nach oben

Arabian Journal for Science and Engineering

Erschienen in:

07.03.2023 | Research Article-Petroleum Engineering

Simulation and Experimental Study on Rock-Breaking Mechanism of the Reverse Rotary Torque Self-balancing Dual Drill Bit

verfasst von: Cong Zhang, Ke Gao, Yan Zhao, Xiaobo Xie, Congshan Zhang, Xiaoshu Lv

Erschienen in: Arabian Journal for Science and Engineering | Ausgabe 12/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The stick–slip vibration of a drill bit in oil and gas drilling causes significant disturbances to the formation, severely impacting the drilling quality. The dual drill bit (DB) torque self-balancing drilling technology has superior drill bit stability, obtained by balancing the torques of the inner and outer bits (IB and OB). However, research on the DB working process is still in the initial stages. To analyze the vibration reduction in the DB from the perspective of the rock-breaking mechanism, this study established a dynamic rock-breaking finite element model of the DB through theoretical calculations and conducted a numerical simulation comparison and drilling experiment comparison of the rock-breaking process between the DB and conventional drill bit (CB). The differences in the reactive torque between the DB and CB were compared. Subsequently, the drilling process was simulated using the two drilling methods, including the rock-breaking process, core and wellbore disturbance, and bit motion. The results indicate that DB drilling can reduce the torque vibration of the rock on the drill bit by 69.7%, thus decreasing the damage to the formation. In addition, DB can form a shear-breaking effect on the rock at the junction of IB and OB, which improves the rock-breaking efficiency by 13.8%. The results of this work will help reveal the low stick–slip vibration mechanism of the DB self-balancing drilling technique, which can provide new ideas for the study of drilling stability.

Vorheriger Artikel New Control Method of Casing Deformation in Shale Gas Slip Fault Based on Solid Expandable Tubular

Nächster Artikel Analysis of Rock-Breaking Mechanism and Drillstring Dynamics of an Innovative Multi-Ridge-Curve-Shaped PDC Cutter

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Howarth, D.F.; Rowlands, J.C.: Quantitative assessment of rock texture and correlation with drillability and strength properties. Rock Mech. Rock Eng. 20, 57–85 (1987)CrossRef

Liu, W.; Zhou, Y.C.: Prospective study on managed pressure drilling technology of an ultra-deep complex well. Acta Geol. Sin. Engl. Ed. 93, 334–334 (2019). https://doi.org/10.1111/1755-6724.14121CrossRef

Dong, G.J.; Chen, P.: A review of the evaluation, control, and application technologies for drill string vibrations and shocks in oil and gas well. Shock Vib. 2016, 1–34 (2016). https://doi.org/10.1155/2016/7418635CrossRef

Zhu, X.; Liu, W.: The effects of drill string impacts on wellbore stability. J. Petrol Sci. Eng. 109, 217–229 (2013). https://doi.org/10.1016/j.petrol.2013.08.004CrossRef

Huang, K.L.; Yang, Y.X.; Liu, Y.; Niu, Q.Z.: Vibration failure and anti-vibration analysis of an annular-grooved PDC bit. Eng. Fail Anal. 115, 104658 (2020). https://doi.org/10.1016/j.engfailanal.2020.104658CrossRef

Wang, W.; Peng, J.M.; Wang, H.Y.; Chen, C.; Wang, X.L.; Fu, W.G.: FEM simulation analysis of sampling disturbance with PCS drill bit in gas-hydrate-bearing stratum. J. Cent. South Univ. 45(4), 1183–1189 (2014)

Zhu, H.Y.; Deng, J.G.; Xie, Y.H.; Huang, K.W.; Zhao, J.Y.; Yu, B.H.: Rock mechanics characteristic of complex formation and faster drilling techniques in Western South China Sea oilfields. Ocean Eng. 44, 33–45 (2012). https://doi.org/10.1016/j.oceaneng.2012.01.031CrossRef

Ledgerwood, L.W.; Spencer, R.W.; Matthews, O.; Bomidi, J.A.; Mendoza, J.A.; Hanson, J.M.: The effect of bit type on reactive torque and consequent tool-face-control anomalies. SPE Drill. Complet. 31, 095–105 (2016). https://doi.org/10.2118/174949-PACrossRef

Liu, Y.S.; Gao, D.L.: A nonlinear dynamic model for characterizing downhole motions of drill-string in a deviated well. J. Nat Gas Sci. Eng. 38, 466–474 (2017). https://doi.org/10.1016/j.jngse.2017.01.006CrossRef

10.

