nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

03.06.2020 | ORIGINAL ARTICLE

Research on laser welding process and molding effect under energy deviation

verfasst von: Shuquan Ding, Deyong You, Fengshi Cai, Huachang Wu, Xiangdong Gao, Tianxiang Bai

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 5-6/2020

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In order to further understand the energy deviation characteristics and internal laws in the process of high-power disk laser deep penetration welding, a multisensory fusion system was set up to monitor and analyze the variation of the energy in the different depth of the keyhole. Two different sensing technologies were integrated. The first was photodiode sensing for the monitoring of light radiation which was generated from laser focus position. The second was visual sensing based on auxiliary illumination for the monitoring of the dynamic behavior of the molten pool and metallic plume. The result shows that the large amount of evaporation caused by the preheating effect is one of the reasons for the welding instability. How to effectively control the evaporation is the key to the stabilization of the energy distribution and the improvement of the welding instability. The metallographic microstructure of the cross section has a good match for analysis of the signal.

Vorheriger Artikel Electrophoretic deposition of PEEK/bioactive glass composite coatings on stainless steel for orthopedic applications: an optimization for in vitro bioactivity and adhesion strength

Nächster Artikel Study on cutting speed and energy utilization rate in processing stainless steel with abrasive water jet

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Riahi M, Amini A (2013) Effect of different combinations of tailor-welded blank coupled with change in weld location on mechanical properties by laser welding. Int J Adv Manuf Technol 67:1937–1945. https://doi.org/10.1007/s00170-012-4620-3 CrossRef

Zou J, Ha N, Xiao R, Wu Q, Zhang Q (2017) Interaction between the laser beam and keyhole wall during high power fiber laser keyhole welding. Opt Express 25:17650. https://doi.org/10.1364/OE.25.017650 CrossRef

Li C, Liu L (2013) Investigation on weldability of magnesium alloy thin sheet T-joints: arc welding, laser welding, and laser-arc hybrid welding. Int J Adv Manuf Technol 65:27–34. https://doi.org/10.1007/s00170-012-4145-9 CrossRef

Shao Y, Wang Z, Zhang Y (2011) Monitoring of liquid droplets in laser-enhanced GMAW. Int J Adv Manuf Technol 57:203–214. https://doi.org/10.1007/s00170-011-3266-x CrossRef

Çam G, İpekoğlu G (2017) Recent developments in joining of aluminum alloys. Int J Adv Manuf Technol 91:1851–1866. https://doi.org/10.1007/s00170-016-9861-0 CrossRef

You D, Gao X, Katayama S (2016) Data-driven based analyzing and modeling of MIMO laser welding process by integration of six advanced sensors. Int J Adv Manuf Technol 82:1127–1139. https://doi.org/10.1007/s00170-015-7455-x CrossRef

Bunaziv I, Frostevarg J, Akselsen OM, Kaplan AFH (2018) Process stability during fiber laser-arc hybrid welding of thick steel plates. Opt Lasers Eng 102:34–44. https://doi.org/10.1016/j.optlaseng.2017.10.020 CrossRef

Gu X, Di Y, Luo J (2019) Study on the alternative burning behavior of arcs in hybrid laser–double-arc welding. Int J Adv Manuf Technol 102:2581–2590. https://doi.org/10.1007/s00170-019-03330-z CrossRef

Kaplan AFH (2012) Fresnel absorption of 1 μm- and 10 μm-laser beams at the keyhole wall during laser beam welding: comparison between smooth and wavy surfaces. Appl Surf Sci 258:3354–3363. https://doi.org/10.1016/j.apsusc.2011.08.086 CrossRef

10.

Fotovvati B, Wayne SF, Lewis G, Asadi E (2018) A review on melt-pool characteristics in laser welding of metals. Adv Mater Sci Eng 2018:1–18. https://doi.org/10.1155/2018/4920718 CrossRef

11.

Stavridis J, Papacharalampopoulos A, Stavropoulos P (2018) Quality assessment in laser welding: a critical review. Int J Adv Manuf Technol 94:1825–1847. https://doi.org/10.1007/s00170-017-0461-4 CrossRef

12.

Katayama S, Kawahito Y (2009) Elucidation of phenomena in high-power fiber laser welding and development of prevention procedures of welding defects, 2009[C]. SPIE, Bellingham

13.

Matsunawa A, Kim J, Seto N, Mizutani M, Katayama S (1998) Dynamics of keyhole and molten pool in laser welding. J Laser Appl 10:247–254. https://doi.org/10.2351/1.521858

14.

Zhang LJ, Zhang JX, Gumenyuk A, Rethmeier M, Na SJ (2014) Numerical simulation of full penetration laser welding of thick steel plate with high power high brightness laser. J Mater Process Technol 214:1710–1720. https://doi.org/10.1016/j.jmatprotec.2014.03.016

15.

Shcheglov PY, Uspenskiy SA, Gumenyuk AV, Petrovskiy VN, Rethmeier M, Yermachenko VM (2011) Plume attenuation of laser radiation during high power fiber laser welding. Laser Phys Lett 8: 475–480. https://doi.org/10.1002/lapl.201110010

16.

Kawahito Y, Matsumoto N, Mizutani M, Katayama S (2013) Characterisation of plasma induced during high power fibre laser welding of stainless steel. Sci Technol Weld Join 13:744–748. https://doi.org/10.1179/136217108X329313

17.

