Ausgabe 12/2007
Inhalt (75 Artikel)
Pre-yield tensile set of a semi-crystalline polymer, its blend and composite
W. C. J. Zuiderduin, J. Huétink, R. J. Gaymans
The synthesis, swelling behaviour and rheological properties of chemically crosslinked thermosensitive copolymers based on N-isopropylacrylamide
Luke M. Geever, César M. Mínguez, Declan M. Devine, Michael J. D. Nugent, James E. Kennedy, John G. Lyons, Austin Hanley, Sinead Devery, Paul T. Tomkins, Clement L. Higginbotham
Molecular dynamics simulations of atomic-level brittle fracture mechanisms in amorphous silica
Krishna Muralidharan, Ki-Dong Oh, P. A. Deymier, K. Runge, J. H. Simmons
X-ray irradiation induced optical absorptions in silver and manganese doped soda-lime silicate glass
Jiawei Sheng, Liqiang Jiang
A multi-scaled model for the fracture toughness of an aluminum alloy
Min Song, Kang Hua Chen, Xiong Wei Qi, Lan Ping Huang
In situ synthesized ceramic–polymer composites for bone tissue engineering: bioactivity and degradation studies
Yusuf M. Khan, Emily K. Cushnie, John K. Kelleher, Cato T. Laurencin
Interfacial stress transfer of fiber pullout for carbon nanotubes with a composite coating
Toshiaki Natsuki, Feng Wang, Q. Q. Ni, Morinobu Endo
The influence of magnetron sputtered silver and titanium coatings on the compaction and properties of surface modified PM Ti-48Al powders
Filipe Neves, Nelson Duarte, Bruno Trindade
Intermetallic FexAly-phases in a steel/Al-alloy fusion weld
Leonardo Agudo, Dominique Eyidi, Christian H. Schmaranzer, Enno Arenholz, Nasrin Jank, Jürgen Bruckner, Anke R. Pyzalla
Strengthening mechanism of load sharing of particulate reinforcements in a metal matrix composite
Bernie Yaping Zong, Fang Zhang, Gang Wang, Liang Zuo
Aluminum hydroxide filled ethylene vinyl acetate (EVA) composites: effect of the interfacial compatibilizer and the particle size
Ling Zhang, Chun Zhong Li, Qiuling Zhou, Wei Shao
Cooling rate dependent as-cast microstructure and mechanical properties of Zr-based metallic glasses
M. Yan, J. Shen, J. F. Sun, J. Zou
Preparation of carbon nanofibers over carbon nanotube-nickel catalyst in propylene decomposition
Yun Zhao, Chunhua Li, Kefu Yao, Ji Liang
Carbon fiber/ceramic matrix composites: processing, oxidation and mechanical properties
Samanta Rafaela de Omena Pina, Luiz Claudio Pardini, Inez Valéria Pagotto Yoshida
Synthesis and characterization of zinc oxide fine particles coated with titania/PDMS hybrid
Masato Nakade, Makoto Ogawa
Effect of structure change on thermal and dielectric characteristics in low-temperature firing Bi2O3–B2O3–ZnO glasses
Byung-Sook Kim, Eun-Sub Lim, Joon-Hyung Lee, Jeong-Joo Kim
Luminescent stability of water-soluble PbS nanoparticles
Xu-Sheng Zhao, She-Yang Xu, Li-Yan Liang, Tao Li, Sam Cauchi
Dielectric, ferroelectric and piezoelectric properties of (1 − x)[Pb0.91La0.09(Zr0.60Ti0.40)O3]–x[Pb(Mg1/3Nb2/3)O3], 0 ≤ x ≤ 1
Benudhar Sahoo, Prasanta Kumar Panda
Calorimetric studies of 8090 and 1441 Al–Li–Cu–Mg–Zr alloys of conventional and retrogressed and reaged tempers
K. S. Ghosh, K. Das, U. K. Chatterjee
Containerless processing of a lithium disilicate glass
K. S. Ranasinghe, C. S. Ray, D. E. Day, J. R. Rogers, R. W. Hyers, T. Rathz
Hardness and tensile strength of multifilamentary metal–matrix composite superconductors for the Large Hadron Collider (LHC)
Christian Scheuerlein, Thierry Boutboul, Daniel Leroy, Luc Oberli, Birgit Rehmer
Influence of pad span on fretting fatigue behaviour of AISI 304 stainless steel
