nach oben

Metal Science and Heat Treatment

Erschienen in:

20.12.2023 | ADDITIVE TECHNOLOGIES, POWDER AND COMPOSITE MATERIALS

Structure and Phase Composition of Heat Treated Al – Zr Bimetal

verfasst von: Yu. Yu. Emurlaeva, M. N. Khomyakov, N. S. Aleksandrova, K. I. Emurlaev, I. A. Bataev

Erschienen in: Metal Science and Heat Treatment | Ausgabe 7-8/2023

Einloggen

Aktivieren Sie unsere intelligente Suche, um passende Fachinhalte oder Patente zu finden.

search-config

KI-gestützte Suche

Aus

Abstract

Special features of structural and phase transformations occurring in annealing of an explosion-welded Al – Zr bimetal are considered. It is shown that heat treatment causes formation and growth of an intermetallic layer on the interface, which has a hardness of 9 GPa. The methods of microscopic x-ray spectrum analysis and of phase analysis with the use of synchrotron radiation are used to show that the intermetallic layer is represented by a ZrAl₃ phase with a D0₂₃-type structure. The lattice constants of this phase vary gradually from the metal-intermetallic interfaces to the center of the layer. Quantum-chemical modeling by the method of density functional is used to show that the zirconium trialuminide is in the steadiest state at a certain distance from the interface due to the process of secondary recrystallization and the accompanying annihilation of crystal structure defects.

Vorheriger Artikel Orientation Relationships and Changes in the Composition of S2 Titanium Silicides in Titanium Pseudo-β-Alloy VT47

Nächster Artikel Effect of Heat Treatment on the Hardness and Electrical Connectivity of an Aluminum Composite Reinforced with Al2O3 Nanoparticles

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

Jetzt informieren

Yu. Yu. Emurlaeva, I. V. Ivanov, D. V. Lazurenko, et al., “On the texture and superstructure formation in Ti – TiAl₃ – Al MIL composites,” Intermetallics, 135, 107231 (2021). https://doi.org/10.1016/j.intermet.2021.107231CrossRef

D. V. Lazurenko, I. A. Bataev, V. I. Mali, et al., “Synthesis of metal-intermetallic laminate (MIL) composites with modified Al₃Ti structure and in situ synchrotron x-ray diffraction analysis of sintering process,” Mater. Des., 151, 8 – 16 (2018). https://doi.org/10.1016/j.matdes.2018.04.038CrossRef

D. V. Lazurenko, I. Y. Petrov, V. I. Mali, et al., “Ti – Al₃Ti metal – intermetallic laminate (MIL) composite with a cubic titanium trialuminide stabilized with silver: Selection of fabrication regimes, structure and properties,” J. Alloys Compd., 916, 165480 (2022). https://doi.org/10.1016/j.jallcom.2022.165480CrossRef

D. V. Lazurenko, V. V. Lozanov, A. Stark, et al., “In situ synchrotron x-ray diffraction study of reaction routes in Ti – Al₃Ti-based composites: The effect of transition metals on L12 structure stabilization,” J. Alloys Compd., 875, 160004 (2021). https://doi.org/10.1016/j.jallcom.2021.160004CrossRef

T. Shimozaki, T. Okino, M. Yamane, et al., “Effect of diffusion barrier and impurities in titanium on the growth rate of TiAl₃ layer,” Defect and Diffusion Forum, 143 – 147, 591 – 596 (1997). https://doi.org/10.4028/www.scientific.net/ddf.143-147.591CrossRef

F. Foadian, M. Soltanieh, M. Adeli, and M. Etminanbakhsh, “The kinetics of TiAl₃ formation in explosively welded Ti – Al multilayers during heat treatment,” Metall. Mater. Trans. B, 47, 2931 – 2937 (2016). https://doi.org/10.1007/s11663-016-0710-1CrossRef

N. Thiyaneshwaran, K. Sivaprasad, and B. Ravisankar, “Nucleation and growth of TiAl₃ intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate,” Sci. Rep., 8, 16797 (2018). https://doi.org/10.1038/s41598-018-35247-0CrossRef

Y. Zhao, J. Li, R. Qui, and H. Shi, “Growth characterization of intermetallic compound at the Ti/Al solid state interface,” Materials, 12(3), 1 – 11 (2019). https://doi.org/10.3390/ma12030472CrossRef

D. J. Harach and K. S. Vecchio, “Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air,” Metall. Mater. Trans. A, 32, 1493 – 1505 (2001). https://doi.org/10.1007/s11661-001-0237-0CrossRef

10.

