nach oben

International Journal on Interactive Design and Manufacturing (IJIDeM)

Erschienen in:

03.07.2023 | Original Paper

Simulation and validation of experimental residual stresses of dissimilar AA2124 and AA7075 TIG weld joint using ANSYS APDL

verfasst von: M. Jothi Hari Prasad, I. Sudhakar, S. Adinarayana, D. V. N. J. Jagannadha Rao

Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) | Ausgabe 1/2024

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Aluminum alloys such as AA2124 and AA7075 are widely used in aeroplane construction. Certain applications of aircraft manufacturing need dissimilar joint of the aforementioned aluminum alloys. The investigation involves predicting residual stresses in multiple directions (X, Y, and Z) along the transverse direction of welding in butt-welds using ANSYS APDL. Simulated stresses which are tensile along weld bead are well concurrent with the XRD experimental findings (Gas Turbine Research Establishment). During TIG welding of these plates different currents were used to form dissimilar joints and all of them form visible cracks along the weld bead. This formation of cracks is well accord with both simulated and experimental tensile residual stresses. The simulated stresses are compared to the numerical values i.e., experimental findings, and the discrepancy of less than 10% has been noticed. Thus, simulated model can be used as tool for prediction of cracks for joining dissimilar aluminum alloys of above said.

Vorheriger Artikel Thermodynamic modeling and performance analysis of newly conceptualized Double basin concentric tubular solar still

Nächster Artikel A cost estimation approach for aircraft design enhancement

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Zhang, W.Y., Jiang, W.C., Zhao, X., Tu, S.T.: Fatigue life of a dissimilar welded joint considering the weld residual stress: experimental and finite element simulation. Int J Fatigue 109, 182–190 (2018)CrossRef

Taban, E., Gould, J.E., Lippold, J.C.: Dissimilar friction welding of 6061–T6 aluminum and AISI 1018 steel: properties and micro structural characterization, (Materials & Design). Elsevier, Armsterdam (2010)

HuseyinUzun, C.D., Donne, A.A., TommasoGhidini, C.G.: Friction stir welding of dissimilar Al 6013–T4 To X5CrNi18-10 stainless steel. Mater. Des. 26, 41–46 (2005)CrossRef

Aliha, M.R.M., Gharehbaghi, H.: The effects of combined mechanical load/welding residual stress on mixed mode fracture parameters of a thin aluminum cracked cylinder. EngFractMech 180, 213–228 (2017)

Lu, Y., Zhu, S., Zhao, Z., Chen, T., Zeng, J.: Numerical simulation of residual stresses in aluminum alloy welded joints. J. Manuf. Process. 50, 380–393 (2020). https://doi.org/10.1016/j.jmapro.2019.12.056CrossRef

Zhao, L., Liang, J., Zhong, Q., Yang, C., Sun, B., Du, J.: Numerical simulation on the effect of welding parameters on welding residual stresses in T92/S30432 dissimilar welded pipe. Adv Eng Software 68, 70e9 (2014)CrossRef

Costa, S., Souza, M.S., Cesar, M.B., Goncalves, J., Ribeiro, J.E.: Experimental and numerical study to minimize the residual stresses in welding of 6082–T6 aluminum alloy. AIMS Mater Sci 8, 271e82 (2021)

Farhang, M., Sam-Daliri, O., Farahani, M., Vatani, A.: Effect of friction stir welding parameters on the residual stress distribution of Al-2024-T6 alloy. J Mech Eng Sci 15, 768494 (2021)CrossRef

Ji, S.D., Fang, H.Y., Liu, X.S., Meng, Q.G.: Influence of a welding sequence on the welding residual stress of a thick plate. Model Simulat Mater Sci Eng 13, 553e65 (2005)CrossRef

10.

Hammad, A., Churiaque, C., Sanchez-Amaya, J.M., Abdel- Nasser, Y.: Experimental and numerical investigation of hybrid laser arc welding process and the influence of welding sequence on the manufacture of stiffened flat panels. J Manuf Process 61, 527e38 (2021)CrossRef

11.

Trupiano, S., Belardi, V.G., Fanelli, P., Gaetani, L., Vivio, F.: A novel modeling approach for multi-passes butt-welded plates. J Therm Stresses 44, 1e21 (2021)CrossRef

12.

Okano, S., Tanaka, M., Mochizuki, M.: Arc physics-based heat source modelling for numerical simulation of weld residual stress and distortion. Sci Technol Weld Join 16, 209e14 (2011)CrossRef

13.

Liu, Z.H., Xiu, L., Wu, J.F., Lv, G., Ma, J.G.: Numerical simulation on residual stress eliminated by shot peening using SPH method. Fusion Eng Des 147, 111231 (2019)CrossRef

14.

Mo, T., Chen, J., Zhang, P., Bai, W., Mu, X., Wu, Y.: Numerical simulation of the effect of ultrasonic impact treatment on welding residual stress. Int J Mod Phys B 35, 2150175 (2021)CrossRef

15.

Cho, J.R., Lee, B.Y., Moon, Y.H., Van Tyne, C.J.: Investigation of residual stress and post weld heat treatment of multi-pass welds by finite element method and experiments. J Mater Process Technol 155e156, 1690e5 (2004)

16.