Ozaki, S.; Hashiguchi, K.: Numerical analysis of stick-slip instability by a rate-dependent elastoplastic formulation for friction. Tribol. Int. 43, 2120–2133 (2010). https://doi.org/10.1016/j.triboint.2010.06.007CrossRef

11.

Zhu, X.H.; Tang, L.P.; Yang, Q.M.: A literature review of approaches for stick-slip vibration suppression in oilwell drillstring. Adv. Mech. Eng. 6, 967952 (2014). https://doi.org/10.1155/2014/967952CrossRef

12.

Kyllingstad, A.; Halsey, G.W.: A study of slip/stick motion of the bit. SPE Drill. Eng. 3(4), 369–373 (1988)CrossRef

13.

Besselink, B.; van de Wouw, N.; Nijmeijer, H.: A semi-analytical study of stick-slip oscillations in drilling systems. J. Comput. Nonlinear Dyn. 6, 021006 (2011). https://doi.org/10.1115/1.4002386CrossRef

14.

Liu, X.B.; Vlajic, N.; Long, X.H.; Meng, G.; Balachandran, B.: Nonlinear motions of a flexible rotor with a drill bit: stick-slip and delay effects. Nonlinear Dyn. 72, 61–77 (2013). https://doi.org/10.1007/s11071-012-0690-xMathSciNetCrossRef

15.

Zhu, X.H.; Tang, L.P.; Tong, H.: Effects of high-frequency torsional impacts on rock drilling. Rock Mech. Rock Eng. 47, 1345–1354 (2014). https://doi.org/10.1007/s00603-013-0461-0CrossRef

16.

Tian, K.; Detournay, E.: Influence of PDC bit cutter layout on stick–slip vibrations of deep drilling systems. J. Petrol Sci. Eng. 206, 109005 (2021). https://doi.org/10.1016/j.petrol.2021.109005CrossRef

17.

Gao, K.; Zhang, C.; Zhao, Y., et al.: Theory and experiment of the dual-bit torque self-balancing drilling system for rescue drilling. Coal Geol. Explor. 50(11), 85–93 (2022). https://doi.org/10.12363/issn.1001-1986.22.06.0444CrossRef

18.

Gao, K.; Sun, Y.H.; Wang, Z.G.; Zhao, Y.; Bo, K.; Xie, X.B.; Wang, H.Y.; Wang, X.C.; Liu, Z.; Wang, Y.F.; Chen, H.K.; Peng, S.Y.; Xu, Y.C.; Xing, L.D.: Downhole drilling tool system of torque self-balancing. American, Patent, No. US2020/10724300 B2. 02/16/2018

19.

Gao, K.; Chen, H.K.; Xu, X.H.; Gao, H.T.; Xie, X.B.; Yan, L.P.: Rock fragmentation characteristics of double impregnated diamond bits with self-balancing reverse rotation. J. Jilin Univ. (Eng. Technol. Ed.) 51(3), 866–874 (2021)

20.

Zheng, M.Z.; Li, S.J.; Yao, Z.; Zhang, A.D.; Xu, D.P.; Zhou, J.F.: Core discing characteristics and mitigation approach by a novel developed drill bit in deep rocks. J. Cent. South Univ. 27, 2822–2833 (2020). https://doi.org/10.1007/s11771-020-4512-xCrossRef

21.

Rojek, J.; Oñate, E.; Labra, C.; Kargl, H.: Discrete element simulation of rock cutting. Int. J. Rock Mech. Mining Sci. 48, 996–1010 (2011). https://doi.org/10.1016/j.ijrmms.2011.06.003CrossRef

22.

