nach oben

Cellulose

Erschienen in:

01.12.2022 | Original Research

Roll stamped Ni/MWCNT composites for highly reliable cellulose paper-based strain sensor

verfasst von: Xue Qi, Paolo Matteini, Byungil Hwang, Sooman Lim

Erschienen in: Cellulose | Ausgabe 3/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Printing technology for electronic devices has garnered considerable attention owing to its rapid and massive productivity under ambient conditions. In this study, a facile approach is proposed for manufacturing cellulose paper-based strain sensors with Ni/multi-walled carbon nanotube (MWCNT) composites using roll stamping technology. This process enables the fabrication of stable sensing structures owing to the formation of stable Ni core-enveloping structures in the MWCNT interlacing network. In particular, the rheological properties of the composites revealed shear thinning and thixotropic behavior, which resulted in fine printing of the sensing electrodes. Furthermore, the shape of the printed patterns, imparted by the pattern morphology, significantly influenced the strain-sensing performance. In particular, the Ni/MWCNT composite-based strain sensor exhibited a higher gauge factor of 13.9, with a high sensing recovery of 90.4% and stability over 23,500 bending cycles.

Vorheriger Artikel Preparation and properties of T1–T2 multi-modality magnetic submicron particles with the spatial-gap template of cellulose nanocrystal dispersion

Nächster Artikel Oil structuring properties of electrospun Kraft lignin/cellulose acetate nanofibers for lubricating applications: influence of lignin source and lignin/cellulose acetate ratio

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Nur mit Berechtigung zugänglich

Bolton W (2021) Chapter 2: instrumentation system elements. In: Bolton WBT (ed) Instrumentation and control systems, 1st edn. Newnes, London, pp 17–70CrossRef

Bu Y, Shen T, Yang W, Yang S, Zhao Y, Liu H, Zheng Y, Liu C, Shen C (2021) Ultrasensitive strain sensor based on superhydrophobic microcracked conductive Ti₃C₂T_x MXene/paper for human-motion monitoring and E-skin. Sci Bull 66:1849–1857. https://doi.org/10.1016/j.scib.2021.04.041CrossRef

Capelson M, Hetzer MW (2009) Development and disease. Mol Biol 15:1–9. https://doi.org/10.1038/embor.2009.147CrossRef

Desai AV, Haque MA (2007) Mechanical properties of ZnO nanowires. Sens Actuators A Phys 134:169–176. https://doi.org/10.1016/j.sna.2006.04.046CrossRef

Duan Z, Jiang Y, Huang Q, Zhao Q, Yuan Z, Zhang Y, Wang S, Liu B, Tai H (2021) Integrated cross-section interface engineering and surface encapsulating strategy: a high-response, waterproof, and low-cost paper-based bending strain sensor. J Mater Chem C 9:14003–14011. https://doi.org/10.1039/d1tc03031kCrossRef

Falk N, Lösl M, Schröder N, Gießl A (2015) Specialized cilia in mammalian sensory systems. Cells 4:500–519. https://doi.org/10.3390/cells4030500CrossRefPubMedPubMedCentral

Freitas FS, Gonçalves AS, De Morais A, Benedetti JE, Nogueira AF (2012) Graphene-like MoS₂ as a low-cost counter electrode material for dye-sensitized solar cells. J Energy Sustain. https://doi.org/10.1039/c0xx00000xCrossRef

Girirajan S, Campbell C, Eichler E (2011) 乳鼠心肌提取 HHS public access. Physiol Behav 176:139–148. https://doi.org/10.1111/febs.14068.IntraflagellarCrossRef

Gong S, Lai DTH, Su B, Si KJ, Ma Z, Yap LW, Guo P, Cheng W (2015) Highly stretchy black gold E-Skin nanopatches as highly sensitive wearable biomedical sensors. Adv Electron Mater 1:1–7. https://doi.org/10.1002/aelm.201400063CrossRef

Hwang B, Han Y, Matteini P (2022) Bending fatigue behavior of Ag nanowire/Cu thin-film hybrid interconnects for wearable electronics. Facta Univ Ser Mech Eng. https://doi.org/10.22190/FUME220730040HCrossRef

Jenkins K, Yang R (2017) Mechanical transfer of ZnO nanowires for a flexible and conformal piezotronic strain sensor. Semicond Sci Technol 32:74004–74004CrossRef

Jiang D, Wang Y, Li B, Sun C, Wu Z, Yan H, Xing L, Qi S, Li Y, Liu H, Xie W, Wang X, Ding T, Guo Z (2019) Flexible sandwich structural strain sensor based on silver nanowires decorated with self-healing substrate. Macromol Mater Eng 304:1–9. https://doi.org/10.1002/mame.201900074CrossRef

