Ausgabe 5/2014
Inhalt (37 Artikel)
The Impact of Microstructure on Yield Strength Anisotropy in Linepipe Steels
P. K. C. Venkatsurya, R. D. K. Misra, M. D. Mulholland, M. Manohar, J. E. Hartmann
Volume Shrinkage Induced by Interfacial Reaction in Micro-Ni/Sn/Ni Joints
C. C. Li, C. K. Chung, W. L. Shih, C. R. Kao
Fabrication of an In Situ Bulk Metallic Glass Composite with High Magnesium Content
Olga Biletska, Kevin J. Laws, Mark A. Gibson, Michael Ferry
Fabrication and Mechanical Characterization of Ti-Based Metallic Glass Matrix Composites by the Bridgman Solidification
Y. S. Wang, G. J. Hao, Y. Zhang, J. P. Lin, J. W. Qiao
Thermodynamic Basis for Glass Formation in Cu-Zr Rich Ternary Systems and Their Synthesis by Mechanical Alloying
S. Vincent, Jatin Bhatt, B. S. Murty
ANSYS-Based Simulation and Optimization on Temperature Field of Amorphous Ingot Made by Water Quenching
W. Zhao, Z. Sun, Z. Tang, P. K. Liaw, J. Li, R. P. Liu, Gong Li
Combinatorial Influence of Bimodal Size of B2 TiCu Compounds on Plasticity of Ti-Cu-Ni-Zr-Sn-Si Bulk Metallic Glass Composites
Sung Hwan Hong, Jeong Tae Kim, Min Woo Lee, Jin Man Park, Min Ha Lee, Bum Sung Kim, Jun Young Park, Yongho Seo, Jin Yoo Suh, Peng Yu, Ma Qian, Ki Buem Kim
Tensile Mechanical Behaviors of In Situ Metallic Glass Matrix Composites at Ambient Temperature and in Supercooled Liquid Region
T. Zhang, J. Y. Shi, J. W. Qiao, H. J. Yang, P. K. Liaw
Stored Mechanical Work in Inhomogeneous Deformation Processes of a Pd-Based Bulk Metallic Glass
Stefan Küchemann, Hannes Wagner, Moritz Schwabe, Dennis Bedorf, Walter Arnold, Konrad Samwer
Effects of Alloying Elements on the Thermal Stability and Corrosion Resistance of an Fe-based Metallic Glass with Low Glass Transition Temperature
Yanhui Li, Xingjie Jia, Wei Zhang, Canfeng Fang, Xuewei Wang, Fengxiang Qin, Shinichi Yamaura, Yoshihiko Yokoyama
Crystallization of Phase-Separated Pd41.25Ni41.25P17.5 BMGs
Z. D. Wu, S. Lan, H. W. Kui
Embrittlement in CN3MN Grade Superaustenitic Stainless Steels
Mertcan Başkan, Scott L. Chumbley, Yunus Eren Kalay
Thermal Desorption Spectroscopy Evaluation of the Hydrogen-Trapping Capacity of NbC and NbN Precipitates
Elien Wallaert, Tom Depover, Muhammad Arafin, Kim Verbeken
An Atom Probe Study of Kappa Carbide Precipitation and the Effect of Silicon Addition
Laura N. Bartlett, David C. Van Aken, Julia Medvedeva, Dieter Isheim, Nadezhda I. Medvedeva, Kai Song
The Effect of Cooling Rate from Solution on the Lattice Misfit During Isothermal Aging of a Ni-Base Superalloy
L. D. Connor, H. J. Stone, D. M. Collins, M. Preuss, M. C. Hardy, C. M. F. Rae
Dynamic Simulation of the Thermal Decomposition of Pyrite Under Vacuum
Jiushuai Deng, Shuming Wen, Xiumin Chen, Yongjun Xian, Dandn Wu
Carbide Precipitation During Tempering of a Tool Steel Subjected to Deep Cryogenic Treatment
V. G. Gavriljuk, V. A. Sirosh, Yu. N. Petrov, A. I. Tyshchenko, W. Theisen, A. Kortmann
Comparison Between Different Processing Schedules for the Development of Ultrafine-Grained Dual-Phase Steel
Anish Karmakar, S. Sivaprasad, S. K. Nath, R. D. K. Misra, Debalay Chakrabarti
Indentation Size Effect (ISE) in Copper Subjected to Severe Plastic Deformation (SPD)
Joshua D. Gale, Ajit Achuthan, David J. Morrison
Creep–Environment Interactions in Dwell-Fatigue Crack Growth of Nickel Based Superalloys
Kimberly Maciejewski, Jinesh Dahal, Yaofeng Sun, Hamouda Ghonem
A New Approach of Improving Rain Erosion Resistance of Nanocomposite Sol-Gel Coatings by Optimization Process Factors
Akbar Hojjati Najafabadi, Reza Shoja Razavi, Reza Mozaffarinia, Hamed Rahimi
Creep and Stress Relaxation Anisotropy of a Single-Crystal Superalloy
Mikael Segersäll, Johan J. Moverare, Daniel Leidermark, Kjell Simonsson
A Method for the Estimation of the Interface Temperature in Ultrasonic Joining
Tianyu Hu, Soheil Zhalehpour, Andrew Gouldstone, Sinan Muftu, Teiichi Ando
Magnetic Field-Induced Precipitation Behaviors of Alloy Carbides M2C, M3C, and M6C in a Molybdenum-Containing Steel
T. P. Hou, Y. Li, Y. D. Zhang, K. M. Wu
Dendritic Growth in Mg-Based Alloys: Phase-Field Simulations and Experimental Verification by X-ray Synchrotron Tomography
Mingyue Wang, Yanjin Xu, Qiwei Zheng, Sujun Wu, Tao Jing, Nikhilesh Chawla
Kinetics of Sub-Micron Grain Size Refinement in 9310 Steel
Thomas Kozmel, Edward Y. Chen, Charlie C. Chen, Sammy Tin
Grain Refinement in Pure Aluminum Severely Deformed by Equal Channel Angular Extrusion via Extended Processing Routes
Saiyi Li, Xiaodi Zheng, Mingliang Zhang
Modeling of Laser-Tempering Process for Hyper-Eutectoid Steels
Satyanarayanan Raghavan, Shreyes N. Melkote, Jung-Il Hong
Fabrication of Porous Ti-rich Ti51Ni49 by Evaporating NaCl Space Holder
Fu-Cheng Yen, Kuen-Shyang Hwang, Shyi-Kaan Wu
Hot Extrusion of A356 Aluminum Metal Matrix Composite with Carbon Nanotube/Al2O3 Hybrid Reinforcement
H. H. Kim, J. S. S. Babu, C. G. Kang
Thermo-mechanical Response and Damping Behavior of Shape Memory Alloy–MAX Phase Composites
Ankush Dilip Kothalkar, Rogelio Benitez, Liangfa Hu, Miladin Radovic, Ibrahim Karaman
Ultrafine Grain Formation in a Ti-6Al-4V Alloy by Thermomechanical Processing of a Martensitic Microstructure
Qi Chao, Peter D. Hodgson, Hossein Beladi