T. S. Ogneva, I. A. Bataev, and V. I. Mali, “Effect of sintering pressure and temperature on structure and properties of Ni Al metal-intermetallic composites produced by SPS,” Mater. Charact., 180, 111415 (2021). https://doi.org/10.1016/j.matchar.2021.111415CrossRef

11.

Y. Wang and K. S. Vecchio, “Microstructure evolution in Fe-based-aluminide metallic-intermetallic laminate (MIL) composites,” Mater. Sci. Eng. A, 649, 325 – 337 (2016). https://doi.org/10.1016/j.msea.2015.10.019CrossRef

12.

Y. Wang, S. Zhou, and K. S. Vecchio, “Annealing effects on the microstructure and properties of an Fe-based metallic-intermetallic laminate (MIL) composite,” Mater. Sci. Eng. A, 665, 47 – 58 (2016). https://doi.org/10.1016/j.msea.2016.04.03CrossRef

13.

H. Wang, R. Kou, H. Yi, et al., “Mesoscale hetero-deformation induced (HDI) stress in FeAl-based metallic-intermetallic laminate (MIL) composites,” Acta Mater., 213, 116949 (2021). https://doi.org/10.1016/j.actamat.2021.116949CrossRef

14.

Y.Wang and K. S. Vecchio, “Microstructure evolution in a martensitic 430 stainless steel-Al metallic-intermetallic laminate (MIL) composite,” Mater. Sci. Eng. A, 643, 72 – 85 (2015). https://doi.org/10.1016/j.msea.2015.07.014CrossRef

15.

A. Macwan, X. Q. Jiang, C. Li, and D. L. Chen, “Effect of annealing on interface microstructures and tensile properties of rolled Al/Mg/Al tri-layer clad steels,” Mater. Sci. Eng. A, 587, 344 – 351 (2013). https://doi.org/10.1016/j.msea.2013.09.002CrossRef

16.

Z. Chen, D. Wang, X. Cao, et al., “Influence of multi-pass rolling and subsequent annealing on the interface microstructure and mechanical properties of the explosive welding Mg/Al composite plates,” Mater. Sci. Eng. A, 723, 97 – 108 (2018). https://doi.org/10.1016/j.msea.2018.03.042CrossRef

17.

Z. F. Li, J. Dong, X. Q. Zeng, et al., “Influence of strong static magnetic field on intermediate phase growth in Mg – Al diffusion couple,” J. Alloys Compd., 440, 132 – 136 (2007). https://doi.org/10.1016/j.jallcom.2006.09.032CrossRef

18.

N. L. Glinka, The General Chemistry [in Russian], Khimiya, Leningrad (1980), 718 p.

19.

V. S. Srivastava, T. Singh, S. Ghosh Chowdhury, and V. Jindal, “Microstructural characteristics of accumulative roll-bonded Ni – Al-based metal-intermetallic laminate composite,” J. Mater. Eng. Perform., 21, 1912 – 1918 (2012). https://doi.org/10.1007/s11665-011-0114-y

20.

F. Takeda and T. Nakajima, “Preparation of Ti – Al gradient composite films by sputtering,” Thin Solid Films, 316, 68 – 72 (1998). https://doi.org/10.1016/S0040-6090(98)00391-5CrossRef

21.

I. A. Bataev, A. A. Bataev, V. I. Mali, and D. V. Pavlikova, “Structure and mechanical properties of metallic-intermetallic laminate composites produced by explosive welding and annealing,” Mater. Des., 35, 225 – 234 (2012). https://doi.org/10.1016/j.matdes.2011.09.030CrossRef

22.

D. M. Fronczek, J. Wojewoda-Budka, R. Chulist, et al., “Structural properties of Ti/Al clads manufactured by explosive welding and annealing,” Mater. Des., 91, 80 – 89 (2016). https://doi.org/10.1016/j.matdes.2015.11.087CrossRef

23.

