Ausgabe 1/2019
Inhalt (20 Artikel)
Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
Z. He, J. H. Lin, X. Y. Sun, X. Gu
Simulation of the Lightweight Ceramic/Aluminum Alloy Composite Armor for Optimizing Component Thickness Ratios
Z.-L. Chang, W.-L. Zhao, G.-P. Zou, H.-Q. Sun
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
A. F. Guo, J. F. Li, F. Y. Li, J. Xu, C. W. Zhang, S. Chen
Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates
Z. Y. Chen, J. X. Li, Z. G. Lin, J. J. Qi, L. Sun, G. D. Wang
Thermomechanical Coupling Model for a Stainless Steel-Clad Plate on Heat Treatment
B. Guan, Y. Zang, F. Yang, X. Y. Yang, Q. Qin
Centrifuge Simulation of the Thermal Response of a Dry Sand-Embedded Diaphragm Wall
S. You, C. H. Zhang, X. H. Cheng, M. Zhu
Effect of Pin Diameters on the Wear Characteristics of Friction Pairs
Y. H. Wei, X. L. Wang, Y. P. Liu, L. J. Chen
Preparation, Properties, and Microstructure of Graphite Powder-Containing Conductive Concrete
S. H. Liu, M. Q. Wu, M. J. Rao, L. H. Li, H. L. Xiao
Smooth Particle Hydrodynamics-Based Characteristics of a Shaped Jet from Different Materials
J. P. Yin, Z. X. Shi, J. Chen, B. H. Chang, J. Y. Yi
Optimization of Residual Stresses in Laser-Mixed WC(Co, Ni) Coatings
C. W. Liu, M. D. Jean, Q. T. Wang, B. S. Chen
Fatigue Strength and Life Prediction of a MAR-M247 Nickel-Base Superalloy Gas Turbine Blade with Multiple Carbide Inclusions
H. Lin, H. P. Geng, Y. Y. Zhang, H. Li, X. Y. Liu, X. F. Zhou, L. Yu
Construction and Verification of the Constitutive Model of Pure Copper Deformation at Elevated Temperatures
S. H. Huang, Y. Wu, Z. D. Zhao, X. S. Xia
Effect of the Surface Texture on Laser Joining of a Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
L. Y. Sheng, C. Lai, Z. F. Xu, J. K. Jiao
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
X. L. Hu, Y. J. Liu, C. X. Huang, Q. Y. Wang
Influence of H2S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel
L. Gu, J. Wang, C. B. Luan, X. Y. Li
Optimal Design of Failure-Censored Constant-Stress Life Test Plans for the Inverse Weibull Distribution
Ali A. Ismail, A. Al Tamimi