M. Jayaprakash, S. Ganesh Sundara Raman
Experimental study of the quasi-static and dynamic behaviour of cork under compressive loading
Celina Pires Gameiro, José Cirne, Gérard Gary
Combustion and thermal properties of OctaTMA-POSS/PS composites
Lei Liu, Yuan Hu, Lei Song, Shonali Nazare, Shuqin He, Richard Hull
Martensite/particle interactions and the shape memory effect in an Fe–Mn–Si-based alloy
Nicole Stanford, Druce P. Dunne
Bis-ortho-diynylarene polymerization as a route to solid and hollow carbon fibers
Huseyin Zengin, Dennis W. Smith Jr
Fabrication and characterization of PE/MMT nanocomposites via copolymerization of ethylene and in situ formed α-olefins
Jinhua Qian, Cun-Yue Guo, Hang Wang, Youliang Hu
The effect of microstructure and applied stress on magnetic Barkhausen emission in induction hardened steel
Mohamed Blaow, John Terence Evans, Brian A. Shaw
The effect of microstructure on the permeability of metallic foams
Mamoun Medraj, Eric Baril, Virendra Loya, Louis-Philippe Lefebvre
Investigations on coating durability and tenso-resistive effect of carbon black-coated polycaprolactam fibers
Xin Jin, Changfa Xiao, Shulin An, Guangxia Jia
The permeability and stability of microencapsulated epoxy resins
Li Yuan, Guo-Zheng Liang, Jian-Qiang Xie, Lan Li, Jing Guo
Application of uniform design in optimisation of three stage ageing of Al–Cu–Mg alloys
N. Gao, M. J. Starink, N. Kamp, I. Sinclair
Novel sodium alginate composite membranes prepared by incorporating cobalt(III) complex particles used in pervaporation separation of water–acetic acid mixtures at different temperatures
Ravindra S. Veerapur, K. B. Gudasi, M. Sairam, R. V. Shenoy, M. Netaji, K. V. S. N. Raju, B. Sreedhar, Tejraj M. Aminabhavi
Co-precipitation synthesis of Nd:YAG nano-powders: the effect of Nd dopant addition with thermal treatment
Eugenio Caponetti, Maria Luisa Saladino, Filomena Serra, Stefano Enzo
Hot embossing of grating-based optically variable images in thermoplastic acrylic lacquer
P. W. Leech, R. A. Lee
Effect of neodymium on microstructure and corrosion resistance of AZ91 magnesium alloy
Y. L. Song, Yao Hui Liu, S. R. Yu, X. Y. Zhu, S. H. Wang
Experimental study of the transverse mechanical properties of polyamide 6.6 monofilaments
Georgios Stamoulis, Christiane Wagner-Kocher, Marc Renner
Preparation of UV-curable intercalated/exfoliated epoxide/acrylateclays nanocomposite resins
Yu-Young Wang, Tsung-Eong Hsieh
Synthesis of 3-dimensional mesoporous silica using a di-block copolymer template
Jinlan Ju, Huining Xiao, Zisheng Zhang
Investigation on reliability of nanolayer-grained Ti3SiC2 via Weibull statistics
Y. W. Bao, Y. C. Zhou, H. B. Zhang
Novel green-emitting polymer containing fluorene and 1-(2-benzothiazolyl)-3,5-diphenylpyrazoline
Huaxi Zhang, Ying Li, Qing Jiang, Minggui Xie, Junbiao Peng, Yong Cao
Improvement electrical properties of sol–gel derived lead zirconate titanate thick films for ultrasonic transducer application
Q. F. Zhou, K. K. Shung, Y. Huang
Relationship between thermal and sliding wear behavior of Al6061/Al2O3 metal matrix composites
Serdar Osman Yılmaz, Soner Buytoz
Mesocarbon microbeads supported PtSn catalysts for electrochemical oxidation of ethanol
Yuxia Bai, Jinfeng Li, Xinping Qiu, Jianjun Wu, Jianshe Wang, Jingyu Xi, Wentao Zhu, Liquan Chen
Some aspects of corrosion and film formation of austenitic stainless steel type 316LN using electrochemical impedance spectroscopy (EIS)
Mohan G. Pujar, N. Parvathavarthini, R. K. Dayal
