Role of Internal Stresses on the Incubation Times during Stress Corrosion Cracking

We have examined the incubation times in two alloys, 7075-T651 aluminum alloy and 4140 steel, as a function of applied K, using the published data in aqueous environment. The role of overloads was compared with the results from those without overloads, for a given environment. Effect of environment (NaCl vs deionized water) was also examined. The results show that in a constant K test, the incubation time increases with decreasing K. When a single overload cycle was applied, the time increased with percent overload for a constant background K, indicating that overload cycle affected the crack tip driving forces. These effects varied with the environment. The changes in the incubation times are analyzed considering one-to-one correspondence between the crack tip driving force and the times. Overloads contributed to compressive residual or internal stresses, thereby affecting the crack tip driving force. The stresses are related to changes in the plastic zone (PZ) sizes formed before and after the overloads. The effective stress intensity due to internal stress, K _int, is defined and is shown to be a function of PZ size. Similarly, condition for crack initiation is expressed as K _total = K _app ± K _int ≥ K _Iscc. A detailed methodology for the determination of K _int is outlined.