Jaime, M.C.; Zhou, Y.; Lin, J.-S.; Gamwo, I.K.: Finite element modeling of rock cutting and its fragmentation process. Int. J. Rock Mech. Mining Sci. 80, 137–146 (2015). https://doi.org/10.1016/j.ijrmms.2015.09.004CrossRef

23.

Yang, Y.X.; Song, D.D.; Ren, H.T.; Huang, K.L.; Zuo, L.: Study of a new impregnated diamond bit for drilling in complex, highly abrasive formation. J. Petrol Sci. Eng. 187, 106831 (2020). https://doi.org/10.1016/j.petrol.2019.106831CrossRef

24.

Franca, L.F.P.; Mostofi, M.; Richard, T.: Interface laws for impregnated diamond tools for a given state of wear. Int. J. Rock Mech. Mining Sci. 73, 184–193 (2015). https://doi.org/10.1016/j.ijrmms.2014.09.010CrossRef

25.

Ersoy, A.; Atıcı, U.: Performance characteristics of circular diamond saws in cutting different types of rocks. Diam. Relat. Mater. 13, 22–37 (2004). https://doi.org/10.1016/j.diamond.2003.08.016CrossRef

26.

Popov, V.L.: Contact mechanics and friction physical principles and applications. Springer, Heidelberg, Berlin (2010)MATH

27.

Lindqvist, P.-A.: Stress fields and subsurface crack propagation of single and multiple rock indentation and disc cutting. Rock Mech. Rock Eng. 17, 97–112 (1984)CrossRef

28.

Zhong, Z.: Finite procedures for contact-impact problems. Oxford University Press, Oxford (1993)CrossRef

29.

Liu, W.J.; Qian, X.D.; Li, T.; Zhou, Y.L.; Zhu, X.H.: Investigation of the tool-rock interaction using Drucker–Prager failure criterion. J. Petrol Sci. Eng. 173, 269–278 (2019). https://doi.org/10.1016/j.petrol.2018.09.064CrossRef

30.

Yang, D.H.: Preliminary research of rock breaking methods and impregnated diamond core bit in scientific ultra-deep drilling process. Dissertation, China University of Geosciences, Wuhan (2012)

31.

Teale, R.: The concept of specific energy in rock drilling. Int. J. Rock Mech. Mining Sci. 2(2), 57–73 (1965)CrossRef

32.

Chen, X.; Gao, D.; Guo, B.; Feng, Y.: Real-time optimization of drilling parameters based on mechanical specific energy for rotating drilling with positive displacement motor in the hard formation. J. Nat Gas Sci. Eng. 35, 686–694 (2016). https://doi.org/10.1016/j.jngse.2016.09.019CrossRef

Titel: Simulation and Experimental Study on Rock-Breaking Mechanism of the Reverse Rotary Torque Self-balancing Dual Drill Bit
verfasst von: Cong Zhang
Ke Gao
Yan Zhao
Xiaobo Xie
Congshan Zhang
Xiaoshu Lv
Publikationsdatum: 07.03.2023
Verlag: Springer Berlin Heidelberg
Erschienen in: Arabian Journal for Science and Engineering / Ausgabe 12/2023
Print ISSN: 2193-567X
Elektronische ISSN: 2191-4281
DOI: https://doi.org/10.1007/s13369-023-07699-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 12/2023

Development of Polyaniline/Polyvinylpyrrolidone (PANI/PVP) Composite Films for Piezoresistive Strain-Sensing Applications

Poly(4-Methyl-1-Pentene) (PMP) with Nano Fumed Silica as Filler for CO2/N2 Gas Separation

Predicting Rate of Penetration in Ultra-deep Wells Based on Deep Learning Method

Analysis of Rock-Breaking Mechanism and Drillstring Dynamics of an Innovative Multi-Ridge-Curve-Shaped PDC Cutter

A New Integrated Process for LNG Production Based on the Single Mixed Refrigerant: Energy, Exergy, Environmental and Economic Analysis

Synthesis, Characterization and Thermal Analysis of MWCNT-Transformer Oil-Based Nanofluid: An Experimental Study

Premium Partner

Marktübersichten