nach oben

Journal of Materials Engineering and Performance

Erschienen in:

08.06.2016

Specimen Preparation for Metal Matrix Composites with a High Volume Fraction of Reinforcing Particles for EBSD Analysis

verfasst von: A. S. Smirnov, G. A. Belozerov, E. O. Smirnova, A. V. Konovalov, V. P. Shveikin, O. Yu. Muizemnek

Erschienen in: Journal of Materials Engineering and Performance | Ausgabe 7/2016

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

The paper deals with a procedure of preparing a specimen surface for the EBSD analysis of a metal matrix composite (MMC) with a high volume fraction of reinforcing particles. Unlike standard procedures of preparing a specimen surface for the EBSD analysis, the proposed procedure is iterative with consecutive application of mechanical and electrochemical polishing. This procedure significantly improves the results of an indexed MMC matrix in comparison with the standard procedure of specimen preparation. The procedure was verified on a MMC with pure aluminum (99.8% Al) as the matrix, SiC particles being used as reinforcing elements. The average size of the SiC particles is 14 μm, and their volume fraction amounts to 50% of the total volume of the composite. It has been experimentally found that, for making the EBSD analysis of a material matrix near reinforcing particles, the difference in height between the particles and the matrix should not exceed 2 µm.

Vorheriger Artikel Weathering and Biodegradation Study on Graft Copolymer Compatibilized Hybrid Bionanocomposites of Poly(Lactic Acid)

Nächster Artikel Residual Stress in Brazing of Submicron Al2O3 to WC-Co

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

A. J. Schwartz, M. Kumar, B. L. Adams, and D. P. Field (eds) Electron Backscatter Diffraction in Materials Science, Second Edition, Springer, 2009, p 1–403

W. Zhou and Z. Wang (eds) Scanning Microscopy for Nanotechnology. Techniques and Applications, Springer, 2007, p 1–552

D.J. Dingley and V. Randle, Microtexture Determination by Electron Back-Scatter Diffraction, J. Mater. Sci., 1992, 27(17), p 4545–4566CrossRef

X. Wang, Y. Xing, H. Huang, Y. Li, Z. Jia, and Q. Liu, Growth Directions of Precipitates in the Al-Si-Mg-Hf Alloy Using Combined EBSD and FIB 3D-Reconstruction Techniques, Microsc. Microanal., 2015, 21(3), p 588–593CrossRef

S. Dziaszyk, E.J. Payton, F. Friedel, V. Marx, and G. Eggeler, On the Characterization of Recrystallized Fraction Using Electron Backscatter Diffraction: A Direct Comparison to Local Hardness in an IF Steel Using Nanoindentation, Mater. Sci. Eng. A, 2010, 527(29–30), p 7854–7864CrossRef

A.S. Smirnov, A.V. Konovalov, and OYu Muizemnek, Modelling and Simulation of Strain Resistance of Alloys Taking into Account Barrier Effects, Diagn. Resour. Mech. Mater. Struct., 2015, 1, p 61–72

R. Basu, L. Jain, B. Maji, and M. Krishnan, Dynamic Recrystallization in a Ni-Ti-Fe Shape Memory Alloy: Effects on Austenite–Martensite Phase Transformation, J. Alloy. Compd., 2015, 639, p 94–101CrossRef

T. Zienert and O. Fabrichnaya, Phase Relations in the A356 Alloy: Experimental Study and Thermodynamic Calculations, Adv. Eng. Mater., 2013, 15(12), p 1244–1250CrossRef

H. Jafarian, J. Habibi-Livar, and S.H. Razavi, Microstructure Evolution and Mechanical Properties in Ultrafine Grained Al/TiC Composite Fabricated by Accumulative Roll Bonding, Compos. B Eng., 2015, 77, p 84–92CrossRef

10.

X. Jiang, M. Galano, and F. Audebert, Extrusion Textures in Al, 6061 Alloy and 6061/SiCp Nanocomposites, Mater. Charact., 2014, 88, p 111–118CrossRef

11.

S. Sankaranarayanan, R.K. Sabat, S. Jayalakshmi, S. Suwas, and M. Gupta, Effect of Hybridizing Micron-Sized Ti with Nano-sized SiC on the Microstructural Evolution and Mechanical Response of Mg-5.6Ti Composite, J. Alloy. Compd., 2013, 575, p 207–217CrossRef

12.

M.M. Wang, W.J. Lu, D. Zhang, J.N. Qin, T. Fan, B. Ji, F. Zhu, and S. Ji, An EBSD and TEM Study on the Microstructural Evolution of In Situ Synthesized (TiB + TiC)/Ti Matrix Composites During Superplastic Deformation, Mater. Trans., 2005, 46(8), p 1833–1838CrossRef

13.

M. Herrmann, R. Neher, K. Brandt, and S. Hoehn, Micro-segregations in Liquid Phase Sintered Silicon Carbide Ceramics, J. Eur. Ceram. Soc., 2010, 30(6), p 1495–1501CrossRef

14.

