Ausgabe 9/1997
Inhalt (24 Artikel)
Transformations in α 2+γ titanium aluminide alloys containing molybdenum: Part II. Heat treatment
A. K. Singh, D. Banerjee
A variant selection model for predicting the transformation texture of deformed austenite
M. P. Butrón-Guillén, C. S. Da Costa Viana, J. J. Jonas
Precipitation behavior in ultra-low-carbon steels containing titanium and niobium
M. Hua, C. I. Garcia, A. J. DeArdo
Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins
Sirous Asgari, Ehab El-Danaf, Surya R. Kalidindi, Roger D. Doherty
Fracture toughness and fatigue crack growth in rapidly quenched Nb-Cr-Ti In situ composites
K. S. Chan, D. L. Davidson, D. L. Anton
Thermal cycling behavior of as-quenched and aged Ti-6Al-4V alloy
Hongbin Geng, Shiyu He, Tingquan Lei
Elevated temperature fracture toughness of Al-Cu-Mg-Ag sheet: Characterization and modeling
Michael J. Haynes, Richard P. Gangloff
A thermodynamic analysis of the empirical power relationships for creep rate and rupture time
A. J. Krasowsky, L. Toth
Compressive creep behavior of spray-formed gamma titanium aluminide
B. Li, J. Wolfenstine, J. C. Earthman, E. J. Lavernia
Wear characteristics of TiNi shape memory alloys
H. C. Lin, J. L. He, K. C. Chen, H. M. Liao, K. M. Lin
Microtexture and grain boundary evolution during microstructural refinement processes in SUPRAL 2004
Terry R. McNelley, Michael E. McMahon
Solidification paths and carbide morphologies in melt-processed MoSi2-SiC In Situ composites
Daniel J. Tilly, Jan P. A. Löfvander, Carlos G. Levi
Interfaces in MoSi2-SiC In Situ composites synthesized by melt processing
Daniel J. Tilly, Jan P. A. Löfvander, Marc DeGraef, Carlos G. Levi
High strain rate torsional behavior of an ultrahigh carbon steel (1.8 Pct C-1.6 Pct Al) at elevated temperature
Manuel Carsi, Oscar A. Ruano, Felix Peñalba, Qleg D. Sherby
Optimization of microstructure development during hot working using control theory
James C. Malas III, W. Garth Frazier, Enrique A. Medina, Steven Medeiros, W. M. Mullins, Anil Chaudhary, S. Venugopal, R. Dennis Irwin, Raghavan Srinivasan
Element partitioning during coarsening of (γ − γ′) Ni-Al-Mo alloys
M. Fährmann, E. Fährmann, T. M. Pollock, W. C. Johnson
Formation of the Al-Rich phase on grain boundary and the creep damage mechanism in directionally solidified Ni-base superalloy
S. Komazaki, T. Shoji
Wear behavior of As-cast ZnAl27/SiC particulate metal-matrix composites under lubricated sliding condition
S. C. Tjong, F. Chen