu Osman NA (2016) Effect of technical parameters on porous structure and strength of 3D printed calcium sulfate prototypes. Robot Comput Integr Manuf 37:57–67. https://doi.org/10.1016/j.rcim.2015.06.005 CrossRef

39.

Farzadi A, Waran V, Solati-Hashjin M, Rahman ZAA, Asadi M, Osman NAA (2015) Effect of layer printing delay on mechanical properties and dimensional accuracy of 3D printed porous prototypes in bone tissue engineering. Ceram Int 41(7):8320–8330. https://doi.org/10.1016/j.ceramint.2015.03.004 CrossRef

40.

Vangapally S, Agarwal K, Sheldon A, Cai S (2017) Effect of lattice design and process parameters on dimensional and mechanical properties of binder jet additively manufactured stainless steel 316 for bone scaffolds. Procedia Manufacturing 10:750–759. https://doi.org/10.1016/j.promfg.2017.07.069 CrossRef

41.

Suwanprateeb J, Chumnanklang R (2006) Three-dimensional printing of porous polyethylene structure using water-based binders. J Biomed Mater Res B Appl Biomater 78B(1):138–145. https://doi.org/10.1002/jbm.b.30469 CrossRef

42.

Hong D, Chou D-T, Velikokhatnyi OI, Roy A, Lee B, Swink I, Issaev I, Kuhn HA, Kumta PN (2016) Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys. Acta Biomater 45:375–386. https://doi.org/10.1016/j.actbio.2016.08.032 CrossRef

43.

Seitz H, Rieder W, Irsen S, Leukers B, Tille C (2005) Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res B Appl Biomater 74B(2):782–788. https://doi.org/10.1002/jbm.b.30291 CrossRef

44.

Spears TG, Gold SA (2016) In-process sensing in selective laser melting (SLM) additive manufacturing. Integr Mater Manuf Innov 5(1). https://doi.org/10.1186/s40192-016-0045-4 CrossRef

45.

Gu DD, Meiners W, Wissenbach K, Poprawe R (2012) Laser additive manufacturing of metallic components: materials, processes and mechanisms. Int Mater Rev 57(3):133–164. https://doi.org/10.1179/1743280411Y.0000000014 CrossRef

46.

Bikas H, Stavropoulos P, Chryssolouris G (2016) Additive manufacturing methods and modelling approaches: a critical review. Int J Adv Manuf Technol 83(1):389–405. https://doi.org/10.1007/s00170-015-7576-2 CrossRef

47.

Kruth JP, Levy G, Klocke F, Childs THC (2007) Consolidation phenomena in laser and powder-bed based layered manufacturing. CIRP Ann 56(2):730–759. https://doi.org/10.1016/j.cirp.2007.10.004 CrossRef

48.

Shirazi SFS, Gharehkhani S, Mehrali M, Yarmand H, Metselaar HSC, Adib Kadri N, Osman NAA (2015) A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing. Sci Technol Adv Mater 16(3):033502. https://doi.org/10.1088/1468-6996/16/3/033502 CrossRef

49.

M.M. S, L. H, P.M. D, Y. Z, K.E. T, R.A. H (2012) The effects and interactions of fabrication parameters on the properties of selective laser sintered hydroxyapatite polyamide composite biomaterials. Rapid Prototyp J 18 (1):16–27. https://doi.org/10.1108/13552541211193467 CrossRef

50.

E. TA, T.H.C. C (2001) Density prediction of crystalline polymer sintered parts at various powder bed temperatures. Rapid Prototyp J 7 (3):180–184. doi:https://doi.org/10.1108/13552540110395637 CrossRef

51.

Yadroitsev I, Shishkovsky I, Bertrand P, Smurov I (2009) Manufacturing of fine-structured 3D porous filter elements by selective laser melting. Appl Surf Sci 255(10):5523–5527. https://doi.org/10.1016/j.apsusc.2008.07.154 CrossRef

52.

Spierings A, Wegener K, Levy G (2012) Designing material properties locally with additive manufacturing technology SLM. https://doi.org/10.3929/ethz-a-010335595

53.