S. Simões, F. Viana, M.A.L. Reis, and M.F. Vieira, Influence of Dispersion/Mixture Time on Mechanical Properties of Al–CNTs Nanocomposites, Compos. Struct., 2015, 126, p 114–122CrossRef

15.

V. Ocelík, J.A. Vreeling, and J.T.M. De Hosson, EBSP Study of Reaction Zone in SiC/Al Metal Matrix Composite Prepared by Laser Melt Injection, Journal of Materials Science, 2001, 36(20), p 4845–4849CrossRef

16.

M. Alizadeh, M.H. Paydar, D. Terada, and N. Tsuji, Effect of SiC Particles on the Microstructure Evolution and Mechanical Properties of Aluminum During ARB Process, Mater. Sci. Eng., A, 2012, 540, p 13–23CrossRef

17.

R. Bauri, V. Pancholi, I. Samajdar, and M.K. Surappa, Relating Microtexture and Dynamic Micro Hardness in an Extruded AA8090 alloy and AA8090-8 vol% SiCp Composite, Sci. Technol. Adv. Mater., 2005, 6(8), p 933–938CrossRef

18.

C.S. Ramesh, R. Keshavamurthy, P.G. Koppad, and K.T. Kashyap, Role of Particle Stimulated Nucleation in Recrystallization of Hot Extruded Al 6061/SiCp Composites, Trans. Nonferr. Metals Soc. China, 2013, 23(1), p 53–58CrossRef

19.

R. Kirchhofer, J.D. Hunn, P.A. Demkowicz, J.I. Cole, and B.P. Gorman, Microstructure of TRISO Coated Particles from the AGR-1 Experiment: SiC Grain Size and Grain Boundary Character, J. Nucl. Mater., 2013, 432(1–3), p 127–134CrossRef

20.

J. Guo, S. Amira, P. Gougeon, and X.G. Chen, Effect of the Surface Preparation Techniques on the EBSD Analysis of a Friction Stir Welded AA1100-B4C Metal Matrix Composite, Mater. Charact., 2011, 62(9), p 865–877CrossRef

21.

E. Mariani and E. Ghassemieh, Microstructure Evolution of 6061 O Al Alloy During Ultrasonic Consolidation: An Insight from Electron Backscatter Diffraction, Acta Mater., 2010, 58(7), p 2492–2503CrossRef

22.

T. Ma, H. Yamaura, D.A. Koss, and R.C. Voigt, Dry Sliding Wear Behavior of Cast SiC-Reinforced Al MMCs, Mater. Sci. Eng. A, 2003, 360(1–2), p 116–125CrossRef

23.

S.S. Kumar, V.S. Bai, and T. Rajasekharan, Aluminium Matrix Composites by Pressureless Infiltration: The Metallurgical and Physical Properties, J. Phys. D Appl. Phys., 2008, doi:10.1088/0022-3727/41/16/169801

24.

S. Ren, X. He, X. Qu, and Y. Li, Effect of Controlled Interfacial Reaction on the Microstructure and Properties of the SiCp/Al Composites Prepared by Pressureless Infiltration, J. Alloy. Compd., 2008, 455(1–2), p 424–431CrossRef

25.

M. Zhao, G. Wu, and L. Jiang, Aging Behavior and Precipitation Kinetics of SiCp/6061Al Composites, Journal of Materials Science, 2004, 39(5), p 1759–1763CrossRef

26.

C. Kawai, Effect of Interfacial Reaction on the Thermal Conductivity of Al-SiC Composites with SiC Dispersions, J. Am. Ceram. Soc., 2001, 84(4), p 896–898CrossRef

Titel: Specimen Preparation for Metal Matrix Composites with a High Volume Fraction of Reinforcing Particles for EBSD Analysis
verfasst von: A. S. Smirnov
G. A. Belozerov
E. O. Smirnova
A. V. Konovalov
V. P. Shveikin
O. Yu. Muizemnek
Publikationsdatum: 08.06.2016
Verlag: Springer US
Erschienen in: Journal of Materials Engineering and Performance / Ausgabe 7/2016
Print ISSN: 1059-9495
Elektronische ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-016-2164-7

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7/2016

Corrosion and Wear Response of Oxide-Reinforced Nickel Composite Coatings

CuCr2O4 Spinel Ceramic Pigments Synthesized by Sol-Gel Self-Combustion Method for Solar Absorber Coatings

Effect of Minor Zn Additions on the Mechanical and Corrosion Properties of Solution-Treated AM60-2%RE Magnesium Alloy

Numerical Modeling of Ti Deformation for the Development of a Titanium and Stainless Steel Transition Joint

Effect of Homogenization Temperature on Microstructure and Conductivity of Al-Mg-Si-Ce Alloy

Effect of Process Parameters on Dynamic Mechanical Performance of FDM PC/ABS Printed Parts Through Design of Experiment

Premium Partner

Marktübersichten