Kamkar M, Nourin Sultana SM, Patangrao Pawar S, Eshraghian A, Erfanian E, Sundararaj U (2020) The key role of processing in tuning nonlinear viscoelastic properties and microwave absorption in CNT-based polymer nanocomposites. Mater Today Commun 24:101010–101010. https://doi.org/10.1016/j.mtcomm.2020.101010CrossRef

Lan S, Lee H, Ni J, Lee S, Lee M (2008) Survey on roller-type nanoimprint lithography (RNIL) process. Paper presented at the 2008 international conference on smart manufacturing application

Lan S, Song JH, Lee MG, Ni J, Lee NK, Lee HJ (2010) Continuous roll-to-flat thermal imprinting process for large-area micro-pattern replication on polymer substrate. Microelectron Eng 87:2596–2601. https://doi.org/10.1016/j.mee.2010.07.021CrossRef

Lee DJ, Kim DY (2019) Paper-based, hand-painted strain sensor based on ITO nanoparticle channels for human motion monitoring. IEEE Access 7:77200–77207. https://doi.org/10.1109/ACCESS.2019.2920920CrossRef

Li Y, Gan G, Huang Y, Yu X, Cheng J, Liu C (2019) Ag-NPs/MWCNT composite-modified silver-epoxy paste with improved thermal conductivity. RSC Adv 9:20663–20669. https://doi.org/10.1039/c9ra03090eCrossRefPubMedPubMedCentral

Liao X, Zhang Z, Liao Q, Liang Q, Ou Y, Xu M, Li M, Zhang G, Zhang Y (2016) Flexible and printable paper-based strain sensors for wearable and large-area green electronics. Nanoscale 8:13025–13032. https://doi.org/10.1039/c6nr02172gCrossRefPubMed

Liu L, Ye X, Wu K, Han R, Zhou Z, Cui T (2009) Humidity sensitivity of multi-walled carbon nanotube networks deposited by dielectrophoresis. Sensors 9:1714–1721CrossRefPubMedPubMedCentral

Liu H, Jiang H, Du F, Zhang D, Li Z, Zhou H (2017a) Flexible and degradable paper-based strain sensor with low cost. ACS Sustain Chem Eng 5:10538–10543. https://doi.org/10.1021/acssuschemeng.7b02540CrossRef

Liu H, Qing H, Li Z, Han YL, Lin M, Yang H, Li A, Lu TJ, Li F, Xu F (2017b) Paper: a promising material for human-friendly functional wearable electronics. Mater Sci Eng R 112:1–22. https://doi.org/10.1016/j.mser.2017.01.001CrossRef

Liu L, Jiao Z, Zhang J, Wang Y, Zhang C, Meng X, Jiang X, Niu S, Han Z, Ren L (2021) Bioinspired, superhydrophobic, and paper-based strain sensors for wearable and underwater applications. ACS Appl Mater Interfaces 13:1967–1978. https://doi.org/10.1021/acsami.0c18818CrossRefPubMed

Mandal P, Mondal SC (2018) Investigation of electro-thermal property for Cu-MWCNT composite coating on anodized 6061 aluminium alloy. Appl Surf Sci 454:138–147. https://doi.org/10.1016/j.apsusc.2018.05.130CrossRef

Mayappan R, Hassan AA, Ab Ghani NA, Yahya I, Andas J (2016) Improvement in intermetallic thickness and joint strength in carbon nanotube composite Sn–3.5Ag lead-free solder. Mater Today Proc 3:1338–1344. https://doi.org/10.1016/j.matpr.2016.04.012CrossRef

Mehmood A, Mubarak NM, Khalid M, Walvekar R, Abdullah EC, Siddiqui MTH, Baloch HA, Nizamuddin S, Mazari S (2020) Graphene based nanomaterials for strain sensor application: a review. J Environ Chem Eng 8:103743–103743. https://doi.org/10.1016/j.jece.2020.103743CrossRef

Najafabadi AH, Tamayol A, Annabi N, Ochoa M, Mostafalu P, Akbari M, Nikkhah M, Rahimi R, Dokmeci MR, Sonkusale S, Ziaie B, Khademhosseini A (2014) Biodegradable nanofibrous polymeric substrates for generating elastic and flexible electronics. Adv Mater 26:5823–5830. https://doi.org/10.1002/adma.201401537CrossRefPubMedPubMedCentral

Qi X, Lim S (2022) A screen-printed metal hybrid composite for wireless wind sensing. Nanomaterials 12:972CrossRefPubMedPubMedCentral

Qi X, Ha H, Hwang B, Lim S (2020a) Printability of the screen-printed strain sensor with carbon black/silver paste for sensitive wearable electronics. Appl Sci 10:1–10. https://doi.org/10.3390/app10196983CrossRef