Abele E, Stoffregen HA, Kniepkamp M, Lang S, Hampe M (2015) Selective laser melting for manufacturing of thin-walled porous elements. J Mater Process Technol 215:114–122. https://doi.org/10.1016/j.jmatprotec.2014.07.017 CrossRef

54.

Gu D (2015) Laser additive manufacturing (AM): classification, processing philosophy, and metallurgical mechanisms. In: Gu D (ed) Laser additive manufacturing of high-performance materials. Springer, Berlin Heidelberg, Berlin, Heidelberg, pp 15–71. https://doi.org/10.1007/978-3-662-46089-4_2 CrossRef

55.

Cunningham R, Nicolas A, Madsen J, Fodran E, Anagnostou E, Sangid MD, Rollett AD (2017) Analyzing the effects of powder and post-processing on porosity and properties of electron beam melted Ti-6Al-4V. Mater Res Lett 5(7):516–525. https://doi.org/10.1080/21663831.2017.1340911 CrossRef

56.

Bandyopadhyay A, Krishna BV, Xue W, Bose S (2008) Application of laser engineered net shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants. J Mater Sci Mater Med 20(1):29. https://doi.org/10.1007/s10856-008-3478-2 CrossRef

57.

Das M, Balla VK, Kumar TSS, Manna I (2013) Fabrication of biomedical implants using Laser Engineered Net Shaping (LENS™). T Indian Ceram Soc 72(3):169–174. https://doi.org/10.1080/0371750X.2013.851619 CrossRef

58.

España FA, Balla VK, Bose S, Bandyopadhyay A (2010) Design and fabrication of CoCrMo alloy based novel structures for load bearing implants using laser engineered net shaping. Mater Sci Eng C 30(1):50–57. https://doi.org/10.1016/j.msec.2009.08.006 CrossRef

59.

Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B 143:172–196. https://doi.org/10.1016/j.compositesb.2018.02.012 CrossRef

60.

Kojima M, Narahara H, Nakao Y, Fukumaru H, Koresawa H, Suzuki H, Abe S (2008) Permeability characteristics and applications of plastic injection molding fabricated by metal laser sintering combined with high speed milling. Int J Autom Technol 2:175–181. https://doi.org/10.20965/ijat.2008.p0175 CrossRef

61.

Narahara H, Takeshita S, Fukumaru H, Koresawa H, Suzuki H (2012) Permeability performance on porous structure of injection mold fabricated by metal laser sintering combined with high speed milling. Int J Autom Technol 6(5):576–583. https://doi.org/10.20965/ijat.2012.p0576 CrossRef

62.

Jafari D, Wits W, Geurts JB (2017) An investigation of porous structure characteristics of heat pipes made by additive manufacturing. International Workshop on Thermal Investigations of ICs and Systems (THERMINIC) :1–7. https://doi.org/10.1109/THERMINIC.2017.8233841

63.

Ameli M, Agnew B, Leung PS, Ng B, Sutcliffe CJ, Singh J, McGlen R (2013) A novel method for manufacturing sintered aluminium heat pipes (SAHP). Appl Therm Eng 52(2):498–504. https://doi.org/10.1016/j.applthermaleng.2012.12.011 CrossRef

64.

Calignano F, Tommasi T, Manfredi D, Chiolerio A (2015) Additive manufacturing of a microbial fuel cell-a detailed study. Sci Rep 5:17373. https://doi.org/10.1038/srep17373 CrossRef

65.

Yashiro N, Usui T, Kikuta K (2010) Application of a thin intermediate cathode layer prepared by inkjet printing for SOFCs. J Eur Ceram Soc 30(10):2093–2098. https://doi.org/10.1016/j.jeurceramsoc.2010.04.012 CrossRef

66.

Delannoy PE, Riou B, Brousse T, Le Bideau J, Guyomard D, Lestriez B (2015) Ink-jet printed porous composite LiFePO₄ electrode from aqueous suspension for microbatteries. J Power Sources 287:261–268. https://doi.org/10.1016/j.jpowsour.2015.04.067 CrossRef

67.

