nach oben

Rare Metals

Erschienen in:

16.10.2020 | Original Article

Stability of passive film and antibacterial durability of Cu-bearing L605 alloy in simulated physiological solutions

verfasst von: Peng-Fei Geng, Jin-Long Zhao, Tong Xi, Chun-Guang Yang, Ke Yang

Erschienen in: Rare Metals | Ausgabe 5/2021

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

In this work, the stability of passive film for long-time immersed Cu-bearing L605 (L605-Cu) alloy in the phosphate buffer solution (PBS) was studied by potentiodynamic polarization and electrochemical impedance spectroscopy. The results showed that the impedance of passive film for L605-Cu alloy experienced an initial increase and subsequent stabilization with the increase in the immersion time. In addition, the plate count method was employed to assess the antibacterial durability of L605-Cu alloy against Escherichia coli after long-time immersion. The results indicated that the antibacterial rate of L605-Cu alloy presented a declining tendency with the immersion time prolonging. X-ray photoelectron spectroscopy (XPS) was used to analyze the change of the chemical composition in the passive film on L605-Cu alloy immersed in the PBS for different time. The results showed that Cu content and its compounds in the passive film gradually increased with the immersion time prolonging, hinting declined activity of Cu ions penetrating into the passive film, which resulted in a decrease in the antibacterial performance.

Vorheriger Artikel Synthesis, characterization and photoluminescent properties of Eu(III) complexes with 5-hydroxy-2-hydroxymethyl-4H-4-pyranone and N,N′-donor heterocyclic coligands

Nächster Artikel Directional solidification behavior of turbine blades in DZ125 alloy: design of blade numbers on assembly

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

[1]

Vidal CV, Muñoz AI. Effect of thermal treatment and applied potential on the electrochemical behavior of CoCrMo biomedical alloy. Electrochim Acta. 2009;54(6):1798.

[2]

Igual Muñoz A, CasabánJulián L. Influence of electrochemical potential on the tribocorrosion behaviour of high carbon CoCrMo biomedical alloy in simulated body fluids by electrochemical impedance spectroscopy. Electrochim Acta. 2010;55(19):5428.

[3]

Hodgson E, Kurz S, Virtanen S, Fervel V, Olsson A, Mischler S. Passive and transpassive behaviour of CoCrMo in simulated biological solutions. Electrochim Acta. 2004;49(13):2167.

[4]

Li ZD, Zhang WW, Li GT, Li SS, Ding HS, Zhang T, Song YJ. Magnetic field annealing of FeCo-based amorphous alloys to enhance thermal stability and Curie temperature. Rare Met. 2018;38(4):552.

[5]

Paloma AA, Hanssen AD, Osmon DR. High rate of aminoglycoside resistance among staphylococci causing prosthetic joint infection. Clin Orthop Relat Res. 2005;439(439):43.

[6]

Liu J, Li FB, Liu C, Wang HY, Ren BH, Yang K, Zhang EL. Effect of Cu content on the antibacterial activity of titanium–copper sintered alloys. Mater Sci Eng C. 2014;35(2):392.

[7]

Hu H, Zhang W, Qiao Y, Jiang X, Liu X, Ding C. Antibacterial activity and increased bone marrow stem cell functions of Zn-incorporated TiO₂ coatings on titanium. Acta Biomater. 2012;8(2):904.

[8]

Tan L, Li J, Liu XM, Cui ZD, Yang XJ, Zhu SL, Li ZY, Yuan XB, Zheng YF, Yeung KWK, Pan HB, Wang XB, Wu SL. Rapid biofilm eradication on bone implants using red phosphorus and near-infrared light. Adv Mater. 2018;30(31):1801808.

[9]

Jin G, Qin H, Cao H, Qian S, Zhao Y, Peng X, Zhang X, Liu X, Chu PK. Synergistic effects of dual Zn/Ag ion implantation in osteogenic activity and antibacterial ability of titanium. Biomaterials. 2014;35(27):7699.

[10]

Hu X, Neoh KG, Zhang J, Kang ET. Bacterial and osteoblast behavior on titanium, cobalt-chromium alloy and stainless steel treated with alkali and heat: a comparative study for potential orthopedic applications. J Colloid Interface Sci. 2014;417(3):410.