Yang, Y.-P.: Recent advances in the prediction of weld residual stress and distortion - Part 1. Weld J 100, 15170 (2021)

17.

Mochizuki, M., Hayashi, M., Hattori, T.: Numerical analysis of welding residual stress and its verification using neutron diffraction measurement. J Eng Mater Technol 122, 98–103 (2000). https://doi.org/10.1115/1.482772CrossRef

18.

Chujutalli, J., Lourenço, M.I., Estefen, S.: Methodology for the determination of heat source parameters for a FCAW process (2016)

19.

Eswara, V., Jaggannadha, Rao, D. V. N. J., Seetharama, Rao, Y.: Finite element simulation of residual stresses in welded steel butt joints and their experimental verification and mitigation. In IOP conference series: materials science and engineering (2020)

20.

Yelamasetti, B., Rajyalakshmi, G.: Thermal fields and residual stresses analysis in TIG weldments of SS 316 and Monel 400 by numerical simulation and experimentation. Mater Res Expr (2019). https://doi.org/10.1088/2053-1591/ab23cfCrossRef

21.

Wen, Z., Huanhuan, L., Qing, W.: Simulation of residual stress in aluminum alloy welding seam based on computer numerical simulation. Optik. 258, 168785 (2022). https://doi.org/10.1016/j.ijleo.2022.168785CrossRef

22.

Zhu, J., Chen, W., Xie, H.M.: Simulation of residual stresses and their effects on thermal barrier coating systems using finite element method. Sci. China Phys., Mech. Astron. 58, 1–10 (2014). https://doi.org/10.1007/s11433-014-5541-yCrossRef

23.

Esmaily, M., NooshinMortazavi, S., Todehfalah, P., Rashidi, M.: Microstructural characterization and formation of ά martensite phase in Ti–6Al–4V alloy butt joints produced by friction stir and gas tungsten arc welding processes. Mater Des 47, 143–150 (2013)CrossRef

24.

Goldak, J., Chakravarti, A., Bibby, M.: A new finite element model for welding heat sources. Metall Trans B 15(2), 299–305 (1984)CrossRef

25.

Biswas, P., Mahapatra, M.M., Mandal, N.R.: Numerical and experi-mental study on prediction of thermal history and residual defor-mation of double-sided fillet welding. J Eng Manuf Proc Inst Mech Eng 224(Part B), 125–134 (2009)

26.

Reda, R., Magdy, M., Rady, M.: Ti–6Al–4V TIG weld analysis using FEM simulation and experimental characterization. Iran. J. Sci. Technol., Trans. Mech. Eng. 44, 1–18 (2019). https://doi.org/10.1007/s40997-019-00287-yCrossRef

27.

Wen, Q., Li, W., Wang, W.B., Wang, F., Gao, Y.J., Patel, V.: Experimental and numerical investigations of bonding interface behavior in stationary shoulder friction stir lap welding. J Mater Sci Technol (2018). https://doi.org/10.1016/j.jmst.2018.09.028CrossRef

28.

He, M., Zhang, Z.-F., Mao, W., Li, B., Yuelong, B., Jun, X.: Numerical and experimental study on melt treatment for large-volume 7075 alloy by a modified annular electromagnetic stirring. Materials 12, 820 (2019). https://doi.org/10.3390/ma12050820CrossRef

29.

Ma, F., Fu, D., Liu, Y., Yang, D., Zhang, S., Sha, Z.: The Numerical Simulation of Temperature Field in Friction Stir Welding of 7075 Aluminium Alloy. IOP Conf. Series: Mater. Sci. Eng. 751, 012081 (2020). https://doi.org/10.1088/1757-899X/751/1/012081CrossRef

30.

Chujutalli, J., Lourenço, M.I., Estefen, S.: Methodology for the determination of heat source parameters for a FCAW process (2016)

Titel: Simulation and validation of experimental residual stresses of dissimilar AA2124 and AA7075 TIG weld joint using ANSYS APDL
verfasst von: M. Jothi Hari Prasad
I. Sudhakar
S. Adinarayana
D. V. N. J. Jagannadha Rao
Publikationsdatum: 03.07.2023
Verlag: Springer Paris
Erschienen in: International Journal on Interactive Design and Manufacturing (IJIDeM) / Ausgabe 1/2024
Print ISSN: 1955-2513
Elektronische ISSN: 1955-2505
DOI: https://doi.org/10.1007/s12008-023-01384-8

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Weitere Artikel der Ausgabe 1/2024

Effect of grey relational optimization of process parameters on surface and tribological characteristics of annealed AISI P20 tool steel machined using wire EDM

Intelligent flexible assembly system for labor-intensive factory using the configurable virtual workstation concept

Application of wavelet ratio between acoustic emission and cutting force signal decomposing in intelligent monitoring of cutting tool wear when turning SKD 61

Design model for assembly lines including fractional tasks and parallel workstations

Electric Vehicle Charge scheduling approach based on Smart Decision Hunting optimization

Estimation of error in four-bar mechanism under dimensional deviations

Premium Partner