Ausgabe 4/2019
Inhalt (22 Artikel)
Microstructure Variation of Ultrasuper Critical 11Cr Ferritic Steel Under Long-Term Thermal Ageing and Creep
C. S. Kim
Elastoplastic Assessment of Limiting Internal Pressure in Thick-Walled Cylinders with Different Tension-Compressive Response
S. Wang, Q. Zhu, J. H. Zhao, X. P. Yue, Y. J. Jiang
Simulation of Impact Fracture Behavior of Laminated Glass Based on DEM/FEM and Cohesive Model
Z. G. Yang, M. Y. Zang, Y. L. Cheng
Effect of the Eutectic Phase on the Microstructure and Tensile Strength of an Al–Zn–Ni–Mg–Cu Casting Aluminum Alloy
D. H. Chen, Z. Chen, X. R. Zhu, X. D. Wang, X. L. Hong
Effect of Heat Treatment on the Microstructure and Strength of Stainless Steel-Clad Plate
H. R. Jin, C. X. Duan, M. F. Han, Y. L. Yi
A Novel Inclined Excitation Method for Crack Detection of Non-Ferromagnetic Materials Using Eddy Current Thermography
Z. W. Yang, H. P. Yan, Y. Li, G. J. Kou, G. Tian, W. Zhang
Assessment of Cold Extrusion Effect on Stress–Strain Curves of Pure Copper Arc Parts Based on the Cosine Velocity Model
S. H. Huang, Y. Wu, X. S. Xia, Z. D. Zhao, Q. Chen, D. Y. Shu
Fatigue Life Prediction of the Gear Box in Tracked Vehicles Based on Running Simulation Tests
X. J. Du, S. R. Zhang, Y. H. Zhang
Residual Stresses in Ultrasonic-Assisted Laser Sintered Grinding Diamond Materials
Z. B. Yang, Y. Q. Zhang, S. Y. Zhang, J. C. Hu, K. Q. Li, B. Zhao
Microstructure and Microwave Absorption Properties of Cement-Based Material Reinforced with Reduced Graphene Oxide and Nanoparticles
Y. F. Sun, T. S. Zhou, P. W. Gao, M. Chen, H. W. Liu, Y. Xun
Effect of Zn on the Mechanical Properties and Microstructure of as-Cast and Solution-Treated Mg–6Y–2Nd–1Gd–0.5Zr Alloys
J. Q. Tao, S. H. Huang, G. Z. Zhao, Z. W. Huang, Y. Wu, Y. Y. Wan, M. Li
Density Effect of PTFE-Copper Powder Metallurgy Liner Material on the Perforation Performance of Shaped Charge Jets
Y. J. Xu, Z. J. Wang, G. D. Wu, J. P. Yin, F. D. Dong, Y. X. Jin
Effect of Drilling-Induced Delamination on Buckling Behavior of Open Hole Composite Laminate Specimens Under Compressive Loading
Q. F. Duan, S. X. Li, P. H. Song, W. Cheng, D. F. Cao, H. X. Hu
Thermoelastic Stress-Strain Analysis of the Meshing Pairs of a Two-Tooth Difference Swing-Rod Movable Toothed Drive
Y. L. Yi, Y. F. Gao, L. He, H. R. Jin
Stress Corrosion of Bridge Cable Wire by the Response Surface Method
C. Q. Miao, M. L. Zhuang, B. Dong
Acidic-Thermal Ageing Effect on Compression Stress Relaxation of Silicone Rubber
G. Li, J. M. Gong, J. Z. Tan, D. S. Zhu, W. H. Jia, X. J. Lu
Stress-Strain and form Accuracy of Carbon Steel Components Produced by a Multi-Point Stretch Forming Technique
J. Xing, Y. Y. Cheng, Z. Yi
Effect of Sampling Interval and Anisotropy on Laser Scanning Accuracy in Rock Material Surface Roughness Measurements
S. M. Hu, L. Huang, Z. J. Chen, Z. M. Ji, Z. Liu
Correction to: Comparative Analysis of Processing Techniques’ Effect on the Strength of Carbon Black (N220)-Filled Poly(Lactic Acid) Composites
A. V. Rane, K. Kanny, A. Mathew, T. P. Mohan, S. Thomas