nach oben

The International Journal of Advanced Manufacturing Technology

Erschienen in:

11.01.2022 | Critical Review

Research progress of transition layer and filler wire for laser welding of steel and aluminum dissimilar metals

verfasst von: Yaowu Zhao, Yuhong Long, Zhaoyan Li

Erschienen in: The International Journal of Advanced Manufacturing Technology | Ausgabe 7-8/2022

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Steel-aluminum dissimilar metal welding has a robust application demand in automobile lightweight. However, the formation of Fe-Al intermetallic compounds (IMCs) reduces the steel-aluminum welded joint’s mechanical properties (tensile strength or linear load). This paper reviews the research results of transition layer and filler wire in improving the mechanical properties of steel-aluminum laser welding joint (SALWD). The mechanism of improving the mechanical properties of SALWD by filler wire and transition layer is summarized. The transition layer’s development direction uses multi-element, trace rare earth elements and high-strength fiber. The development direction of filler wire is to develop the low melting point, good wettability, and high-strength filler wire. This article has reference value for researching dissimilar metal welding and transition layer and welding wire materials.

Vorheriger Artikel Correction to: A systematic review of the effects of deposition parameters on the properties of Inconel thin films

Nächster Artikel Water jet incremental sheet metal forming: a critical state-of-the-art review and a proposal for technological windows

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Zhang P, Shi H, Tian Y, Yu Z, Wu D (2021) Effect of zinc on the fracture behavior of galvanized steel/6061 aluminum alloy by laser brazing. Weld World 65:13–22. https://doi.org/10.1007/s40194-020-00992-2CrossRef

Liu FC, Dong P (2021) From thick intermetallic to nanoscale amorphous phase at Al-Fe joint interface: roles of friction stir welding conditions. Scripta Mater 191:167–172. https://doi.org/10.1016/j.scriptamat.2020.09.031CrossRef

Silvayeh Z, Domitner J, Sommitsch C, Hartmann M, Karner W, Götzinger B (2020) Mechanical properties and fracture modes of thin butt-joined aluminum-steel blanks for automotive applications. J Manuf Process 59:456–467. https://doi.org/10.1016/j.jmapro.2020.09.050CrossRef

Nishino S (2020) Joining mechanism on resistance spot-welding between aluminum alloy and steel and evaluation of joining strength

Livieri P, Tovo R (2021) Fatigue strength of aluminium welded joints by a non-local approach. Int J Fatigue 143:106000. https://doi.org/10.1016/j.ijfatigue.2020.106000CrossRef

Dinda SK, Srirangam P, Roy GG (2020) Defects comparison between single- and double-sided electron beam welded dissimilar DP600 Steel to 5754 Al alloy joints: X-ray tomography study, San Diego, CA, United states, 2020[C]. Springer Sci Busin Media Deutschland GmbH

Wallerstein D, Lusquiños F, Comesaña R, Del Val J, Riveiro A, Badaoui A, Pou J (2021) Dissimilar unbeveled butt joints of AA6061 to S235 structural steel by means of standard single beam fiber laser welding-brazing. J Mater Process Technol 291:116994. https://doi.org/10.1016/j.jmatprotec.2020.116994CrossRef

Liu X, Lan S, Ni J (2014) Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel. Mater Des 59:50–62. https://doi.org/10.1016/j.matdes.2014.02.003CrossRef

Fang Y, Jiang X, Mo D, Zhu D, Luo Z (2019) A review on dissimilar metals’ welding methods and mechanisms with interlayer. Int J Adv Manufact Technol 102:2845–2863. https://doi.org/10.1007/s00170-019-03353-6CrossRef

10.

Takata N, Nishimoto M, Kobayashi S, Takeyama M (2014) Morphology and formation of Fe-Al intermetallic layers on iron hot-dipped in Al-Mg-Si alloy melt. Intermetallics 54:136–142. https://doi.org/10.1016/j.intermet.2014.06.003CrossRef

11.

Pp A, Gsb C, Db C, Ds A, Gf C (2007) Generation of aluminium–steel joints with laser-induced reactive wetting. Mater Sci Eng A 444:327–338. https://doi.org/10.1016/j.msea.2006.09.111CrossRef

12.

Yang X (2014) Effect of powder components on quality of laser welding aluminum to steel with filler powder. Master Changchun Uni Sci Technol Mechan Manufact Auto

13.

Yan LI, Ning L, Jiankang H, Ding F (2018) Structure and property of aluminum-steel dissimilar metal joint by laser fusion brazing with addition of different alloy powders. Mater Mechan Eng 42:30–35, 41. https://doi.org/10.11973/jxgccl201806006

14.

