Ausgabe 3/2015
Inhalt (40 Artikel)
Retained Austenite Stabilization Through Solute Partitioning During Intercritical Annealing in C-, Mn-, Al-, Si-, and Cr-Alloyed Steels
Singon Kang, Emmanuel De Moor, John G. Speer
Influence of Intra-granular Ferrite on the Tensile Behavior of Intercritically Annealed 12 pct Mn TWIP+TRIP Steel
Sangwon Lee, Bruno C. De Cooman
Effect of Iron on the Enhancement of Magnetic Properties for Cobalt-Based Soft Magnetic Metallic Glasses
Medha Veligatla, Shravana Katakam, Santanu Das, Narendra Dahotre, R. Gopalan, D. Prabhu, D. Arvindha Babu, Haein Choi-Yim, Sundeep Mukherjee
Detection of an Intermediate Layer Containing a Rhenium-Rich Particle at Grain Boundaries Formed Within Single Crystal Nickel-Based Superalloys
KeeHyun Kim, Paul Withey, W. D. Griffiths
Surface Modification of Metallic Glass Composites Through Severe Plastic Deformation
Sundeep Mukherjee, Harpreet Singh Arora, Sanghita Mridha
Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility
Dominik Bösch, Stefan Pogatscher, Marc Hummel, Werner Fragner, Peter J. Uggowitzer, Mathias Göken, Heinz Werner Höppel
Irradiation-Induced Nanoprecipitation in Ni-W Alloys
Jaeyel Lee, Calvin R. Lear, Xuan Zhang, Pascal Bellon, Robert S. Averback
Precipitation of Chromium Nitrides in the Super Duplex Stainless Steel 2507
Niklas Pettersson, Rachel F. A. Pettersson, Sten Wessman
Phase-Field Modeling for Intercritical Annealing of a Dual-Phase Steel
Benqiang Zhu, Matthias Militzer
Characterization of Crystallographic Texture and Intra-Grain Morphology in Cross-Rolled Tantalum
Abhishek Bhattacharyya, Marko Knezevic, Marc Abouaf
Investigation of the Dynamic Strain Aging and Mechanical Properties in Alloy-625 with Different Microstructures
Arnomitra Chatterjee, Garima Sharma, R. Tewari, J. K. Chakravartty
Single Crystal Plasticity Finite Element Analysis of Cu6Sn5 Intermetallic
Soud Farhan Choudhury, Leila Ladani
Effects of Aspect Ratio on the Shear Band Arrangements of Zr-Based Metallic Glasses
Shidong Feng, Gong Li, Pengfei Yu, Shiliang Zhang, Mingzhen Ma, Li Qi, Riping Liu
Influence of Solid Solution Hardening on Creep Properties of Single-Crystal Nickel-Based Superalloys
Ernst Fleischmann, Christian Konrad, Johannes Preußner, Rainer Völkl, Ernst Affeldt, Uwe Glatzel
Study of Ordering and Properties in Fe-Ga Alloys With 18 and 21 at. pct Ga
Igor S. Golovin, L. Yu. Dubov, Yu. V. Funtikov, V. V. Palacheva, J. Cifre, D. Hamana
Mechanical Properties Anisotropy of Isothermally Forged and Precipitation Hardened Inconel 718 Disk
Shaik Khaja, K. K. Mehta, R. Veera Babu, R. Sri Rama Devi, A. K. Singh
Influence of the PM-Processing Route and Nitrogen Content on the Properties of Ni-Free Austenitic Stainless Steel
Kathrin Lefor, M. Walter, A. Weddeling, E. Hryha, S. Huth, S. Weber, L. Nyborg, W. Theisen
Cyclic Deformation Behavior of a Rare-Earth Containing Extruded Magnesium Alloy: Effect of Heat Treatment
F. A. Mirza, D. L. Chen, D. J. Li, X. Q. Zeng
Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-Based Metal Matrix Composite
Yuzheng Zhang, Troy D. Topping, Hanry Yang, Enrique J. Lavernia, Julie M. Schoenung, Steven R. Nutt