Liu C, Cheng X, Li B, Chen Z, Mi S, Lao C (2017) Fabrication and characterization of 3D-printed highly-porous 3D LiFePO₄ electrodes by low temperature direct writing process. Materials 10(8):934. https://doi.org/10.3390/ma10080934 CrossRef

68.

Wang X, Xu S, Zhou S, Xu W, Leary M, Choong P, Qian M, Brandt M, Xie Y (2016) Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review. Biomaterials 83:127–141. https://doi.org/10.1016/j.biomaterials.2016.01.012 CrossRef

69.

Sun K, Wei T-S, Ahn BY, Seo JY, Dillon SJ, Lewis JA (2013) 3D Printing of interdigitated Li-ion microbattery architectures. Adv Mater 25(33):4539–4543. https://doi.org/10.1002/adma.201301036 CrossRef

70.

You J, Preen RJ, Bull L, Greenman J, Ieropoulos I (2017) 3D printed components of microbial fuel cells: towards monolithic microbial fuel cell fabrication using additive layer manufacturing. Sustain Energy Technol Assessments 19:94–101. https://doi.org/10.1016/j.seta.2016.11.006 CrossRef

71.

Burns N, Burns M, Travis D, Geekie L, Rennie A, Weston DP (2013) Novel filter designs that deliver filtration benefits produced by metal additive manufacturing. Proceedings of AFS 2013 Fall Conference: Innovation in Filter Media and Membranes:194–217

72.

Obaton AF, Fain J, Djemaï M, Meinel D, Léonard F, Mahé E, Lécuelle B, Fouchet JJ, Bruno G (2017) In vivo XCT bone characterization of lattice structured implants fabricated by additive manufacturing. Heliyon 3(8):e00374. https://doi.org/10.1016/j.heliyon.2017.e00374 CrossRef

73.

Burns N (2014) Why AM now has the potential to revolutionise filtration solutions. Filtration + Separation 51(2):42–43. https://doi.org/10.1016/S0015-1882(14)70073-4 CrossRef

74.

Burns N, Burns M, Travis D, Geekie L, Rennie AEW (2016) Designing advanced filtration media through metal additive manufacturing. Chem Eng Technol 39(3):535–542. https://doi.org/10.1002/ceat.201500353 CrossRef

75.

Burns NR, Burns MA, Travis D, Geekie LE, Rennie AEW AM: applications & materials: innovations in filtration through additive manufacturing. In, Shrewsbury, 2014 2014. The European Powder Metallurgy Association, pp 1–6

76.

Nandwana P, Kirka M, Okello A, Dehoff R (2018) Electron beam melting of Inconel 718: effects of processing and post-processing. Mater Sci Technol:1–8. https://doi.org/10.1080/02670836.2018.1424379 CrossRef

77.

Polonsky AT, Echlin MP, Lenthe WC, Dehoff RR, Kirka MM, Pollock TM Defects and 3D structural inhomogeneity in electron beam additively manufactured Inconel 718. Mater Charact. https://doi.org/10.1016/j.matchar.2018.02.020 CrossRef

78.

Low Z-X, Chua YT, Ray BM, Mattia D, Metcalfe IS, Patterson DA (2017) Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques. J Membr Sci 523:596–613. https://doi.org/10.1016/j.memsci.2016.10.006 CrossRef

79.

Klahn C, Bechmann F, Hofmann S, Dinkel M, Emmelmann C (2013) Laser additive manufacturing of gas permeable structures. Phys Procedia 41:873–880. https://doi.org/10.1016/j.phpro.2013.03.161 CrossRef

80.

Manogharan G, Kioko M, Linkous C (2015) Binder jetting: a novel solid oxide fuel-cell fabrication process and evaluation. JOM 67(3):660–667. https://doi.org/10.1007/s11837-015-1296-9 CrossRef

81.

Rahimnejad M, Adhami A, Darvari S, Zirepour A, Oh S-E (2015) Microbial fuel cell as new technology for bioelectricity generation: a review. Alex Eng J 54(3):745–756. https://doi.org/10.1016/j.aej.2015.03.031 CrossRef

82.