Dianwu Z, Jinshui L, Yuanzhi L, Laiqin Z, Jingchun P (2018) Microstructure and mechanical properties of deep penetration laser welding joints in steel/aluminum with Si powder addition. J Mechan Eng 54:58–65. https://doi.org/10.3901/JME.2018.14.058CrossRef

15.

Yuan-zhi L, Jin-shui L, Dian-wu Z, Zhe T, Xiao J, Lin-xi HU (2016) Laser lap welding joints in dual phase steel/aluminum alloy with Mn powder addition[Z]. 26:1632–1640

16.

Li T, Zhou D, Yan Y, Zhang S, Liu J (2020) Effect of Ti foil on microstructure and mechanical properties of laser fusion welding of DP590 dual-phase steel to 6022 aluminum alloy. Mater Sci Eng A 796:139929. https://doi.org/10.1016/j.msea.2020.139929CrossRef

17.

Chen S, Huang J, Ma K, Zhao X, Vivek A (2014) Microstructures and mechanical properties of laser penetration welding joint with/without Ni-foil in an overlap steel-on-aluminum configuration. Metall Mater Trans A 45:3064–3073. https://doi.org/10.1007/s11661-014-2241-1CrossRef

18.

Geng Y, Akbari M, Karimipour A, Karimi A, Soleimani A, Afraned M (2019) Effects of the laser parameters on the mechanical properties and microstructure of weld joint in dissimilar pulsed laser welding of AISI 304 and AISI 420. Infra Phys Technol 103. https://doi.org/10.1016/j.infrared.2019.103081

19.

Sharifi M, Akbari M (2019) Experimental investigation of the effect of process parameters on cutting region temperature and cutting edge quality in laser cutting of AL6061T6 alloy. Optik 184:457–463. https://doi.org/10.1016/j.ijleo.2019.04.105CrossRef

20.

Das T, Paul J (2020) Resistance spot welding of similar and dissimilar metals: the effect of graphene interlayer. JOM 72:2863–2874. https://doi.org/10.1007/s11837-020-04159-8CrossRef

21.

Das T, Das R, Paul J (2020) Resistance spot welding of dissimilar AISI-1008 steel/Al-1100 alloy lap joints with a graphene interlayer. J Manuf Process 53:260–274. https://doi.org/10.1016/j.jmapro.2020.02.032CrossRef

22.

LI Y (2015) Effect of different processing methods on the surface of steel on quality of laser welding aluminum to steel with filler power. Master Changchun Uni Sci Technol Mechan Manufact Auto. http://www.wanfangdata.com.cn/details/detail.do?_type=degree&id=D743966

23.

Chen X (2019) A study on microstructure and properties of steel/aluminum laser deep penetration welded joint. Master Soochow Uni. http://kns.cnki.net/KCMS/detail/detail.aspx?FileName=1019262514.nh&DbName=CMFD2020

24.

Zhou D, Tian W, Peng L, Zhang Y, Chen G (2014) Laser lap welding of steel and aluminum alloy with Cu, Pb metal sandwich addition. Rare Met Mater Eng. 43:1181–1186

25.

Yuan J, Zhou D, Chen S, Sun J, Hou D (2017) Interfacial microstructure and properties of steel/aluminum powder additive. J Mater Eng. 45:123–128

26.

Lu Y (2016) Study on the behavior and mechanism in DP steel/aluminum alloy laser welding with powder addition[Z]. Hunan Uni Master

27.

Zhang L, Zhou D, Liu J, Xu S, Qiao X, Li S (2013) Laser welding of steel/aluminum dissimilar metal with powder addition. Chin J Nonferr Met 23:3401–3409. https://doi.org/10.19476/j.ysxb.1004.0609.2013.12.020CrossRef

28.

Jian-kang H, Zi-yi W, Ning L, Shu-rong YU, Ding F (2018) Effect of metal coating on microstructure and properties of aluminum/steel laser welding-brazing joint. J Mater Eng 46:99–105. https://doi.org/10.11868/j.issn.1001-4381.2016.001568CrossRef

29.

Gang W, Xuelong C, Caiwang T, Junjun J, Chang X (2020) Effect of Ni/Si foil interlayer on microstructure and mechanical properties of laser welded aluminum/steel joints. Transact China Weld Insti 41:84–89. https://doi.org/10.12073/j.hjxb.20191022001CrossRef

30.

Liu D, Wang J, Xu M, Jiao H, Tang Y, Li D, Zhao L et al (2020) Evaluation of dissimilar metal joining of aluminum alloy to stainless steel using the filler metals with a high-entropy design. J Manuf Process 58:500–509. https://doi.org/10.1016/j.jmapro.2020.08.031CrossRef

31.

Jianling S, Sanbao Y, Chunli Y, Guangchao M (2008) Research on alloy agent for improving welded joint properties of aluminum to steel dissimilar material. Aeronaut Manufact Technol 12:26. https://doi.org/10.16080/j.issn1671-833x.2008.12.006CrossRef

32.