Li S, Chen G, Katayama S, Zhang Y (2014) Relationship between spatter formation and dynamic molten pool during high-power deep-penetration laser welding. Appl Surf Sci 303:481–488. https://doi.org/10.1016/j.apsusc.2014.03.030

18.

Wu D, Hua X, Huang L, Zhao J (2018) Numerical simulation of spatter formation during fiber laser welding of 5083 aluminum alloy at full penetration condition. Opt Laser Technol 100:157– 164. https://doi.org/10.1016/j.optlastec.2017.10.010

19.

Semak V, Matsunawa A (1997) The role of recoil pressure in energy balance during laser materials processing. J Phys D Appl Phys 30:2541–2552. https://doi.org/10.1088/0022-3727/30/18/008

20.

Wang H, Nakanishi M, Kawahito Y (2018) Dynamic balance of heat and mass in high power density laser welding. Opt Express 26:6392–6399. https://doi.org/10.1364/OE.26.006392

21.

Pang S, Chen X, Li W, Shao X, Gong S (2016) Efficient multiple time scale method for modeling compressible vapor plume dynamics inside transient keyhole during fiber laser welding. Opt Laser Technol 77:203–214. https://doi.org/10.1016/j.optlastec.2015.09.024

22.

Pang S, Chen L, Zhou J, Yin Y, Chen T (2011) A three-dimensional sharp interface model for self-consistent keyhole and weld pool dynamics in deep penetration laser welding. J Phys D Appl Phys 44:25301. https://doi.org/10.1088/0022-3727/44/2/025301

23.

Powell J, Ilar T, Frostevarg J, Torkamany MJ, Na S, Petring D, Zhang L, et al (2015) Weld root instabilities in fiber laser welding. J Laser Appl 27:S29008. https://doi.org/10.2351/1.4906390

24.

Zhang M, Chen G, Zhou Y, Li S (2013) Direct observation of keyhole characteristics in deep penetration laser welding with a 10 kW fiber laser. Opt Express 21:19997–20004. https://doi.org/10.1364/OE.21.019997

25.

Zou JL, He Y, Wu SK, Huang T, Xiao RS. (2015) Experimental and theoretical characterization of deep penetration welding threshold induced by 1-μm laser. Appl Surf Sci 357:1522–1527. https://doi.org/10.1016/j.apsusc.2015.09.198

26.

Dowden J, Kapadia P, Clucas A, Ducharme R, Steen WM (1996) On the relation between fluid dynamic pressure and the formation of pores in laser keyhole welding. J Laser Appl 8:183–190. https://doi.org/10.2351/1.4745420

27.

Zou J, Yang W, Wu S, He Y, Xiao R (2016) Effect of plume on weld penetration during high-power fiber laser welding. J Laser Appl 28:22003. https://doi.org/10.2351/1.4940148

28.

Sun J, Feng K, Zhang K, Guo B, Jiang E, Nie P, Huang J et al (2017) Fiber laser welding of thick AISI 304 plate in a horizontal (2G) butt joint configuration. Mater Des 118:53–65. https://doi.org/10.1016/j.matdes.2017.01.015

29.

Abe H, Watanabe Y (2012) Role of δ -ferrite in stress corrosion cracking retardation near fusion boundary of 316NG welds. J Nucl Mater 424:57–61. https://doi.org/10.1016/j.jnucmat.2012.02.006

30.

Liu S, Mi G, Yan F, Wang C, Li P (2018) Real weld geometry determining mechanical properties of high power laser welded medium plates. Optics Laser Technol 102:100–110. https://doi.org/10.1016/j.optlastec.2017.11.047

31.

Shah A, Kumar A, Ramkumar J (2018) Analysis of transient thermo-fluidic behavior of melt pool during spot laser welding of 304 stainless-steel. J Mater Process Technol 256:109–120. https://doi.org/10.1016/j.jmatprotec.2018.02.005

32.

He X, Fuerschbach PW, DebRoy T (2003) Heat transfer and fluid flow during laser spot welding of 304 stainless steel. J Phys D Appl Phys 36:1388–1398. https://doi.org/10.1088/0022-3727/36/12/306

33.

Alizadeh-Sh M, Marashi SPH, Pouranvari M (2014) Resistance spot welding of AISI 430 ferritic stainless steel: phase transformations and mechanical properties. Mater Des (1980–2015) 56:258–263. https://doi.org/10.1016/j.matdes.2013.11.022

Titel: Research on laser welding process and molding effect under energy deviation
verfasst von: Shuquan Ding
Deyong You
Fengshi Cai
Huachang Wu
Xiangdong Gao
Tianxiang Bai
Publikationsdatum: 03.06.2020
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 5-6/2020
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-020-05431-6

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5-6/2020

Double-sided self-pierce riveting

Study on cutting speed and energy utilization rate in processing stainless steel with abrasive water jet

A new process chain combining cross-wedge rolling and isothermal forging for the forming of titanium alloy turbine blades

Research on the local formability of Al-Mg-Si alloy sheet during rapid hot gas forming

Geometric error compensation of five-axis ball-end milling based on tool orientation optimization and tool path smoothing

Accuracy improvement of robotic machining based on robot’s structural properties

Premium Partner

Marktübersichten