Bian B, Shi D, Cai X, Hu M, Guo Q, Zhang C, Wang Q, Sun AX, Yang J (2018) 3D printed porous carbon anode for enhanced power generation in microbial fuel cell. Nano Energy 44:174–180. https://doi.org/10.1016/j.nanoen.2017.11.070 CrossRef

83.

Zhou Y, Tang L, Liu Z, Hou J, Chen W, Li Y, Sang L (2017) A novel anode fabricated by three-dimensional printing for use in urine-powered microbial fuel cell. Biochem Eng J 124:36–43. https://doi.org/10.1016/j.bej.2017.04.012 CrossRef

84.

Zhang F, Wei M, Viswanathan VV, Swart B, Shao Y, Wu G, Zhou C (2017) 3D printing technologies for electrochemical energy storage. Nano Energy 40:418–431. https://doi.org/10.1016/j.nanoen.2017.08.037 CrossRef

85.

Liu X, Jervis R, Maher RC, Villar-Garcia IJ, Naylor-Marlow M, Shearing PR, Ouyang M, Cohen L, Brandon NP, Wu B (2016) 3D-printed structural pseudocapacitors. Advanced Materials Technologies 1 (9):1600167-n/a. https://doi.org/10.1002/admt.201600167 CrossRef

86.

Azhari A, Marzbanrad E, Yilman D, Toyserkani E, Pope MA (2017) Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes. Carbon 119:257–266. https://doi.org/10.1016/j.carbon.2017.04.028 CrossRef

87.

Kumar A, Mandal S, Barui S, Vasireddi R, Gbureck U, Gelinsky M, Basu B (2016) Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: processing related challenges and property assessment. Mater Sci Eng R Rep 103:1–39. https://doi.org/10.1016/j.mser.2016.01.001 CrossRef

88.

Esch C, Galperin A, Krolitzki B, Glasmacher B, Shen A, Ratner BD (2013) Proof of concept of a new glucose sensing technology: color-changing hydrogels including Au nanoparticles. Biomedical Engineering/Biomedizinische Technik. https://doi.org/10.1515/bmt-2013-4063

89.

Wauthle R, van der Stok J, Amin Yavari S, Van Humbeeck J, Kruth J-P, Zadpoor AA, Weinans H, Mulier M, Schrooten J (2015) Additively manufactured porous tantalum implants. Acta Biomater 14:217–225. https://doi.org/10.1016/j.actbio.2014.12.003 CrossRef

90.

Ahmadi SM, Amin Yavari S, Wauthle R, Pouran B, Schrooten J, Weinans H, Zadpoor AA (2015) Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: the mechanical and morphological properties. Materials 8(4):1871–1896. https://doi.org/10.3390/ma8041871 CrossRef

91.

Li JP, Habibovic P, van den Doel M, Wilson CE, de Wijn JR, van Blitterswijk CA, de Groot K (2007) Bone ingrowth in porous titanium implants produced by 3D fiber deposition. Biomaterials 28(18):2810–2820. https://doi.org/10.1016/j.biomaterials.2007.02.020 CrossRef

92.

Mour M, Das D, Winkler T, Hoenig E, Mielke G, Morlock MM, Schilling AF (2010) Advances in porous biomaterials for dental and orthopaedic applications. Materials 3(5):2947. https://doi.org/10.3390/ma3052947 CrossRef

93.

Bhargav A, Sanjairaj V, Rosa V, Feng LW, Fuh Yh J Applications of additive manufacturing in dentistry: a review. J Biomed Mater Res Part B. https://doi.org/10.1002/jbm.b.33961 CrossRef

94.

Traini T, Mangano C, Sammons RL, Mangano F, Macchi A, Piattelli A (2008) Direct laser metal sintering as a new approach to fabrication of an isoelastic functionally graded material for manufacture of porous titanium dental implants. Dent Mater 24(11):1525–1533. https://doi.org/10.1016/j.dental.2008.03.029 CrossRef

95.