Jie W, Songbai X, Wenpan F, Yilong H, Peng Z (2019) Present status and development trend for brazing aluminum to steel [J]. 33(21):3533–3540

33.

Windmann M, Roettger A, Kuegler H, Theisen W, Vollertsen F (2015) Laser beam welding of aluminum to Al-base coated high-strength steel 22MnB5. J Mater Process Technol 217:88–95. https://doi.org/10.1016/j.jmatprotec.2014.10.026CrossRef

34.

Hd A, Wh A, Yd A, Xw A, Cd B (2012) Dissimilar metal joining of aluminum alloy to galvanized steel with Al–Si, Al–Cu, Al–Si–Cu and Zn–Al filler wires. J Mater Process Technol 212:458–464. https://doi.org/10.1016/j.jmatprotec.2011.10.009CrossRef

35.

Xia H, Li L, Ma N, Tan C, Gong J (2020) Influence of energy ratio on dual-spot laser welded-brazed Al/steel butt joint. J Mater Process Technol 281. https://doi.org/10.1016/j.jmatprotec.2020.116624

36.

Jianxun Z, Xu J, Zhenzhen XU, Guifeng Z (2020) Study on characteristics of laser welding-brazing of 6061 aluminum alloy to SPCC cold rolled steel. J Mechan Eng 56:41–49. https://doi.org/10.3901/JME.2020.06.041CrossRef

37.

Xue J, Li Y, Chen H, Zhu Z (2018) Effects of heat input on wettability, interface microstructure and properties of Al/steel butt joint in laser-metal inert-gas hybrid welding-brazing. J Mater Process Technol 255:47–54. https://doi.org/10.1016/j.jmatprotec.2017.11.063CrossRef

38.

Gao W, Yan Q, Huang J (2014) Microstructure and mechanical property of laser wire fusion brazing welded butt joints of steel/aluminum dissimilar metal[Z]. 85–90. https://doi.org/10.1016/j.jmatprotec.2019.116467

39.

Laukant H, Wallmann C, Muller M, Korte M, Stirn B, Haldenwanger HG, Glatzel U (2005) Fluxless laser beam joining of aluminium with zinc coated steel. Sci Technol Weld Join 10:219–226. https://doi.org/10.1179/174329305X37051CrossRef

40.

Huang R, Tan C, Sun Y, Gong X, Wu L, Chen B, Zhao H et al (2021) Influence of processing window on laser welding-brazing of Al to press-hardened 22MnB5 steel. Opt Laser Technol 133:106566. https://doi.org/10.1016/j.optlastec.2020.106566CrossRef

41.

Su J, Yang J, Li Y, Yu Z, Chen J, Zhao W, Liu H et al (2020) Microstructure and mechanical properties of laser fusion welded Al/steel joints using a Zn-based filler wire. Opt Laser Technol 122:105882. https://doi.org/10.1016/j.optlastec.2019.105882CrossRef

42.

Fengyu D, Caiwang T, Shenghao M, Guoxin LI, Hongyun Z, Jicai F (2017) Laser welding-brazing characteristics of dual-phase steel DP590/Al alloy 6061. Elect Weld Mach 47:12–17. https://doi.org/10.7512/j.issn.1001-2303.2017.09.03CrossRef

43.

Yu G, Chen S, Zou T, Li S, Huang J, Yang J, Zhao Z et al (2020) Laser beam joining of Al/steel dissimilar metals with Sn-Zn filler wire in overlap configuration. J Manuf Process 60:481–493. https://doi.org/10.1016/j.jmapro.2020.10.079CrossRef

Titel: Research progress of transition layer and filler wire for laser welding of steel and aluminum dissimilar metals
verfasst von: Yaowu Zhao
Yuhong Long
Zhaoyan Li
Publikationsdatum: 11.01.2022
Verlag: Springer London
Erschienen in: The International Journal of Advanced Manufacturing Technology / Ausgabe 7-8/2022
Print ISSN: 0268-3768
Elektronische ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-08442-z

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2022

Experimental and analytical study on adiabatic shear localized fracture characteristics in high-speed machining of pure titanium alloy

Research on the digital twin for thermal characteristics of motorized spindle

Orthogonal cutting of Wire and Arc Additive Manufactured parts

Effect of ultrasonic power on the microstructure and mechanical properties of TC4 alloy ultrasonically brazed joint using Zn filler

Modelling orthogonal cutting of Ti-6Al-4 V titanium alloy using a constitutive model considering the state of stress

Bottom surface smoothing of high aspect ratio hole by guiding large-area electron beam with magnet

Premium Partner

Marktübersichten