Ausgabe 1/2012
Inhalt (19 Artikel)
Preparation and Characterization of Cast Ferrous Metal Matrix Composites
R. R. Dash, A. K. Chakrabarti, P. S. Mukherjee
Effects of Different Boron Compounds on the Corrosion Resistance of Andalusite-Based Low-Cement Castables in Contact with Molten Al Alloy
Esmaeil AdabiFiroozjaei, Pramod Koshy, Charles Chris Sorrell
Experimental Study of Ferrous Calcium Silicate Slags: Phase Equilibria at Between 10−5 atm and 10−7 atm
Taufiq Hidayat, Peter C. Hayes, Evgueni Jak
Experimental Study of Ferrous Calcium Silicate Slags: Phase Equilibria at Between 10–8 atm and 10–9 atm
Taufiq Hidayat, Peter C. Hayes, Evgueni Jak
Computational Fluid Dynamic Modeling of Zinc Slag Fuming Process in Top-Submerged Lance Smelting Furnace
Nazmul Huda, Jamal Naser, Geoffrey Brooks, Markus A. Reuter, Robert W. Matusewicz
Modeling Viscosities of CaO-MgO-FeO-MnO-SiO2 Molten Slags
Guo-Hua Zhang, Kuo-Chih Chou, Qing-Guo Xue, Kenneth C. Mills
Effect of Gas Atmosphere on Carbothermal Reduction and Nitridation of Titanium Dioxide
Sheikh A. Rezan, Guangqing Zhang, Oleg Ostrovski
Analysis of Distribution of Nonmetallic Inclusions in Aluminum DC-Cast Billets and Slabs
Majed M. Jaradeh, Torbjorn Carlberg
Some Observations on Microstructural Changes in a Mg-Based AE42 Alloy Subjected to Friction Stir Processing
Harpreet Singh Arora, Harpreet Singh, B. K. Dhindaw
A Unified Mechanism for the Formation of Oscillation Marks
Pavel E. Ramirez Lopez, Kenneth C. Mills, Peter D. Lee, Begoña Santillana
Effect of Activated Flux on the Microstructure, Mechanical Properties, and Residual Stresses of Modified 9Cr-1Mo Steel Weld Joints
V. Maduraimuthu, M. Vasudevan, V. Muthupandi, A. K. Bhaduri, T. Jayakumar
Thermal Transients During Processing of 3003 Al-H18 Multilayer Build by Very High-Power Ultrasonic Additive Manufacturing
M. R. Sriraman, Matt Gonser, Daniel Foster, Hiromichi T. Fujii, S. S. Babu, Matt Bloss
Film Boiling and Water Film Ejection in the Secondary Cooling Zone of the Direct-Chill Casting Process
Etienne Caron, Mary A. Wells
Nitrogen Oxide Formation in the Electric Arc Furnace—Measurement and Modeling
Thomas Echterhof, Herbert Pfeifer
The Magnitude and Origin of Residual Stress in Ti-6Al-4V Linear Friction Welds: An Investigation by Validated Numerical Modeling
R. Turner, R. M. Ward, R. March, R. C. Reed
Microstructure and Thickness of 55 pct Al-Zn-1.6 pct Si-0.2 pct RE Hot-Dip Coatings: Experiment, Thermodynamic, and First-Principles Study
Guangxin Wu, Jieyu Zhang, Qian Li, Kuochih Chou, Xiaochun Wu