Cheah CM, Leong KF, Chua CK, Low KH, Quek HS (2002) Characterization of microfeatures in selective laser sintered drug delivery devices. Proc Inst Mech Eng H J Eng Med 216(6):369–383. https://doi.org/10.1243/095441102321032166 CrossRef

96.

Fina F, Goyanes A, Gaisford S, Basit AW (2017) Selective laser sintering (SLS) 3D printing of medicines. Int J Pharm 529(1):285–293. https://doi.org/10.1016/j.ijpharm.2017.06.082 CrossRef

97.

Ma J (2015) Review of permeability evolution model for fractured porous media. J Rock Mech Geotech Eng 7(3):351–357. https://doi.org/10.1016/j.jrmge.2014.12.003 MathSciNetCrossRef

98.

Monzón MD, Ortega Z, Martínez A, Ortega F (2015) Standardization in additive manufacturing: activities carried out by international organizations and projects. Int J Adv Manuf Technol 76(5):1111–1121. https://doi.org/10.1007/s00170-014-6334-1 CrossRef

99.

Spierings AB, Schneider M, Eggenberger R (2011) Comparison of density measurement techniques for additive manufactured metallic parts. Rapid Prototyp J 17(5):380–386. https://doi.org/10.1108/13552541111156504 CrossRef

100.

Williams CB, Cochran JK, Rosen DW (2011) Additive manufacturing of metallic cellular materials via three-dimensional printing. Int J Adv Manuf Technol 53(1):231–239. https://doi.org/10.1007/s00170-010-2812-2 CrossRef

101.

Slotwinski JA, Garboczi EJ, Hebenstreit KM (2014) Porosity measurements and analysis for metal additive manufacturing process control. J Res Natl Inst Stand Technol 119:494–528. https://doi.org/10.6028/jres.119.019 CrossRef

102.

Manfredi D, Calignano F, Ambrosio EP, Krishnan M, Canali R, Biamino S, Pavese M, Atzeni E, Iuliano L, Fino P, Badini C (2013) Direct metal laser sintering: an additive manufacturing technology ready to produce lightweight structural parts for robotic applications. La Metallurgia Italiana 10:15–24

103.

Paul CP, Mishra SK, Premsingh CH, Bhargava P, Tiwari P, Kukreja LM (2012) Studies on laser rapid manufacturing of cross-thin-walled porous structures of Inconel 625. Int J Adv Manuf Technol 61(5):757–770. https://doi.org/10.1007/s00170-011-3742-3 CrossRef

104.

Giesche H (2006) Mercury porosimetry: a general (practical) overview. Part Part Syst Charact 23(1):9–19. https://doi.org/10.1002/ppsc.200601009 CrossRef

105.

Jande YAC, Erdal M, Dag S (2014) Production of graded porous polyamide structures and polyamide-epoxy composites via selective laser sintering. J Reinf Plast Compos 33(11):1017–1036. https://doi.org/10.1177/0731684414522536 CrossRef

106.

Kim TB, Yue S, Zhang Z, Jones E, Jones JR, Lee PD (2014) Additive manufactured porous titanium structures: through-process quantification of pore and strut networks. J Mater Process Technol 214(11):2706–2715. https://doi.org/10.1016/j.jmatprotec.2014.05.006 CrossRef

107.

Furumoto T, Koizumi A, Alkahari MR, Anayama R, Hosokawa A, Tanaka R, Ueda T (2015) Permeability and strength of a porous metal structure fabricated by additive manufacturing. J Mater Process Technol 219:10–16. https://doi.org/10.1016/j.jmatprotec.2014.11.043 CrossRef

108.

Ramakrishnaiah R, Al kheraif AA, Mohammad A, Divakar DD, Kotha SB, Celur SL, Hashem MI, Vallittu PK, Rehman IU (2017) Preliminary fabrication and characterization of electron beam melted Ti–6Al–4V customized dental implant. Saudi J Biol Sci 24(4):787–796. https://doi.org/10.1016/j.sjbs.2016.05.001 CrossRef

109.