Qi X, Li X, Jo H, Sideeq Bhat K, Kim S, An J, Kang JW, Lim S (2020b) Mulberry paper-based graphene strain sensor for wearable electronics with high mechanical strength. Sens Actuators A Phys 301:111697–111697. https://doi.org/10.1016/j.sna.2019.111697CrossRef

Qian Q, Wang Y, Zhang M, Chen L, Feng J, Wang Y, Zhou Y (2019) Ultrasensitive paper-based polyaniline/graphene composite strain sensor for sign language expression. Compos Sci Tech 181:107660–107660. https://doi.org/10.1016/j.compscitech.2019.05.017CrossRef

Reinhardt K, Hofmann N, Eberstein M (2018) The importance of shear thinning, thixotropic and viscoelastic properties of thick film pastes to predict effects on printing performance. In: EMPC 2017: 21st European microelectronics and packaging conference & exhibition 2018-Jan, pp 1–7. https://doi.org/10.23919/EMPC.2017.8346831

Sezer HK, Eren O (2019) FDM 3D printing of MWCNT re-inforced ABS nano-composite parts with enhanced mechanical and electrical properties. J Manuf Process 37:339–347. https://doi.org/10.1016/j.jmapro.2018.12.004CrossRef

Song P, Song J, Zhang Y (2020) Stretchable conductor based on carbon nanotube/carbon black silicone rubber nanocomposites with highly mechanical, electrical properties and strain sensitivity. Compos Part B Eng 191:107979–107979. https://doi.org/10.1016/j.compositesb.2020.107979CrossRef

Spitalsky Z, Tasis D, Papagelis K, Galiotis C (2010) Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties. Prog Polym Sci 35:357–401. https://doi.org/10.1016/j.progpolymsci.2009.09.003CrossRef

Tortorich RP, Shamkhalichenar H, Choi J-W (2018) Inkjet-printed and paper-based electrochemical sensors. Appl Sci 8:288CrossRef

Wei Y, Chen S, Li F, Lin Y, Zhang Y, Liu L (2015) Highly stable and sensitive paper-based bending sensor using silver nanowires/layered double hydroxides hybrids. ACS Appl Mater Interfaces 7:14182–14191. https://doi.org/10.1021/acsami.5b03824CrossRefPubMed

Xia K, Chen X, Shen X, Li S, Yin Z, Zhang M, Liang X, Zhang Y (2019) Carbonized Chinese art paper-based high-performance wearable strain sensor for human activity monitoring. ACS Appl Electron Mater 1:2415–2421. https://doi.org/10.1021/acsaelm.9b00564CrossRef

Yang L, Liu H, Zhang Y, Yu H (2017) Study on the reliability of carbon nanotube-reinforced Sn–58Bi lead-free solder joints. J Mater Eng Perform 26:6028–6036. https://doi.org/10.1007/s11665-017-3033-8CrossRef

Yim YJ, Rhee KY, Park SJ (2016) Electromagnetic interference shielding effectiveness of nickel-plated MWCNTs/high-density polyethylene composites. Compos Part B Eng 98:120–125. https://doi.org/10.1016/j.compositesb.2016.04.061CrossRef

Yun TG, Kim D, Kim SM, Kim ID, Hyun S, Han SM (2018) Mulberry paper-based supercapacitor exhibiting high mechanical and chemical toughness for large-scale energy storage applications. Adv Energy Mater 8:1–9. https://doi.org/10.1002/aenm.201800064CrossRef

Zhao J, Guang-Yu Z, Shi D-X (2013) Review of graphene-based strain sensors. Chin Phys B 22:57701–57701. https://doi.org/10.1088/1674-1056/22/5/057701CrossRef

Titel: Roll stamped Ni/MWCNT composites for highly reliable cellulose paper-based strain sensor
verfasst von: Xue Qi
Paolo Matteini
Byungil Hwang
Sooman Lim
Publikationsdatum: 01.12.2022
Verlag: Springer Netherlands
Erschienen in: Cellulose / Ausgabe 3/2023
Print ISSN: 0969-0239
Elektronische ISSN: 1572-882X
DOI: https://doi.org/10.1007/s10570-022-04970-3

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Technik"

Springer Professional "Wirtschaft+Technik"

Weitere Artikel der Ausgabe 3/2023

Polysaccharide-based films reinforced with nanocellulose isolated from raw and bleached cotton

Microstructure, chemical composition and thermal stability of alkali-treated bamboo fibers and parenchyma cells: effects of treatment time and temperature

Impact of degree of substitution of quaternary cellulose on the adsorption on charged surfaces and associated thermodynamics

Highly efficient and antibacterial uranium adsorbents derived from disubstituted amidoxime functionalized chitosan

Oil structuring properties of electrospun Kraft lignin/cellulose acetate nanofibers for lubricating applications: influence of lignin source and lignin/cellulose acetate ratio

Increasing 3D elongation potential in fixed blank forming via fiber curlation