H.-S. Ding, J.-M. Lee, B.-R. Lee, et al., “Processing and microstructure of TiNi SMA strips prepared by cold roll-bonding and annealing of multilayer,” Mater. Sci. Eng. A, 408, 182 – 189 (2005). https://doi.org/10.1016/j.msea.2005.07.055CrossRef

24.

V. I. Lysak and S. V. Kuz’min, Explosive Welding [in Russian], Mashinostroenie, Moscow (2005), 543 p.

25.

M. Konieczny, R. Mola, P. Tomas, and M. Kopcial, “Processing, microstructure and properties of laminated Ni-intermetallic composites synthesised using Ni Sheets and Al foils,” Arch. Metall. Mater., 56, 693 – 702 (2011). https://doi.org/10.2478/v10172-011-0076-yCrossRef

26.

L. M. Gurevich, V. G. Shmorgun, O. V. Slautin, and A. I. Bogdanov, Laminated Intermetallic Composites and Coatings [in Russian], Metallurgizdat, Moscow (2016), 346 p.

27.

A. A. Deribas, The Physics of Hardening and ExplosiveWelding [in Russian], Nauka, Novosibirsk (1980), 207 p.

28.

A. Mehta, J. Dickson, R. Newell, et al., “Interdiffusion and reaction between Al and Zr in the temperature range of 425 to 475°C,” J. Phase Equil. Diff., 40, 482 – 494 (2019). https://doi.org/10.1007/s11669-019-00729-9CrossRef

29.

J. Dickson, L. Zhou, A. Pazy Puente, et al., “Interdiffusion and reaction between Zr and Al alloys from 425 to 625°C,” Intermetallics, 49, 154 – 162 (2014). https://doi.org/10.1016/j.intermet.2013.12.012

30.

G. V. Kidson and G. D. Miller, “A study of the interdiffusion of aluminum and zirconium,” J. Nucl. Mater., 12, 61 – 69 (1964). https://doi.org/10.1016/0022-3115(64)90108-4CrossRef

31.

A. Laik, K. Bhanumurthy, and G. Kale, “Intermetallics in the Zr – Al diffusion zone,” Intermetallics, 12, 69 – 74 (2004). https://doi.org/10.1016/j.intermet.2003.09.002CrossRef

32.

J. Maas, G. Bastin, F. van Lao, and R. Metselaar, “The texture in diffusion-grown layers of trialuminides MeAl₃ (Me = Ti, V, Ta, Nb, Zr, Hf) and VNi₃,” Int. J. Mater. Res., 74, 294 – 299 (1983). https://doi.org/10.1515/ijmr-1983-740506CrossRef

33.

J. P. Perdew, K. Burke, and M. Ernzerhof, “Generalized gradient approximation made simple,” Phys. Rev. Lett., 77, 3865 – 3868 (1996). https://doi.org/10.1103/PhysRevLett.77.3865CrossRef

34.

P. E. Blöchl, “Projector augmented-wave method,” Phys. Rev. B, 50, 17953 – 17979 (1994). https://doi.org/10.1103/PhysRevB.50.17953CrossRef

35.

J. Enkovaara, C. Rostgaard, J. J. Mortensen, et al., “Electronic structure calculations with GPAW: a real-space implementation of the projector augmented-wave method,” J. Phys., Cond. Matter, 22, 253202 (2010). https://doi.org/10.1088/0953-8984/22/25/253202

36.

A. Hjorth Larsen, J. J. Mortensen, J. Blomqvist, et al., “The atomic simulation environment – a Python library for working with atoms,” J. Phys., Cond. Matter, 29, 273002 (2017). https://doi.org/10.1088/1361-648X/aa680e

37.

W. C. Oliver and G. M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” J. Mater. Res., 7, 1564 – 1583 (1992). https://doi.org/10.1557/JMR.1992.1564CrossRef

38.

S. V. Kuz’min, V. I. Lysak, V. V. Rybin, and A. P. Peev, “Special features of plastic deformation of the metal of near-weld zone in explosive welding of dissimilar materials,” Izv. VolgGTU, 5, 4 – 11 (2010).