Valdez M, Kozuch C, Faierson EJ, Jasiuk I (2017) Induced porosity in Super Alloy 718 through the laser additive manufacturing process: microstructure and mechanical properties. J Alloys Compd 725:757–764. https://doi.org/10.1016/j.jallcom.2017.07.198 CrossRef

110.

Seo J-Y, Shim D-S (2018) Effect of track spacing on porosity of metallic foam fabricated by laser melting deposition of Ti6Al4V/TiH2 powder mixture. Vacuum 154:200–207. https://doi.org/10.1016/j.vacuum.2018.04.058 CrossRef

111.

Kruth JP, Bartscher M, Carmignato S, Schmitt R, De Chiffre L, Weckenmann A (2011) Computed tomography for dimensional metrology. CIRP Ann 60(2):821–842. https://doi.org/10.1016/j.cirp.2011.05.006 CrossRef

112.

Butscher A, Bohner M, Doebelin N, Hofmann S, Müller R (2013) New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes. Acta Biomater 9(11):9149–9158. https://doi.org/10.1016/j.actbio.2013.07.019 CrossRef

113.

Damon J, Dietrich S, Vollert F, Gibmeier J, Schulze V (2018) Process dependent porosity and the influence of shot peening on porosity morphology regarding selective laser melted AlSi10Mg parts. Addit Manuf 20:77–89. https://doi.org/10.1016/j.addma.2018.01.001 CrossRef

114.

Zanini F, Sbettega E, Carmignato S (2018) X-ray computed tomography for metal additive manufacturing: challenges and solutions for accuracy enhancement. Procedia CIRP 75:114–118. https://doi.org/10.1016/j.procir.2018.04.050 CrossRef

115.

Kim FH, Moylan SP, Garboczi EJ, Slotwinski JA (2017) Investigation of pore structure in cobalt chrome additively manufactured parts using X-ray computed tomography and three-dimensional image analysis. Addit Manuf 17:23–38. https://doi.org/10.1016/j.addma.2017.06.011 CrossRef

116.

Ziółkowski G, Chlebus E, Szymczyk P, Kurzac J (2014) Application of X-ray CT method for discontinuity and porosity detection in 316L stainless steel parts produced with SLM technology. Arch Civil Mech Eng 14(4):608–614. https://doi.org/10.1016/j.acme.2014.02.003 CrossRef

117.

Thompson A, Maskery I, Leach RK (2016) X-ray computed tomography for additive manufacturing: a review. Meas Sci Technol 27(7):072001. https://doi.org/10.1088/0957-0233/27/7/072001 CrossRef

118.

Childs EC, Collis-George N (1950) The permeability of porous materials. Proceedings of the Royal Society of London Series A Mathematical and Physical Sciences 201(1066):392–405. https://doi.org/10.1098/rspa.1950.0068 CrossRef

119.

Joseph J, Siva Kumar Gunda N, Mitra SK (2013) On-chip porous media: porosity and permeability measurements. Chem Eng Sci 99:274–283. https://doi.org/10.1016/j.ces.2013.05.065 CrossRef

120.

Pal L, Joyce MK, Fleming P (2006) A simple method for calculation of the permeability coefficient of porous media. TAPPI J 5

Titel: Recent advancements in additive manufacturing technologies for porous material applications
verfasst von: Subhash Guddati
A. Sandeep Kranthi Kiran
Montray Leavy
Seeram Ramakrishna
Publikationsdatum: 05.08.2019
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 1-4/2019
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04116-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 1-4/2019

The use of support vector machine, neural network, and regression analysis to predict and optimize surface roughness and cutting forces in milling

Improved thermal FE numerical model/DoE based on the Taguchi method to estimate weld penetration/energy and non-metallic inclusions: a case study in Ti-containing TWIP steel butt joints

Evaluation of different heat treatment cycles on improving single point incremental forming of AA6061 aluminum alloy

An investigation of stress condition in vibration-assisted burnishing

A data framework for environmental assessment of metal arc welding processes and welded structures during the design phase

An augmented reality tool to detect and annotate design variations in an Industry 4.0 approach

Premium Partner

Marktübersichten