[11]

Xie GC, Wang LG, Wang JW. A high-throughput experimental characterization of composition elasticity relationship of Cu-Ni-Ti alloy. Chin J Rare Met. 2019;43(3):233.

[12]

Zhang E, Liu C. A new antibacterial Co-Cr-Mo-Cu alloy: preparation, biocorrosion, mechanical and antibacterial property. Mater Sci Eng C. 2016;69(12):134.

[13]

Jia M, Zhang YH, Zhao SY, Liu YL. Antibacterial ability and cytocompatibility of Cu-incorporated Ni-T-O nanopores on NiTi alloy. Rare Met. 2019;38(6):552.

[14]

Li M, Nan L, Xu D, Ren G, Yang K. Antibacterial performance of a Cu-bearing stainless steel against microorganisms in tap water. J Mater Sci Technol. 2015;31(3):243.

[15]

Cai DG, Bao MM, Wang XY, Yang L, Zhang EL. Biocorrosion properties of Ti–3Cu alloy in F ion-containing solution and acidic solution and biocompatibility. Rare Met. 2019;38(6):503.

[16]

Wang S, Yang C, Ren L, Shen M, Yang K. Study on antibacterial performance of Cu-bearing cobalt-based alloy. Mater Lett. 2014;129(8):88.

[17]

Huang YS, Huang HH. Effects of clinical dental implant abutment materials and their surface characteristics on initial bacterial adhesion. Rare Met. 2019;38(6):512.

[18]

Zhang EL, Fu S, Wang RX, Li HX, Liu Y. Role of Cu element in biomedical metal alloy design. Rare Met. 2019;38(6):476.

[19]

Ziemniak SE, Hanson M. Zinc treatment effects on corrosion behavior of Alloy 600 in high temperature, hydrogenated water. Corros Sci. 2006;48(10):498.

[20]

Sun H, Wu X, Han EH. Effects of temperature on the oxide film properties of 304 stainless steel in high temperature lithium borate buffer solution. Corros Sci. 2009;51(12):2840.

[21]

Mottu N, Vayer M, Dudognon J, Erre R. Structure and composition effects on pitting corrosion resistance of austenitic stainless steel after molybdenum ion implantation. Surf Coat Technol. 2005;200(7):2131.

[22]

Jinlong Z, Zhaofeng Z, Da S, Chunguang Y. Antibacterial durability and biocompatibility of antibacterial-passivated 316L stainless steel in simulated physiological environment. Mater Sci Eng C. 2019;100(7):396.

[23]

Suzuki S, Imai S, Kourai H. Background and evidence leading to the establishment of the JIS standard for antimicrobial products. Biocontrol Sci. 2006;11(3):135.

[24]

Yan S, Liang T, Chen J, Li T, Liu X. A novel Cu-Ni added medium Mn steel: precipitation of Cu-rich particles and austenite reversed transformation occurring simultaneously during ART annealing. Mater Sci Eng A. 2019;746(2):73.

[25]

Zhao JL, Xu DK, Shahzad MB, Kang Q, Sun Y, Sun ZQ, Zhang SY, Ren L, Yang CG, Yang K. Effect of surface passivation on corrosion resistance and antibacterial properties of Cu-bearing 316L stainless steel. Appl Surf Sci. 2016;386(11):371.

[26]

Rondelli G, Torricelli P, Fini M, Giardino R. In vitro corrosion study by EIS of a nickel-free stainless steel for orthopaedic applications. Biomaterials. 2005;26(7):739.

[27]

Parham RA, Kaustinen HM. Differential staining of tannin in sections of epoxy-embedded plant cells. Stain Technol. 1976;51(4):237.

[28]

Hermas AA, Morad MS. A comparative study on the corrosion behavior of 304 austenitic stainless steel in sulfumic and sulfuric acid solutions. Corros Sci. 2008;50(9):2710.

[29]

Zhao J, Yang C, Zhang D, Zhao Y, Khan MS, Xu D, Xi T, Li X, Yang K. Investigation on mechanical, corrosion resistance and antibacterial properties of Cu-bearing 2205 duplex stainless steel by solution treatment. RSC Adv. 2016;6(11):112738.

[30]

Oje AM, Ogwu AA, Rahman SU, Ojea AI, Tsendzughu N. Effect of temperature variation on the corrosion behaviour and semiconducting properties of the passive film formed on chromium oxide coatings exposed to saline solution. Corros Sci. 2019;154(7):28.