39.

B. A. Grinberg and M. A. Ivanov, “Interface inhomogeneities in explosive welding,” Fiz. Met. Metalloved., 113, 187 – 200 (2012).

40.

V. I. Lysak, S. V. Kuz’min, A. V. Krokhalev, and B. A. Grinberg, “Structure of boundaries in composite materials obtained using explosive loading,” Fiz. Met. Metalloved., 114, 1026 – 1031 (2013).

41.

B. A. Grinberg, M. A. Ivanov, S. V. Kuz’min, and V. I. Lysak, Explosive Welding: Processes and Structures [in Russian], Innovatsionnoe Mashinostroenie, Moscow (2017), 236 p.

42.

I. A. Bataev, D. V. Lazurenko, S. Tanaka, et al., “High cooling rates and metastable phases at the interfaces of explosively welded materials,” Acta Mater., 135, 277 – 289 (2017). https://doi.org/10.1016/j.actamat.2017.06.038CrossRef

43.

R. Addaschain, L. Addaschian, and R. E. Reed-Hill, Physical Metallurgy Principles, Cengage Learning (2009), 750 p.

44.

V. I. Anur’ev, A Handbook for Designer and Machine Builder [in Russian], Mashinostrienie, Moscow (2001), Vol. 1, 920 p.

45.

I. K. Kikoin, Tables of Physical Quantities, A Reference Book [in Russian], Atomizdat, Moscow (1976), 1008 p.

46.

A. Priyadarshi, M. Khvari, T. Subrotoet al., “On the governing fragmentation mechanism of primary intermetallics by induced cavitation,” Ultrason. Sonochemistry, 70, 105260 (2021). https://doi.org/10.1016/j.ultsonch.2020.105260CrossRef

47.

J. Wang, S.-L. Shang, Y. Wang, et al., “First-principles calculations of binary Al compounds: Enthalpies of formation and elastic properties,” Calphad, 35, 562 – 573 (2011). https://doi.org/10.1016/j.calphad.2011.09.009CrossRef

48.

M. Nakamura and K. Kimura, “Elastic constants of TiAl₃ and ZrAl₃ single crystals,” J. Mater. Sci., 26, 2208 – 2214 (1991). https://doi.org/10.1007/BF00549190CrossRef

Titel: Structure and Phase Composition of Heat Treated Al – Zr Bimetal
verfasst von: Yu. Yu. Emurlaeva
M. N. Khomyakov
N. S. Aleksandrova
K. I. Emurlaev
I. A. Bataev
Publikationsdatum: 20.12.2023
Verlag: Springer US
Erschienen in: Metal Science and Heat Treatment / Ausgabe 7-8/2023
Print ISSN: 0026-0673
Elektronische ISSN: 1573-8973
DOI: https://doi.org/10.1007/s11041-023-00952-9

Premium Partner

Marktübersichten

Die im Laufe eines Jahres in der „adhäsion“ veröffentlichten Marktübersichten helfen Anwendern verschiedenster Branchen, sich einen gezielten Überblick über Lieferantenangebote zu verschaffen.

Zur Marktübersicht

Springer Professional

Abstract

Bitte loggen Sie sich ein, um Zugang zu Ihrer Lizenz zu erhalten.

Sie haben noch keine Lizenz? Dann Informieren Sie sich jetzt über unsere Produkte:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Weitere Artikel der Ausgabe 7-8/2023

Size Scatter of Disperse Particles: Influence on Grain Growth

Evolution of Gradient Structure Under Heat Treatment of Metastable Austenitic Stainless Steel Subjected to Cold Radial Forging

Orientation Relationships and Changes in the Composition of S2 Titanium Silicides in Titanium Pseudo-β-Alloy VT47

Effect of Heat Treatment on the Phase Composition of Copper-Zinc Coating on Steels

Effect of Heat Treatment on the Hardness and Electrical Connectivity of an Aluminum Composite Reinforced with Al2O3 Nanoparticles

Structural States of Steel 316L in the Zone of Welded Joint

Premium Partner

Marktübersichten