Metal–ceramic composite layers on stainless steel through the combination of electrophoretic deposition and galvanic processes
A. Knote, H. G. Krüger, S. Selve, Th. Kups, H. Kern, L. Spiess
Sorption and diffusion of aromatic solvents through linear low density polyethylene–ethylene vinyl acetate blend membranes
K. A. Moly, S. S. Bhagawan, Soney C. George, S. Thomas
A constitutive equation for the dynamic deformation behavior of polymers
F. J. Zerilli, R. W. Armstrong
Analysis of gas sensing behaviors of carbon black/waterborne polyurethane composites in low concentration organic vapors
Bin Zhao, Ruo Wen Fu, Ming Qiu Zhang, Bin Zhang, Wei Zeng, Min Zhi Rong, Qiang Zheng
Microstructural characterisation by X-ray scattering of perovskite-type La0.8Sr0.2MnO3±δ thin films prepared by a dip-coating process
P. Lenormand, A. Lecomte, C. Laberty-Robert, F. Ansart, A. Boulle
Physical properties of low-k films based on the co-condensation of methyltrimethoxysilane with a bridged silsesquioxane
B. R. Kim, J. W. Kang, K. Y. Lee, J. M. Son, M. J. Ko
Effect of bentonite on the structure and mechanical properties of CE/CTBN system
Zhengping Fang, Honghao Shi, Aijuan Gu, Yu Feng
Micro-mechanics based derivation of the materials constitutive relations for carbon-nanotube reinforced poly-vinyl-ester-epoxy based composites
Mica Grujicic, D. C. Angstadt, Y. P. Sun, K. L. Koudela
Effects of calcination conditions on phase and morphology evolution of lead zirconate powders synthesized by solid-state reaction
W. Chaisan, O. Khamman, R. Yimnirun, S. Ananta
Reaction sequences and influence factors during carbothermal synthesis of ultrafine TiN powders
Daoping Xiang, Ying Liu, Zhiwei Zhao, Shengji Gao, Mingjing Tu
Investigation of Sm → Ca substitution in Bi(Pb)SrCaCuO high temperature superconductor by low field AC magnetic susceptibility
Cabir Terzioglu, Dincer Yegen, Mustafa Yılmazlar, Osman Gorur, Mustafa Akdogan, Ahmet Varilci
Effect of microstructure on the modulus of PAN-based carbon fibers during high temperature treatment and hot stretching graphitization
Dongfeng Li, Haojing Wang, Xinkui Wang
Structure of yttria stabilized zirconia beads produced by gel supported precipitation
M. Walter, J. Somers, A. Fernandez, E. D. Specht, J. D. Hunn, P. Boulet, M. A. Denecke, C. Göbel
Microstructure, strength and tribological behavior of Fe–C–Cu–Ni sintered steels prepared with MoS2 addition
S. Dhanasekaran, R. Gnanamoorthy
Formation of aluminosilicate geopolymers from 1:1 layer-lattice minerals pre-treated by various methods: a comparative study
Kenneth J. D. MacKenzie, Dan R. M. Brew, Ross A. Fletcher, R. Vagana
Growth and characterization of high resistivity c-axis oriented ZnO films on different substrates by RF magnetron sputtering for MEMS applications
Ravindra Singh, Mahesh Kumar, Sudhir Chandra
Low temperature oxidation of copper alloys—AEM and AFM characterization
Mari Honkanen, Minnamari Vippola, Toivo Lepistö
Experimental investigation on constitutive behaviour of superconducting powder BSCCO
Yinghong Zhao, Pan Zeng, Liping Lei, Hanping Yi
Microstructure characterization of in situ synthesized porous Si3N4–Si2N2O composites using feldspar additive
Rajat Kanti Paul, Chi-Woo Lee, Hai-Doo Kim, Byong-Taek Lee
Nickel and zirconia toughened alumina prepared by hydrothermal processing
Husheng Jia, Xin Liu, Tianbao Li, Hong Yan, Xuguang Liu, Bingshe Xu
Improvement of mechanical properties of Poly (l-lactic acid) by blending of lysine triisocyanate
Mitsugu Todo, Tetsuo Takayama