[31]

Zhu L, Elguindi J, Rensing C, Ravishankar S. Antimicrobial activity of different copper alloy surfaces against copper resistant and sensitive Salmonella enterica. Food Microbiol. 2012;30(1):303.

[32]

Shuai C, Liu L, Zhao M, Feng P, Yang Y, Guo W, Gao C, Yuan F. Microstructure, biodegradation, antibacterial and mechanical properties of ZK60-Cu alloys prepared by selective laser melting technique. J Mater Sci Technol. 2018;34(10):234.

[33]

Peng C, Liu Y, Liu H, Zhang S, Bai C, Wan Y, Ren L, Yang K. Optimization of annealing treatment and comprehensive properties of Cu-containing Ti6Al4V-xCu alloys. J Mater Sci Technol. 2019;35(10):2121.

[34]

Moniri JS, Alipour S, Akbarpour MR. Microstructural characterization and enhanced hardness, wear and antibacterial properties of a powder metallurgy SiC/Ti-Cu nanocomposite as a potential material for biomedical applications. Ceram Int. 2019;45(8):10603.

[35]

Ma Z, Yao M, Liu R, Yang K, Ren L, Zhang Y, Liao Z, Liu W, Qi M. Study on antibacterial activity and cytocompatibility of Ti-6Al-4V-5Cu alloy. Mater Technol. 2014;30(11):80.

[36]

Lizama-Tzec FI, Macías JD, Estrella-Gutiérrez MA, Cahue-López AC, Alvarado-Gil JJ, Oskam G. Electrodeposition and characterization of nanostructured black nickel selective absorber coatings for solar–thermal energy conversion. J Mater Sci Mater Electron. 2015;26(8):5553.

[37]

Oguzie EE, Li J, Liu Y, Chen D, Li Y, Yang K, Wang F. The effect of Cu addition on the electrochemical corrosion and passivation behavior of stainless steels. Electrochim Acta. 2010;55(17):5028.

[38]

Asami K, Hashimoto K, Shimodaira S. XPS determination of compositions of alloy surfaces and surface oxides on mechanically polished iron-chromium alloys. Corros Sci. 1977;17(9):713.

[39]

Dai C, Luo H, Li J, Du C, Liu Z, Yao J. X-ray photoelectron spectroscopy and electrochemical investigation of the passive behavior of high-entropy FeCoCrNiMo_x alloys in sulfuric acid. Appl Surf Sci. 2019;499(1):143903.

[40]

Matković T, Matković P, Malina J. Effects of Ni and Mo on the microstructure and some other properties of Co-Cr dental alloys. J Alloy Compd. 2004;366(1):293.

[41]

Li Y, Fan X, Tang N, Bian H, Hou Y, Koizumi Y, Chiba A. Effects of partially substituting cobalt for nickel on the corrosion resistance of a Ni-16Cr-15Mo alloy to aqueous hydrofluoric acid. Corros Sci. 2014;78(1):101.

Titel: Stability of passive film and antibacterial durability of Cu-bearing L605 alloy in simulated physiological solutions
verfasst von: Peng-Fei Geng
Jin-Long Zhao
Tong Xi
Chun-Guang Yang
Ke Yang
Publikationsdatum: 16.10.2020
Verlag: Nonferrous Metals Society of China
Erschienen in: Rare Metals / Ausgabe 5/2021
Print ISSN: 1001-0521
Elektronische ISSN: 1867-7185
DOI: https://doi.org/10.1007/s12598-020-01599-8

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 5/2021

In situ synthesis of polycrystalline cubic boron nitride in cBN–Al–Ti system with different Gd2O3 additions

Photocatalytic activity of perovskite SrTiO3 catalysts doped with variable rare earth ions

Structural, mechanical, thermodynamic and electronic properties of Pt3M (M = Al, Co, Hf, Sc, Y, Zr) compounds under high pressure

Improving phase transition temperature of VO2 via Ge doping: a combined experimental and theoretical study

Preparation and surface modification of 3D printed Ti–6Al–4V porous implant

Enhanced electrochemical properties of Sm0.2Ce0.8O1.9 film for SOFC electrolyte fabricated by pulsed laser deposition

Premium Partner

Marktübersichten