Application of MIVM for Sn-Zn System in Vacuum Distillation
LingXin Kong, Bin Yang, BaoQiang Xu, YiFu Li, Yuanshou Hu, DaChun Liu
Effect of Ultrasonic Peening and Accelerated Corrosion Exposure on the Residual Stress Distribution in Welded Marine Steel
Bilal Ahmad, Michael E. Fitzpatrick
Wear Characteristics of Ni-Based Hardfacing Alloy Deposited on Stainless Steel Substrate by Laser Cladding
Reena Awasthi, P. K. Limaye, Santosh Kumar, Ram P. Kushwaha, C. S. Viswanadham, Dinesh Srivastava, N. L. Soni, R. J. Patel, G. K. Dey
Surface Nanocrystallization and Numerical Modeling of Low Carbon Steel by Means of Ultrasonic Shot Peening
Fei Yin, Shan Hu, Lin Hua, Xiaoming Wang, Sergey Suslov, Qingyou Han
Local Magnetic Properties in Non-oriented Electrical Steel and Their Dependence on Magnetic Easy Axis and Misorientation Parameters
Matthew Gallaugher, Arash Samimi, Thomas W. Krause, Lynann C. Clapham, Richard R. Chromik
Effect of Neodymium on Optical Bandgap and Microwave Dielectric Properties of Barium Zirconate Ceramic
Sabyasachi Parida, A. Satapathy, E. Sinha, Anurag Bisen, S. K. Rout
Effect of Cooling Rate on the Dendrite Coherency Point During Solidification of Al2024 Alloy
M. H. Ghoncheh, S. G. Shabestari
Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition
J. H. Li, J. Barrirero, M. Engstler, H. Aboulfadl, F. Mücklich, P. Schumacher
Interplay Between Melt Flow and the 3D Distribution and Morphology of Fe-Rich Phases in AlSi Alloys
Piotr Mikolajczak, Lorenz Ratke
The Influence of ZrO2 Concentration in an Yttria-Based Face Coat for Investment Casting a Ti-45Al-2Mn-2Nb-0.2TiB Alloy Using a Sessile Drop Method
Xu Cheng, Chen Yuan, Stuart Blackburn, Paul A. Withey
On a Fast and Accurate In Situ Measuring Strategy for Recrystallization Kinetics and Its Application to an Al-Fe-Si Alloy
Markus Kühbach, Thiemo Brüggemann, Konstantin D. Molodov, Günter Gottstein
New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior
Raquel Oro, Mónica Campos, Christian Gierl-Mayer, Herbert Danninger, José Manuel Torralba
Effect of Milling Time on Structural Evolution and Mechanical Properties of Garnet Reinforced EN AW6082 Composites
M. Raviathul Basariya, V. C. Srivastava, N. K. Mukhopadhyay
Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering
Walid Mohamed Rashad Mohamed Daoush, Hee Sup Park, Fawad Inam, Byung Kyu Lim, Soon Hyung Hong
In Vitro Analysis of Electrophoretic Deposited Fluoridated Hydroxyapatite Coating on Micro-arc Oxidized AZ91 Magnesium Alloy for Biomaterials Applications
Mehdi Razavi, Mohammadhossein Fathi, Omid Savabi, Daryoosh Vashaee, Lobat Tayebi
Mechanical Behavior of Nano-crystalline Metallic Thin Films and Multilayers Under Microcompression
Jiangting Wang, Chunhui Yang, Peter D. Hodgson
The Effect of Y/Ti Ratio on Oxide Precipitate Evolution in ODS Fe-14 Wt Pct Cr Alloys
Sheng-Yi Zhong, Joel Ribis, Nicolas Lochet, Yann de Carlan, Vincent Klosek, Vincent Ji, Marie-Hélène Mathon
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
L. M. Sochalski-Kolbus, E. A. Payzant, P. A. Cornwell, T. R. Watkins, S. S. Babu, R. R. Dehoff, M. Lorenz, O. Ovchinnikova, C. Duty